15 Top Skew Chisels

 

12 Robert Sorby 810H Skew Chisel

1/2″ Robert Sorby #810H Skew Chisel

1/2″ Robert Sorby #810H Skew Chisel - Handles are oiled european beech with ergonomic octagonal cross section. Comes in retail packaging. All chisels blades are made from hardened highly allowed cr-mn steel and heat treated to hrc 55. Set includes straight skew, curved straight, 2 curves skews, curves v tool and curved gouge. This 6 piece carving set is manufactured by small tool maker in czech republic.

 

Crown 250W 34-Inch Oval Skew Chisel

Crown 250W 3/4-Inch Oval Skew Chisel

Crown 250W 3/4-Inch Oval Skew Chisel - High speed steel. Lasts up to 6 times as long as carbon tools. Made with heavy duty brass ferrules. Rockwell 62/64. Exceptional quality tools from crown hand tools ltd, sheffield, england.

 

Hurricane Woodturning Skew Chisel 12 Wide High Speed Steel w Handle HTT-116

Hurricane Woodturning Skew Chisel, 1/2″ Wide, High Speed Steel w Handle, HTT-116

Hurricane Woodturning Skew Chisel, 1/2″ Wide, High Speed Steel w Handle, HTT-116 - Compare these tools to others that sell for 2 to 3 times the price. Ships ready for you to final sharpen. This tool is from the hurricane standard series and is a great choice for beginning and intermediate woodturners. In addition to the high quality steel, hurricane turning tools have extra long handles, some as long at 16 inches. These tools compare with any hss tool on the market and are sold throughout the world. This is the 1/2 ” wide woodturning skew chisel made from 1/4″ thick high speed steel. They are made out of high speed steel for superior edge holding ability and will last 8x longer between sharpenings as compared to carbon steel. The handles are made from solid ash. Hurricane turning tools have become one of the leading brands of woodturning tools.

 

Narex Pair Right Left 12 mm 12 Skew Paring Chisels in Wooden Presentation Box 851662

Narex Pair Right & Left 12 mm 1/2″ Skew Paring Chisels in Wooden Presentation Box 851662

Narex Pair Right & Left 12 mm 1/2″ Skew Paring Chisels in Wooden Presentation Box 851662 - Handles made from super hard european hornbeam. Pair of chisels comes in a wooden presentation box. Contains both right and left skew chisel 12 mm 1/2″ wide. Bevel ground at 30 degree skew and a 25 degree bevel. Blades are made from fine-grained, nicely tempered chrome-manganese steel and hardened to rc 59.

 

Set of Skew Chisels Ø 06 mm 024 inch - 2 pcs - in wooden box

Set of Skew Chisels Ø 06 mm (0.24 inch) – 2 pcs – in wooden box

Set of Skew Chisels Ø 06 mm (0.24 inch) – 2 pcs – in wooden box - It can withstand heavy blows with a mallet. The forged blade is made of traditional cr-mn steel and is heat treated to 59 hrc. The ergonomic handle is made of hard and hefty hornbeam wood.

 

34 Robert Sorby 809H Oval Skew Chisel

3/4″ Robert Sorby #809H Oval Skew Chisel

3/4″ Robert Sorby #809H Oval Skew Chisel - . Ash handles offer firm hand control during use and brass ferrules prevent wood splitting from tool pressure. Overall lengths 17″ to 21″. This hss 3/4″ oval skew will keep a sharpened edge about six times longer than carbon steel and resist “blued” softening from overheating during grinding or from heavy turning.

 

34 Robert Sorby 810 Skew Chisel Blade

3/4″ Robert Sorby #810 Skew Chisel Blade

3/4″ Robert Sorby #810 Skew Chisel Blade - High speed steel (hss) blade is 1/4″ thick. Superb for large spindle work, such as kitchen table legs or newel posts. Standard tip grind. The robert sorby standard skew blade is for turners who prefer to make their own turning tool handles, or for use in sorby’s sovereign system handles. Made in england. A tang collet adapter (#85406) is required for use with the sovereign system. Rectangular section profile gives it more weight. Scraper is tanged at one end and measures approximately 8″ long overall.

 

Hurricane Turning Tools Woodturning Three Piece Skew Chisel Set 12 Skew Chisel 1 Skew Chisel 1 12 Skew Chisel High Speed Steel

Hurricane Turning Tools, Woodturning Three Piece Skew Chisel Set, 1/2″ Skew Chisel, 1″ Skew Chisel, 1 1/2″ Skew Chisel, High Speed Steel

Hurricane Turning Tools, Woodturning Three Piece Skew Chisel Set, 1/2″ Skew Chisel, 1″ Skew Chisel, 1 1/2″ Skew Chisel, High Speed Steel - Compare these tools to others that sell for two to three times the price. Ships ready to be sharpened. They are made out of high speed steel for superior edge holding ability and will last 8x longer between sharpenings as compared to carbon steel. This set consists of three separate woodturning skew chisels made from high speed steel. In addition to the high quality steel, hurricane turning tools have extra long handles, some as long at 16 inches. These tools compare with any hss tool on the market and are sold throughout the world. The handles are made from solid ash. Hurricane turning tools are made in one of the world’s largest turning tool factories.

