15 Greatest Patch Fittings for 2020

 

CR LAURENCE PTH22A CRL Clear Anodized PTH Series Top Door Patch Fitting #ad

C.R. LAURENCE PTH22A CRL Clear Anodized PTH Series Top Door Patch Fitting

C.R. LAURENCE PTH22A CRL Clear Anodized PTH Series Top Door Patch Fitting #ad - This fitting is commonly used with either a pth23 top transom pivot, crl9040wbp walking beam pivot, 1nt401 top free swinging pivot, or 1nt405 header mount top pivot. This crl pth series top door patch fitting includes a high density cast body, pivot socket, finished cover plate, and gaskets for 3/8 and 1/2 inch (10 and 12 millimeter) glass.

 

CRL CPF20APS Polished Stainless Curved Top Door Patch Fitting with 1NT303 Insert #ad

CRL CPF20APS Polished Stainless Curved Top Door Patch Fitting with 1NT303 Insert

CRL CPF20APS Polished Stainless Curved Top Door Patch Fitting with 1NT303 Insert #ad - The following guidelines are to be used when making a door using this hardware maximum height 102″ (2591mm) maximum weight 194 lbs (88kg) maximum width 42″ (1092mm) if the door exceeds any of these limitations, full door rails should be used. Glass fabrication required one 3/4″ (19 mm) diameter hole and corner notchcomes with template and instructions important notes these fittings are not for use with laminated glass. Gaskets are supplied that allow this patch fitting to be used with either 3/8″ or 1/2″ (10 or 12 mm) glass. The crl curved top door patch fitting includes the 1nt303 insert for use with our crl9040wbp top walking beam pivot, 1nt401 surface mount top pivot, 1nt405 threaded top pivot, or other 19/32″ (15 mm) diameter type pivots.

 

CRL CRL380HBS Brushed Stainless Hydraulic Patch Fitting with 2-916 Setback - 90º Hold Open Model #ad

CRL CRL380HBS Brushed Stainless Hydraulic Patch Fitting with 2-9/16″ Setback – 90º Hold Open Model

CRL CRL380HBS Brushed Stainless Hydraulic Patch Fitting with 2-9/16″ Setback – 90º Hold Open Model #ad - Glass fabrication (cut-out) is required. Important notes custom headers with 2-9/16″ [65 mm] pivot points must be ordered if needed. There are two adjustment screws to adjust the latching speed and the swing speed. Crl380 series hydraulic patch fittings are medium duty for interior use. Fitting can accommodate 3/8″ (10 mm), and 1/2″ (12 mm) tempered glass. The hydraulic patch fitting is designed for installation without the need for any other floor or overhead closing devices. These fittings are not compatible with the stock nh36xx and nh72xx. Maximum door width is 39″ (1 m) and maximum weight is 220 lbs (100kg).

 

NHN ModelKPF-2P-PSS Top Patch Fitting for Glass Door Polished Stainless Steel Finish #ad

NHN Model:KPF-2P-PSS Top Patch Fitting for Glass Door, Polished Stainless Steel Finish

NHN Model:KPF-2P-PSS Top Patch Fitting for Glass Door, Polished Stainless Steel Finish #ad - Prepare suitable cutout on the door/door frame according to the drawing. Top patch fitting for glass door. Polished stainless steel finish. Same size as pdc100 pivot door closer.

 

CR LAURENCE 0PF10RPS CRL Polished Stainless Right Offset Bottom Door Patch Fitting #ad

C.R. LAURENCE 0PF10RPS CRL Polished Stainless Right Offset Bottom Door Patch Fitting

C.R. LAURENCE 0PF10RPS CRL Polished Stainless Right Offset Bottom Door Patch Fitting #ad - Also works with crl 3/4″ (19 mm) offset arm bottom door rails with no alterations. For 3/8″ or 1/2″ (10 or 12 mm) glassallows for 180 degree door swingalso works with crl 3/4″ (19 mm) offset arm bottom door rails with no alterations. For use with 3/8″ (10 mm) or 1/2″ (12 mm) thick glassmolded body and finished cover plate. For ph34 wall mounted transom patch fittings. Used for ph10, ph11, ph20, ph21 patch fittings.

