15 Top Diamond Corings

 

1-12 Diamant Boart Ultra GB Wet Diamond Coring Bit

1-1/2″ Diamant Boart Ultra GB Wet Diamond Coring Bit

1-1/2″ Diamant Boart Ultra GB Wet Diamond Coring Bit - We recommend a template be used when drilling free-hand and a scrap piece of stone be clamped under the stone to prevent excessive chipping on the back. Designed for drilling the faucet-mounting holes in counter tops and vanities, and to make clean rounded corners for square or rectangular sinkholes.

 

Milwaukee 4004 Diamond Coring Motor 300600 RPM 20 Amp with Clutch

Milwaukee 4004 Diamond Coring Motor 300/600 RPM, 20 Amp with Clutch

Milwaukee 4004 Diamond Coring Motor 300/600 RPM, 20 Amp with Clutch - Limited warranty, 30-day no-risk trial. Clutch protection protects gears and motor. Built-in water swivel. The product is durable. Two speeds 300 and 600 rpm, 20 amp motor, clutch protection protects gears and motor, built-in water swivel. The product is manufactured in united states. The product is easy to use. Built-in water swivel, water hose adapter, water control valve, open end wrench.

 

DRY Type 175 Diamond DRY Coring Bit - Concrete Core Drill by BLUEROCK Â Tools

DRY Type 1.75″ Diamond DRY Coring Bit – Concrete Core Drill by BLUEROCK ® Tools

DRY Type 1.75″ Diamond DRY Coring Bit – Concrete Core Drill by BLUEROCK ® Tools - It’s designed to drill through concrete, masonry, assorted brick and block as well as other types of rock. New, dry type 1. It uses the standard 5/8″ 11 unc threads used by most concrete core drills. It’s a high quality bit that’s made to last. Thanks for the interest. The overall length is 11″ with the inside measuring around 10″ in depth. If you have any questions, please feel free to contact us. . 75″ bluerock tools diamond coring bit for core drill, new this is a brand new “dry” type concrete coring bit.

 

SEPTLS4954136 - Milwaukee electric tools Vac-U-Rig Diamond Coring Rigs - 4136

SEPTLS4954136 – Milwaukee electric tools Vac-U-Rig Diamond Coring Rigs – 4136

SEPTLS4954136 – Milwaukee electric tools Vac-U-Rig Diamond Coring Rigs – 4136 - Large base with wheels. Does not include motor. Jack screw. 47 adjustable tilting column. For use with diamond coring motors. Base can be floor or wall mounted with bolt type anchor. Bubble level. 4-leveling screws. Motor mounting cradle. Vac-u-rig attachment kit. 4-spoke wheel feed control.

 

DRY Type 1 Diamond DRY Coring Bit - Concrete Core Drill by BLUEROCK Â Tools

DRY Type 1″ Diamond DRY Coring Bit – Concrete Core Drill by BLUEROCK ® Tools

DRY Type 1″ Diamond DRY Coring Bit – Concrete Core Drill by BLUEROCK ® Tools - The overall length is 11″ with the inside measuring around 10″ in depth. It uses the standard 5/8″ 11 unc threads used by most concrete core drills. New, dry type 1″ bluerock tools diamond coring bit for core drill, new this is a brand new “dry” type concrete coring bit. Thanks for the interest. It’s designed to drill through concrete, masonry, assorted brick and block as well as other types of rock. It’s a high quality bit that’s made to last. If you have any questions, please feel free to contact us.

 

Milwaukee 49-67-0110 Spacer Assembly for 4125 4130 and 4136 Diamond Coring Rigs Only

Milwaukee 49-67-0110 Spacer Assembly for 4125, 4130, and 4136 Diamond Coring Rigs Only

Milwaukee 49-67-0110 Spacer Assembly for 4125, 4130, and 4136 Diamond Coring Rigs Only - Increase bit capacity from 10 in to 14 in. The product is easy to use. Mounts between cradle and motor. For use with diamond coring rigs 4125, 4130, and 4136 only. The product is durable. The product is manufactured in united states.

 

Hilti 249118 DD 110-W Diamond Coring Tool

Hilti 249118 DD 110-W Diamond Coring Tool

Hilti 249118 DD 110-W Diamond Coring Tool - Ideal for fast, wet drilling in reinforced concrete and masonry using hwc diamon core bits. Bi+ quick lock chuck system allows keyless exchange of core bits. The compact design is also low weight which allows for easy handling and allows longer usage. The high motor performance and sturdy 2-speed gearing for optimum drilling speed.

 

HILTI DD120 DIAMOND CORING SYSTEM

HILTI DD120 DIAMOND CORING SYSTEM

HILTI DD120 DIAMOND CORING SYSTEM - Compact, lightweight unit for extremely easy handling. Exceptionally user-friendly thanks to self-explanatory features and controls. Easy to transport and set up. 2-speed gearing for optimum speed and torque. More reliable and lower repair costs the service indicator shows when servicing is due.

