11 Coolest Carbide Ball End Mills

 

Niagara Cutter DIAXRB430-0031-G4-B0-Z4 DIAXRB430 Carbide Ball End Mill CVDDIA Finish 2 Flutes 132 Cutting Diameter 18 Shank Diameter 3 Overall Length 332

Niagara Cutter DIAXRB430-0.031-G4-B.0-Z4 DIAXRB430 Carbide Ball End Mill, CVDDIA Finish, 2 Flutes, 1/32″ Cutting Diameter, 1/8″ Shank Diameter, 3″ Overall Length, 3/32″

Niagara Cutter DIAXRB430-0.031-G4-B.0-Z4 DIAXRB430 Carbide Ball End Mill, CVDDIA Finish, 2 Flutes, 1/32″ Cutting Diameter, 1/8″ Shank Diameter, 3″ Overall Length, 3/32″ - Ball nose end mills (also called ball end) create contoured surfaces. 30-degree helix provides the efficient cutting action and chip evacuation. Four flutes to produce a better finish than fewer flutes. Carbide can run at higher speeds than high-speed steel, resisting abrasion and high cutting temperatures. Diamondplus coated for the rough machining of carbon fiber, composites, graphite and green ceramic materials.

 

DZ BV4M 12 Regular Carbide Ball End Mill 2 Flutes TiAIN Coated

DZ BV4M 1/2″ Regular Carbide Ball End Mill, 2 Flutes, TiAIN Coated

DZ BV4M 1/2″ Regular Carbide Ball End Mill, 2 Flutes, TiAIN Coated - Length of cut 1″. Overall length 3″. Shank diameter 1/2″. 30 degree spiral angle. Size 1/2″.

 

Kodiak Cutting Tools O8-G61J-HPXK USA Made Ball Nose Premium Carbide End Mill AlTiN Coated 4 Flute 38 Diameter 38 Shank 1 Length of Cut 2-12 Overall Length

Kodiak Cutting Tools O8-G61J-HPXK USA Made Ball Nose Premium Carbide End Mill, AlTiN Coated, 4 Flute, 3/8″ Diameter, 3/8″ Shank, 1″ Length of Cut, 2-1/2″ Overall Length

Kodiak Cutting Tools O8-G61J-HPXK USA Made Ball Nose Premium Carbide End Mill, AlTiN Coated, 4 Flute, 3/8″ Diameter, 3/8″ Shank, 1″ Length of Cut, 2-1/2″ Overall Length - This coating is extremely heat resistant and can be used with or without coolant. 3/8″ shank 1″ length of cut 2-1/2″ overall length 4 flute carbide, altin coated diameter tolerance +. It is exceptional in difficult to machine materials where adhesive wear is particularly high. 000″/-. 0001″/-. 0004″altin is a high performance coating for milling, tapping and drilling in stainless steels, carbon steels, alloy steels, titanium and cast iron. 002″shank diameter tolerance -.

 

Niagara Cutter CB330-0250-D3-B0-Z3 CB330 Carbide Ball End Mill Uncoated Bright Finish 3 Flutes 14 Cutting Diameter 14 Shank Diameter 2-12 Overall Length 34

Niagara Cutter CB330-0.250-D3-B.0-Z3 CB330 Carbide Ball End Mill, Uncoated (Bright) Finish, 3 Flutes, 1/4″ Cutting Diameter, 1/4″ Shank Diameter, 2-1/2″ Overall Length, 3/4″

Niagara Cutter CB330-0.250-D3-B.0-Z3 CB330 Carbide Ball End Mill, Uncoated (Bright) Finish, 3 Flutes, 1/4″ Cutting Diameter, 1/4″ Shank Diameter, 2-1/2″ Overall Length, 3/4″ - Center cutting end mills are designed with “end teeth” making these ideal for slotting and cavity applications. Made of extra-fine grade carbide for ultra high transverse rupture strength. Titanium aluminum nitride (tialn) coating lubricates the end mill for high-temperature stability and abrasion resistance at high cutting speeds. 3 flute design makes these end mills ideal for finishing work. General purpose end mill for working on all types of materials.