 

CRL Brushed Stainless Finish Patch Fitting Replacement Cover for PH34 #ad

CRL Brushed Stainless Finish Patch Fitting Replacement Cover for PH34

CRL Brushed Stainless Finish Patch Fitting Replacement Cover for PH34 #ad - For ph34 wall mounted transom patch fittings. For use with 3/8″ (10 mm) or 1/2″ (12 mm) thick glassmolded body and finished cover plate. Used for ph10, ph11, ph20, ph21 patch fittings. For 3/8″ or 1/2″ (10 or 12 mm) glassallows for 180 degree door swingalso works with crl 3/4″ (19 mm) offset arm bottom door rails with no alterations. Also works with crl 3/4″ (19 mm) offset arm bottom door rails with no alterations.

 

CR LAURENCE PTH21BS CRL Brushed Stainless PTH Series Bottom Door Patch Fitting #ad

C.R. LAURENCE PTH21BS CRL Brushed Stainless PTH Series Bottom Door Patch Fitting

C.R. LAURENCE PTH21BS CRL Brushed Stainless PTH Series Bottom Door Patch Fitting #ad - Crl pth series bottom door patch fitting includes high density cast body, floor closer type insert, finished cover plate, and gaskets for 3/8″ and 1/2″ (10 and 12 mm) glass. C. This fitting is commonly used with either crl8300, crl8400 or crl8500 series floor closers,1nt402 bottom free swinging pivot, or 1nt406 adjustable free swing bottom pivot and j990 series door closers 7/8″ (22. 2 mm) flat tapered spindles. Laurence pth21bs crl brushed stainless pth series bottom door patch fitting. R.

 

Hydraulic Patch Fitting Full Set with TOP Patch and PIN Heavy Duty Brushed Stainless for Glass Doors #ad

Hydraulic Patch Fitting Full Set with TOP Patch and PIN Heavy Duty Brushed Stainless for Glass Doors

Hydraulic Patch Fitting Full Set with TOP Patch and PIN Heavy Duty Brushed Stainless for Glass Doors #ad - (220lb) suitable door width 750~1250mm (29-1/2-49-3/16) suitable door thickness 10~15mm (3/8″-9/16″) ambient temperature 20°c~+50°c quick and easy installation compliant as per en1154 european standards hold open 90° finish sss/pss. Heavy duty hydraulic patch full set for glass doors floor spring for frameless look suitable door weight max 100kg.

 

CR LAURENCE GS103 CRL Replacement Set of Gaskets and Grommets for PH40 Sidelite Mounted Transom Patch Fittings #ad

C.R. LAURENCE GS103 CRL Replacement Set of Gaskets and Grommets for PH40 Sidelite Mounted Transom Patch Fittings

C.R. LAURENCE GS103 CRL Replacement Set of Gaskets and Grommets for PH40 Sidelite Mounted Transom Patch Fittings #ad - Also works with crl 3/4″ (19 mm) offset arm bottom door rails with no alterations. For 3/8″ or 1/2″ (10 or 12 mm) glassallows for 180 degree door swingalso works with crl 3/4″ (19 mm) offset arm bottom door rails with no alterations. For ph40 sidelite mounted transom patch fittings. For use with 3/8″ (10 mm) or 1/2″ (12 mm) thick glassmolded body and finished cover plate. Used for ph10, ph11, ph20, ph21 patch fittings.

 

CRL Aluminum Finish Patch Fitting Replacement Cover for PH34 #ad

CRL Aluminum Finish Patch Fitting Replacement Cover for PH34

CRL Aluminum Finish Patch Fitting Replacement Cover for PH34 #ad - For ph34 wall mounted transom patch fittings. For use with 3/8″ (10 mm) or 1/2″ (12 mm) thick glassmolded body and finished cover plate. For ph34 wall mounted transom patch fittings. Used for ph10, ph11, ph20, ph21 patch fittings. For 3/8″ or 1/2″ (10 or 12 mm) glassallows for 180 degree door swingalso works with crl 3/4″ (19 mm) offset arm bottom door rails with no alterations.

