16 Top Spiral Points

 

Spiral Point Tap Plug TiCN 14-20 #ad

Spiral Point Tap, Plug, TiCN, 1/4-20

Spiral Point Tap, Plug, TiCN, 1/4-20 #ad - 255″, ideal for stainless steel, tolerance 2b, ansi standards 300, high-performance hss spiral point taps for use with through holes in difficult materials. Spiral point tap comes with plug type and high performance style, high speed steel-e material with ticn finish, number of flutes 3, size 1/4″, pitch 20, thread nc/unc, pitch diameter limits h5, standard projection, shank diameter 0. .

 

YG-1 T4 Series High Vanadium HSS Spiral Point Combo Tap TiCN Coated Round Shank with Square End Plug Chamfer 516-24 Thread Size H5 Tolerance #ad

YG-1 T4 Series High Vanadium HSS Spiral Point Combo Tap, TiCN Coated, Round Shank with Square End, Plug Chamfer, 5/16″-24 Thread Size, H5 Tolerance

YG-1 T4 Series High Vanadium HSS Spiral Point Combo Tap, TiCN Coated, Round Shank with Square End, Plug Chamfer, 5/16″-24 Thread Size, H5 Tolerance #ad - Straight flute tools allow chips to collect in the flutes as they cut and are well suited for most applications in shallow cuts. Titanium carbonitride coatings are harder and more wear-resistant than tin for improved tool life and faster cutting speeds. High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance. Right-hand cut tools have a cutting action that engages when they are run in a clockwise direction. Round shanks allow use with a wide variety of toolholding systems.

 

North American Tool 20574 HSS 0127 mm Oversize Spiral Point Hand Tap Uncoated Bright Finish Plug Chamfer 16-2 M Thread Type 381 Length #ad

North American Tool 20574 HSS 0.127 mm Oversize Spiral Point Hand Tap, Uncoated Bright Finish, Plug Chamfer, 16-2 M Thread Type, 3.81″ Length

North American Tool 20574 HSS 0.127 mm Oversize Spiral Point Hand Tap, Uncoated Bright Finish, Plug Chamfer, 16-2 M Thread Type, 3.81″ Length #ad - Features greater strength, allows higher tapping speeds and requires less power to drive. Excellent shearing action of the flute make spiral pointed taps ideal for production tapping of through holes. This d11 tap is 0127 mm oversize and made in the usa. As to general physical dimensions, spiral point taps are identical with the standard hand tap. Spiral point taps have the cutting face of the first few threads cut at a predetermined angle relative to the tap’s axis angle to force the evacuation of chips ahead of the cutting action.

 

Kodiak Cutting Tools KCT207722 USA Made Spiral Point Plug Tap 2 Flute 8 Diameter x 32 TPI Ground Threads High Speed Steel 8-32 Size #ad

Kodiak Cutting Tools KCT207722 USA Made Spiral Point Plug Tap, 2 Flute, #8 Diameter x 32 TPI, Ground Threads, High Speed Steel, 8-32 Size

Kodiak Cutting Tools KCT207722 USA Made Spiral Point Plug Tap, 2 Flute, #8 Diameter x 32 TPI, Ground Threads, High Speed Steel, 8-32 Size #ad - 8-32 spiral point tap. . 168″ shank 3/4 thread length 2-1/8″ overall length 2 flute spiral point threading tap.

 

Sandvik Coromant E874516 Corotap 200 Cutting Tap with Spiral Point UNC 516-18 Cool Top #ad

Sandvik Coromant E8745/16 Corotap 200 Cutting Tap with Spiral Point, UNC 5/16-18, Cool Top

Sandvik Coromant E8745/16 Corotap 200 Cutting Tap with Spiral Point, UNC 5/16-18, Cool Top #ad - Corotap 200 unc iso p spiral point 5/16 inch x 18 taps tool style code e874 tap shank ansi with driving square pack of 1. .