 

58 11 UNC to 12 Shank Adapter for Diamond Coring Bits - Concrete Core Drill

5/8″ 11 UNC to 1/2″ Shank Adapter for Diamond Coring Bits – Concrete Core Drill

5/8″ 11 UNC to 1/2″ Shank Adapter for Diamond Coring Bits – Concrete Core Drill - It’s a high quality adapter that’s made to last. Red core bits pictured are not included> if you have any questions, please feel free to contact us. New, dry type 5/8″ 11 unc to 1/2″ shank adapter for diamond coring bits, new this is a brand new 5/8″ 11 unc to 1/2″ shank adapter for concrete coring bits. These are used to convert coring bits to drills that use chucks. Thanks for the interest.

 

Diamond Coring Rig 239 Hp 120 V 15 A

Diamond Coring Rig, 239 Hp, 120 V, 15 A,

Diamond Coring Rig, 239 Hp, 120 V, 15 A, - , When precision is needed or a large number of holes is required. 3, amps @ 120v 15, no load rpm 540, core bit cap concrete 6 in, base size 10 1/2 x 16 1/4 in, column dia 1 3/4 x 2 1/2 in, column height 31 in, overall depth 19 in, overall height 33 in, overall width 10 1/2 in, tool weight 51 lb, single speed gearbox and electronic overload protection, mechanical clutch reduces risk of motor damage, v-groove roller carriage for accurate alignment, includes single speed gearbox and vacuum plate diamond coring rigscoring rigs with basefor holes up to 14″ in dia. Diamond coring rig, motor hp 2. 10″ and 16″ capacity rigs have wheels, making the stand easy to transport and mount. 19″ drilling stroke with v-groove roller carriage produces accurate alignment with minimal adjustment.

 

DRY Type 4 Diamond DRY Coring Bit - Concrete Core Drill by BLUEROCK Â Tools

DRY Type 4″ Diamond DRY Coring Bit – Concrete Core Drill by BLUEROCK ® Tools

DRY Type 4″ Diamond DRY Coring Bit – Concrete Core Drill by BLUEROCK ® Tools - It’s a high quality bit that’s made to last. It’s designed to drill through concrete, masonry, assorted brick and block as well as other types of rock. The overall length is 11″ with the inside measuring around 10″ in depth. If you have any questions, please feel free to contact us. It uses the standard 5/8″ 11 unc threads used by most concrete core drills. New, dry type 4″ bluerock tools diamond coring bit for core drill, new this is a brand new “dry” type concrete coring bit. Thanks for the interest.

 

Hilti 03476075 DD 110-W Hand Held Dry Diamond Coring Tool System with Case

Hilti 03476075 DD 110-W Hand Held Dry Diamond Coring Tool System with Case

Hilti 03476075 DD 110-W Hand Held Dry Diamond Coring Tool System with Case - Wet coring in reinforced concrete and dry coring in concrete block. Slip clutch, overload protection and safety switch for maxium protection. High motor performance and rugged two-speed gearing for optimum drilling speed. Bi chuck for tool-free bit changes. Drills clean, accurate holes. Compact design and ligh weight for easy handling. Includes tool, bi chuck and water swivel, dust removal adaptor and 5/8-11 (bt) adapter for slotted dry bits in an impact resistant plastic tool box.

 

DRY Type 25 Diamond DRY Coring Bit - Concrete Core Drill by BLUEROCK Â Tools

DRY Type 2.5″ Diamond DRY Coring Bit – Concrete Core Drill by BLUEROCK ® Tools

DRY Type 2.5″ Diamond DRY Coring Bit – Concrete Core Drill by BLUEROCK ® Tools - It uses the standard 5/8″ 11 unc threads used by most concrete core drills. New, dry type 2. 5″ bluerock tools diamond coring bit for core drill, new this is a brand new “dry” type concrete coring bit. The overall length is 11″ with the inside measuring around 10″ in depth. It’s a high quality bit that’s made to last. It’s designed to drill through concrete, masonry, assorted brick and block as well as other types of rock. If you have any questions, please feel free to contact us. Thanks for the interest.

 

Milwaukee 4096 Diamond Coring Motor 450900 RPM 20 Amp with Clutch

Milwaukee 4096 Diamond Coring Motor 450/900 RPM, 20 Amp with Clutch

Milwaukee 4096 Diamond Coring Motor 450/900 RPM, 20 Amp with Clutch - The product is easy to use. Built-in water swivel, water hose adapter. The product is durable. Limited warranty, 30-day no-risk trial. Two speeds 450 and 900 rpm, 20 amp motor, clutch protection protects gears and motor, built-in water swivel. The product is manufactured in united states. Clutch protection protects gears and motor. Built-in water swivel.

 

HIlti 3535993 Floor saw blade DS-BF 36X1701 MXL diamond coring sawing

HIlti 3535993 Floor saw blade DS-BF 36X170/1″ MXL diamond coring sawing

HIlti 3535993 Floor saw blade DS-BF 36X170/1″ MXL diamond coring sawing - The product is easy to use. The product is manufactured in united states. Mounts between cradle and motor. For use with diamond coring rigs 4125, 4130, and 4136 only. Increase bit capacity from 10 in to 14 in. The product is durable.