 

Niagara Cutter CB330-0219-F3-B0-Z3 CB330 Carbide Ball End Mill Uncoated Bright Finish 3 Flutes 732 Cutting Diameter 14 Shank Diameter 2-12 Overall Length 58

Niagara Cutter CB330-0.219-F3-B.0-Z3 CB330 Carbide Ball End Mill, Uncoated (Bright) Finish, 3 Flutes, 7/32″ Cutting Diameter, 1/4″ Shank Diameter, 2-1/2″ Overall Length, 5/8″

Niagara Cutter CB330-0.219-F3-B.0-Z3 CB330 Carbide Ball End Mill, Uncoated (Bright) Finish, 3 Flutes, 7/32″ Cutting Diameter, 1/4″ Shank Diameter, 2-1/2″ Overall Length, 5/8″ - General purpose end mill for working on all types of materials. Center cutting end mills are designed with “end teeth” making these ideal for slotting and cavity applications. Made of extra-fine grade carbide for ultra high transverse rupture strength. 3 flute design makes these end mills ideal for finishing work. Titanium aluminum nitride (tialn) coating lubricates the end mill for high-temperature stability and abrasion resistance at high cutting speeds.

 

Kodiak Cutting Tools KCT133527 USA Made  Ball Nose Premium Carbide End Mill AlTiN Coated 4 Flute 12 Shank 1 Length of Cut 3 Overall Length 12 Diameter

Kodiak Cutting Tools KCT133527 USA Made Ball Nose Premium Carbide End Mill, AlTiN Coated, 4 Flute, 1/2″ Shank, 1″ Length of Cut, 3″ Overall Length, 1/2″ Diameter

Kodiak Cutting Tools KCT133527 USA Made Ball Nose Premium Carbide End Mill, AlTiN Coated, 4 Flute, 1/2″ Shank, 1″ Length of Cut, 3″ Overall Length, 1/2″ Diameter - 000″/-. 0004″altin is a high performance coating for milling, tapping and drilling in stainless steels, carbon steels, alloy steels, titanium and cast iron. 0001″/-. This coating is extremely heat resistant and can be used with or without coolant. It is exceptional in difficult to machine materials where adhesive wear is particularly high. 1/2 inch diameter solid carbide end mill, coated 1/2″ shank 1″ length of cut 3″ overall length 4 flute carbide, altin coated diameter tolerance +. 002″shank diameter tolerance -.

 

Niagara Cutter CB330-0250-D3-B0-Z3 TiAlN CB330 Carbide Ball End Mill Uncoated Bright Finish 3 Flutes 14 Cutting Diameter 14 Shank Diameter 2-12 Overall Length 34

Niagara Cutter CB330-0.250-D3-B.0-Z3, TiAlN CB330 Carbide Ball End Mill, Uncoated (Bright) Finish, 3 Flutes, 1/4″ Cutting Diameter, 1/4″ Shank Diameter, 2-1/2″ Overall Length, 3/4″

Niagara Cutter CB330-0.250-D3-B.0-Z3, TiAlN CB330 Carbide Ball End Mill, Uncoated (Bright) Finish, 3 Flutes, 1/4″ Cutting Diameter, 1/4″ Shank Diameter, 2-1/2″ Overall Length, 3/4″ - Center cutting end mills are designed with “end teeth” making these ideal for slotting and cavity applications. Made of extra-fine grade carbide for ultra high transverse rupture strength. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. 3 flute design makes these end mills ideal for finishing work. General purpose end mill for working on all types of materials.