 

Spiral Point Tap Plug Bright M8x10 #ad

Spiral Point Tap, Plug, Bright, M8x1.0

Spiral Point Tap, Plug, Bright, M8x1.0 #ad - Spiral point tap, thread direction right hand, tap style plug, size m8, pitch 1. 00 mm, material high speed steel, finish bright, number of flutes 3, overall length 2-23/32″, thread length 34 mm, shank diameter 0. . 238″, thread type metric fine, pitch diameter limits d9, standards ansi.

 

Dormer E005M4 Spiral Point Taps Bright Coating M4 Metric Coarse Full Length 218 Flute Length 02484 Shank Diameter 01680 #ad

Dormer E005M4 Spiral Point Taps, Bright Coating, M4, Metric Coarse, Full Length 2.1/8″, Flute Length 0.2484″, Shank Diameter 0.1680″

Dormer E005M4 Spiral Point Taps, Bright Coating, M4, Metric Coarse, Full Length 2.1/8″, Flute Length 0.2484″, Shank Diameter 0.1680″ #ad - Plug chamfer for easier starting and correct perpendicular alignment. Spiral point pushes chips ahead of tool to reduce clogging. Spiral point and straight flutes for cutting threads in through holes. Powdered-metal steel for performance approaching that of solid carbide tools, with the toughness and shock-resistance of high-speed steel. Gold oxide finish reduces grinding stress within the tool.

 

Kodiak Cutting Tools KTC208195 USA Made Spiral Point Plug Tap 2 Flute 516 Diameter x 18 TPI Ground Threads High Speed Steel 516-18 Size #ad

Kodiak Cutting Tools KTC208195 USA Made Spiral Point Plug Tap, 2 Flute, 5/16″ Diameter x 18 TPI, Ground Threads, High Speed Steel, 5/16-18 Size

Kodiak Cutting Tools KTC208195 USA Made Spiral Point Plug Tap, 2 Flute, 5/16″ Diameter x 18 TPI, Ground Threads, High Speed Steel, 5/16-18 Size #ad - 5/16-18 spiral point tap. 318″ shank 1-1/8 thread length 2-23/32″ overall length 2 flute spiral point threading tap. .

 

Union Butterfield 1534NRUNC High-Speed Steel Spiral Point Tap Uncoated Bright Finish Round Shank With Square End Plug Chamfer H2 Tolerance 3-48 Thread Size #ad

Union Butterfield 1534NR(UNC) High-Speed Steel Spiral Point Tap, Uncoated (Bright) Finish, Round Shank With Square End, Plug Chamfer, H2 Tolerance, #3-48 Thread Size

Union Butterfield 1534NR(UNC) High-Speed Steel Spiral Point Tap, Uncoated (Bright) Finish, Round Shank With Square End, Plug Chamfer, H2 Tolerance, #3-48 Thread Size #ad - Spiral point tap pushes chips ahead of tool to reduce clogging. Spiral point with straight flutes for cutting threads in through holes. Non-relieved design for applications requiring close gauging fits, for manual feed rate applications, or for use on older equipment. Available in unc (unified coarse), unf (unified fine), or uns (unified special) right-hand thread options for different applications. Round shank with square end helps to minimize rotation in the tool holder.

 

GUHRING 9039160063500 Spiral Point Tap Plug Cobalt TiN Coating 3 Flute 14-20 Size #ad

GUHRING 9039160063500 Spiral Point Tap, Plug, Cobalt, TiN Coating, 3 Flute, 1/4″-20 Size

GUHRING 9039160063500 Spiral Point Tap, Plug, Cobalt, TiN Coating, 3 Flute, 1/4″-20 Size #ad - . Using only premium substrate materials such as cobalt, powdered metal cobalt and carbide, guhring taps are designed to last longer and provide high quality thread results.

 

Sandvik Coromant T200-XM100DK-14 C150 CoroTap 200 Cutting Tap with Spiral Point #ad

Sandvik Coromant T200-XM100DK-1/4 C150 CoroTap 200 Cutting Tap with Spiral Point

Sandvik Coromant T200-XM100DK-1/4 C150 CoroTap 200 Cutting Tap with Spiral Point #ad - . Corotap 200 cutting tap with spiral point g 1/4-19 (uncoated) bright taps tool style code t200-xm100dk tap shank din with driving square pack of 1.