 

CRL Aluminum Adjustable North AmericanTop Door Patch Fitting #ad

CRL Aluminum Adjustable North AmericanTop Door Patch Fitting

CRL Aluminum Adjustable North AmericanTop Door Patch Fitting #ad - Hold open model suitable for a glass door 5/16-1/2inch thick, 30-393inch wide and a maximum weight of 220lbs. Simple final adjustments. 493 in door width version is also available search pdc105 or pdc105-s. For 3/8″ or 1/2″ (10 or 12 mm) glass. For 3/8″ or 1/2″ (10 or 12 mm) glassinsert is adjustable up to 3 degrees for proper door alignment.

 

CRL Polished Stainless Adjustable North AmericanTop Door Patch Fitting #ad

CRL Polished Stainless Adjustable North AmericanTop Door Patch Fitting

CRL Polished Stainless Adjustable North AmericanTop Door Patch Fitting #ad - Finished covers are available in five standard finishes. Laurence ph20cps crl polished stainless adjustable north american top door patch fitting. R. The crl adjustable top door patch fitting includes an adjustable pivot insert that allows for 3 degrees of movement for proper alignment of the door to the jamb when in the closed position. For use with our crl9970 overhead concealed door closer. Gaskets are supplied that allow this patch fitting to be used with either 3/8″ or 1/2″ (10 or 12 mm) glass. C.

 

CRL Polished Stainless Right Offset Top Door Patch Fitting - 0PF20RPS #ad

CRL Polished Stainless Right Offset Top Door Patch Fitting – 0PF20RPS

CRL Polished Stainless Right Offset Top Door Patch Fitting – 0PF20RPS #ad - Glass fabrication templates are included in the box. Includes -high density cast body -cover plates (finish of your choice) -gasket for 3/8 in (10 mm) or 1/2 in (12 mm) glass -template and instructions specifications for use with -0pf40 transom patch fittings -1nt401 surface mounted top pivot -1nt405 threaded top pivot glass fabrication required -one 3/4 in (19 mm) diameter hole and corner notch. The crl top of door offset patch fitting is specifically designed to work with crl offset arm bottom door rails, with no alterations required. Allowing for a full 180º door swing, these fittings are available for right or left hand configurations, in your choice of brushed or polished stainless steel. It will also work with other offset patch fittings.

 

CRL PTH Series Clear Anodized Finish Patch Fitting Glass Connector #ad

CRL PTH Series Clear Anodized Finish Patch Fitting Glass Connector

CRL PTH Series Clear Anodized Finish Patch Fitting Glass Connector #ad - Crl pth series patch fitting glass connector includes molded body, finished cover plates, and gaskets for 3/8 inch and 1/2 inch (10 and 12 millimeter) glass. This fitting joins vertical lites of heavy glass in transoms and sidelites to provide rigidity.

 

CRL Polished Brass Adjustable European Top Door Patch Fitting #ad

CRL Polished Brass Adjustable European Top Door Patch Fitting

CRL Polished Brass Adjustable European Top Door Patch Fitting #ad - 09 m) if the door exceeds any of these limitations, full door rails should be used. Glass fabrication required one 3/4″ (19 mm) diameter hole and corner notchcomes with template and instructions important notes these fittings are not for use with laminated glass. For use with our crl9970 overhead concealed door closer. The following guidelines are to be used when making a door using this hardware maximum height 102″ (2. 59 m) maximum height 176 lbs. The following guidelines are to be used when making a 1/2″ glass door using this hardware maximum height 102″ (2. The crl adjustable top door patch fitting includes an adjustable pivot insert that allows for 3 degrees of movement for proper alignment of the door to the jamb when in the closed position. 59 m) maximum weight 194 lbs. (80 kg) maximum width 42″ (1. Gaskets are supplied that allow this patch fitting to be used with either 3/8″ or 1/2″ (10 or 12 mm) glass. 09 m) if the door exceeds any of these limitations, full door rails should be used. (88 kg) maximum width 42″ (1. Finished covers are available in five standard finishes.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.