 

Kodiak Cutting Tools KCT133351 USA Made  Ball Nose Premium Carbide End Mill AlTiN Coated 4 Flute 14 Shank 34 Length of Cut 2-12 Overall Length 14 Diameter

Kodiak Cutting Tools KCT133351 USA Made Ball Nose Premium Carbide End Mill, AlTiN Coated, 4 Flute, 1/4″ Shank, 3/4″ Length of Cut, 2-1/2″ Overall Length, 1/4″ Diameter

Kodiak Cutting Tools KCT133351 USA Made Ball Nose Premium Carbide End Mill, AlTiN Coated, 4 Flute, 1/4″ Shank, 3/4″ Length of Cut, 2-1/2″ Overall Length, 1/4″ Diameter - 002″shank diameter tolerance -. 0001″/-. 000″/-. 0004″altin is a high performance coating for milling, tapping and drilling in stainless steels, carbon steels, alloy steels, titanium and cast iron. This coating is extremely heat resistant and can be used with or without coolant. It is exceptional in difficult to machine materials where adhesive wear is particularly high. 1/4 inch diameter solid carbide end mill, coated 1/4″ shank 3/4″ length of cut 2-1/2″ overall length 4 flute carbide, altin coated diameter tolerance +.

 

Niagara Cutter CB330-0500-D2-B0-Z3 TiAlN CB330 Carbide Ball End Mill TiAlN Finish 3 Flutes 12 Cutting Diameter 12 Shank Diameter 3 Overall Length 1

Niagara Cutter CB330-0.500-D2-B.0-Z3, TiAlN CB330 Carbide Ball End Mill, TiAlN Finish, 3 Flutes, 1/2″ Cutting Diameter, 1/2″ Shank Diameter, 3″ Overall Length, 1″

Niagara Cutter CB330-0.500-D2-B.0-Z3, TiAlN CB330 Carbide Ball End Mill, TiAlN Finish, 3 Flutes, 1/2″ Cutting Diameter, 1/2″ Shank Diameter, 3″ Overall Length, 1″ - Made of extra-fine grade carbide for ultra high transverse rupture strength. 3 flute design makes these end mills ideal for finishing work. Center cutting end mills are designed with “end teeth” making these ideal for slotting and cavity applications. Titanium aluminum nitride (tialn) coating lubricates the end mill for high-temperature stability and abrasion resistance at high cutting speeds. General purpose end mill for working on all types of materials.

 

Kodiak Cutting Tools KCT133032 USA Made Solid Carbide Ball Nose End Mill 4 Flute 38 Shank 1 Length of Cut 2-12 Overall Length 38 Diameter

Kodiak Cutting Tools KCT133032 USA Made Solid Carbide Ball Nose End Mill, 4 Flute, 3/8″ Shank, 1″ Length of Cut, 2-1/2″ Overall Length, 3/8″ Diameter

Kodiak Cutting Tools KCT133032 USA Made Solid Carbide Ball Nose End Mill, 4 Flute, 3/8″ Shank, 1″ Length of Cut, 2-1/2″ Overall Length, 3/8″ Diameter - 000″/-. 0001″/-. 3/8 inch diameter ball nose solid carbide end mill, single end 3/8″ shank 1″ length of cut 2-1/2″ overall length 4 flute carbide, single end diameter tolerance +. 002″shank diameter tolerance -. 0004″.

 

Niagara Cutter CB330-0625-D2-B0-Z3 TiAlN CB330 Carbide Ball End Mill Uncoated Bright Finish 3 Flutes 58 Cutting Diameter 58 Shank Diameter 3-12 Overall Length 1-14

Niagara Cutter CB330-0.625-D2-B.0-Z3, TiAlN CB330 Carbide Ball End Mill, Uncoated (Bright) Finish, 3 Flutes, 5/8″ Cutting Diameter, 5/8″ Shank Diameter, 3-1/2″ Overall Length, 1-1/4″

Niagara Cutter CB330-0.625-D2-B.0-Z3, TiAlN CB330 Carbide Ball End Mill, Uncoated (Bright) Finish, 3 Flutes, 5/8″ Cutting Diameter, 5/8″ Shank Diameter, 3-1/2″ Overall Length, 1-1/4″ - Made of extra-fine grade carbide for ultra high transverse rupture strength. 3 flute design makes these end mills ideal for finishing work. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Center cutting end mills are designed with “end teeth” making these ideal for slotting and cavity applications. General purpose end mill for working on all types of materials.