 

Crown 270W 12-Inch Skew Chisel

Crown 270W 1/2-Inch Skew Chisel

Crown 270W 1/2-Inch Skew Chisel - Rockwell 62/64. High speed steel. Exceptional quality tools from crown hand tools ltd, sheffield, england. Made with heavy duty brass ferrules. Lasts up to 6 times as long as carbon tools.

 

14 Skew Chisel

1/4″ Skew Chisel

1/4″ Skew Chisel - Overall length of the tools is 4-3/4″. The design of the tool keeps your fingers close to the cutting edge and the half-round palm-grip handle features a flat spot that keeps it from rolling off your bench. Factory sharpened and ready for use. This 1/4″ skew chisel features a hardwood handle with a metal ferrule.

 

Pinnacle Cryogenic Skew Chisel 34

Pinnacle Cryogenic Skew Chisel 3/4″

Pinnacle Cryogenic Skew Chisel 3/4″ - . The cryogenic treatment process uses sub-zero temperatures, down to -300 degrees f, to modify the micro-structure of the steel into a more uniform grain structure that allows you to hone to a fine edge without chipping. Also, your cutting edge is more durable and more resistant to wear. Overall tool lengths range from 17″ to 23″. Whether you are a professional production turner or a hobbyist with limited shop time, these cryogenically treated tools stay sharp two to three times longer than standard m-2 high-speed steel tools so you are turning more and sharpening less manufactured in sheffield exclusively for woodcraft, these cryogenically treated turning tools offer many of the characteristics of powdered metal tools without the cost of powdered metal tools. Each tool is mounted in a european ash handle.

 

Carter Son Toolworks ½ Skew Chisel

Carter & Son Toolworks ½” Skew Chisel

Carter & Son Toolworks ½” Skew Chisel - Unique profile allows for smooth non-binding cutting with ultimate control. Can sharpen easily by grinding on the flat surface. The m2 high speed steel blades outlasts high carbon steel 6-to-1, and will give you years of use. 1/2-inch chisel with 7-inch handle and 5-inch blade. 3/4-inch chisel with 9-inch handle and 6-inch blade.

 

PFEIL Swiss Made 12mm 1 Skew Chisel Double Bevel

PFEIL “Swiss Made” 12mm, #1 Skew Chisel, Double Bevel

PFEIL “Swiss Made” 12mm, #1 Skew Chisel, Double Bevel - This skew-cut profile chisel is a double beveled grind with two rounded heels that allow the rocking motion necessary in controlling depth of cut. Pfeil carving tools and sets are “swiss made”. “swiss made” implies reliability and precision. Pfeil is undoubtedly the finest carving tool on the market, second-to-none in terms of manufacturing quality and durability. .

 

Narex 6 Piece Set Carving Chisels curved skews curved straight curved V Tool and straight skew chisel 894710

Narex 6 Piece Set Carving Chisels curved skews, curved straight, curved V Tool and straight skew chisel 894710

Narex 6 Piece Set Carving Chisels curved skews, curved straight, curved V Tool and straight skew chisel 894710 - Set includes straight skew, curved straight, 2 curves skews, curves v tool and curved gouge. All chisels blades are made from hardened highly allowed cr-mn steel and heat treated to hrc 55. This 6 piece carving set is manufactured by small tool maker in czech republic. Comes in retail packaging. Handles are oiled european beech with ergonomic octagonal cross section.

 

Pinnacle Cryogenic 1 Oval Skew Chisel

Pinnacle Cryogenic 1″ Oval Skew Chisel

Pinnacle Cryogenic 1″ Oval Skew Chisel - Blade length is 6- 1/2″, handle length 10- 1/8″, overall length 16- 3/8″. Each tool is mounted in a european ash wood handle. Manufactured in sheffield exclusively for woodcraft, these cryogenically treated turning tools offer many of the characteristics of powdered metal tools, without the cost. The cryogenic treatment process utilizes sub-zero temperatures, down to -300°f, creating a more uniform grain structure that allows you to hone to a fine edge providing you with a tool that will hold an edge that will last 2-3 times longer that standard tools. Used much like a traditional skew chisel for beading and finish cuts, the rounded sides allow for easy movement across the tool rest.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.