 

Dormer E005M83FL Spiral Point Taps M8 Metric Coarse Full Length 22332Flute Length 05939 Shank Diameter 03180 #ad

Dormer E005M83FL Spiral Point Taps, M8, Metric Coarse, Full Length 2.23/32″Flute Length 0.5939″, Shank Diameter 0.3180″

Dormer E005M83FL Spiral Point Taps, M8, Metric Coarse, Full Length 2.23/32″Flute Length 0.5939″, Shank Diameter 0.3180″ #ad - Powdered-metal steel for performance approaching that of solid carbide tools, with the toughness and shock-resistance of high-speed steel. Plug chamfer for easier starting and correct perpendicular alignment. Spiral point pushes chips ahead of tool to reduce clogging. Gold oxide finish reduces grinding stress within the tool. Spiral point and straight flutes for cutting threads in through holes.

 

Kodiak Cutting Tools KCT214476 USA Made High Performance CNC Style Spiral Point Plug Tap ALTIN Coated High Vanadium M4 x 07 Size #ad

Kodiak Cutting Tools KCT214476 USA Made High Performance CNC Style Spiral Point Plug Tap, ALTIN Coated, High Vanadium, M4 x 0.7 Size

Kodiak Cutting Tools KCT214476 USA Made High Performance CNC Style Spiral Point Plug Tap, ALTIN Coated, High Vanadium, M4 x 0.7 Size #ad - M4 x 0. . 168″ shank 2-1/8″ overall length 3 flute altin coating high vanadium threading tap. 7 high performance threading tap.

 

Dormer E02610-24 Spiral Point Taps AlTiCN Coating UNC10 Full Length 238 Flute Length 04303 Shank Diameter 01940 #ad

Dormer E02610-24 Spiral Point Taps, AlTiCN Coating, UNC10, Full Length 2.3/8″, Flute Length 0.4303″, Shank Diameter 0.1940″

Dormer E02610-24 Spiral Point Taps, AlTiCN Coating, UNC10, Full Length 2.3/8″, Flute Length 0.4303″, Shank Diameter 0.1940″ #ad - Black oxide finish improves lubricity, resists corrosion, and helps prevent buildup. Available in unc (unified coarse) and unf (unified fine) right-hand thread options for different applications. Spiral point and straight flutes for cutting threads in through holes. Spiral point pushes chips ahead of tool to reduce clogging. Powdered-metal steel for performance approaching that of solid carbide tools, with the toughness and shock-resistance of high-speed steel.

 

Viking Drill and Tool by Norseman 57580 SP-18TD Type 20-UB Spiral Point Plug Style Magnum Super Premium TapDrill Set #ad

Viking Drill and Tool by Norseman 57580 SP-18TD Type 20-UB Spiral Point Plug Style Magnum Super Premium Tap/Drill Set

Viking Drill and Tool by Norseman 57580 SP-18TD Type 20-UB Spiral Point Plug Style Magnum Super Premium Tap/Drill Set #ad - Set includes tap and corresponding drill bit. Contains #36, 29, 25, 21, 7, f, 5/16, u, 27/64, 6-32, 8-32, 10-24, 10-32, 1/4-20, 5/16-18, 3/8-16, 7/16-14, 1/2-13. Spiral point nc tap & drill set. 18 pc tap and drill set premium high speed steel spiral point, nc. Spiral point gold oxide plug style.

 

Drillco 2100A10 10 Piece High-Speed Steel Spiral Point Tap Set Uncoated Bright Finish #ad

Drillco 2100A10 10 Piece High-Speed Steel Spiral Point Tap Set, Uncoated (Bright) Finish

Drillco 2100A10 10 Piece High-Speed Steel Spiral Point Tap Set, Uncoated (Bright) Finish #ad - Comes with round with square end shank. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Right-hand cut tools have a cutting action that engages when they are run in a clockwise direction. Straight flute tools allow chips to collect in the flutes as they cut and are well suited for most applications in shallow cuts. High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.