17 Top Steel Band Saws for 2019

 

Magnate M925C38R10 Carbon Tool Steel Bandsaw Blade 92-12 Long - 38 Width 10 Raker Tooth #ad

Magnate M92.5C38R10 Carbon Tool Steel Bandsaw Blade, 92-1/2″ Long – 3/8″ Width; 10 Raker Tooth

Magnate M92.5C38R10 Carbon Tool Steel Bandsaw Blade, 92-1/2″ Long – 3/8″ Width; 10 Raker Tooth #ad - 8-1/2 inch, 7′ 8-1/2″ ) bandsaw blades suit the following models jet j-8203k powerline mark 1 shopcraft 28-283f mit 5125 american industrial amt 4113 enco 505-1372 (models 8201, 8203, 8201vs and 8203vs), 199-9013, 199-9011, 199-9001 dayton 3z981 central machinery 32206-ocea, 32208-ocea, 5687-ocea, 2146-3bmf, 00580-ocea nu-mark 14″ united 14″ wilton tradesman 8201, 8203, 8201vs, 8203vs grizzly g0580x g0555x (92-1/2″ to 93-1/2″) 14″ ohio fo. Steel). E. It can cut all types of woods and is especially ideal for soft woods i. Note the owner’s manual of some woodcutting bandsaw may stipulate that it can cut metal, but woodcutting bandsaws can only cut non-ferrous metals, such as aluminum, brass, copper, etc. Carbon tool steel bandsaw blades are made from high end carbon steel. The picture depicted represents one blade the pricing is for one blade/package. Pine, polar, fir and spruce. Trying to cut steel at woodcutting speeds will ruin the blade due to extreme heat produced. Following is a guideline for choosing an adequate tooth pattern to cut metal materials, use 24 raker to cut 1/16″ to 1/4″ thick material, 18 raker to cut 1/8″ to 3/8″ thick material, 14 raker to cut 3/16″ to 7/16″ thick material, 10 raker to cut 1/4″ to 5/8″ thick material, 6 hook to cut 3/8″ to 2″ thick material, 4 hook to cut 3/4″ to 4-1/2″ thick material, 3 hook to cut 1″ to 6″ thick material, 2 hook to cut 2″ to 12″ thick material, there may be a number of other bandsaws or models that use the same blade lengths as the ones listed 92-1/2 inch ( 7 ft. E. It is also used for cutting plastics, aluminum, metals, and mild steel. Cutting steel could damage your saw, due to the fact that blade speed on most woodcutting bandsaws (average 800 to 3500 fpm) is not slow enough (40 to 200 fpm) for cutting ferrous metals (i. Cutting mild steel at speeds under 200 fpm (feet per minute) with liquid coolant running along the back of the blade yields the best results.

 

Magnate M57C14R18 Carbon Tool Steel Bandsaw Blade 57 Long - 14 Width 18 Raker Tooth #ad

Magnate M57C14R18 Carbon Tool Steel Bandsaw Blade, 57″ Long – 1/4″ Width; 18 Raker Tooth

Magnate M57C14R18 Carbon Tool Steel Bandsaw Blade, 57″ Long – 1/4″ Width; 18 Raker Tooth #ad - Pine, polar, fir and spruce. The picture depicted represents one blade the pricing is for one blade/package. E. 2, if the owner’s manual is not available, refer to previous invoices. Cutting steel could damage your saw, due to the fact that blade speed on most woodcutting bandsaws (average 800 to 3500 fpm) is not slow enough (40 to 200 fpm) for cutting ferrous metals (i. This method will provide the most possible ac. Following is a guideline for choosing an adequate tooth pattern to cut metal materials, use 24 raker to cut 1/16″ to 1/4″ thick material, 18 raker to cut 1/8″ to 3/8″ thick material, 14 raker to cut 3/16″ to 7/16″ thick material, 10 raker to cut 1/4″ to 5/8″ thick material, 6 hook to cut 3/8″ to 2″ thick material, 4 hook to cut 3/4″ to 4-1/2″ thick material, 3 hook to cut 1″ to 6″ thick material, 2 hook to cut 2″ to 12″ thick material, 57 inch ( 4 ft. Steel). Cutting mild steel at speeds under 200 fpm (feet per minute) with liquid coolant running along the back of the blade yields the best results. It is also used for cutting plastics, aluminum, metals, and mild steel. Carbon tool steel bandsaw blades are made from high end carbon steel. 9 inch, 4′ 9″ ) bandsaw blades suit the following models central machinery d4473-obmb black & decker 12″ duracraft bbs4i2, v5312 shopcraft t676020 nuway 12″ if in doubt, to determine bandsaw blade length 1, check the owner’s manual of your bandsaw machine for specifications, not only the length, but also the range of the width and thickness. E. Note the owner’s manual of some woodcutting bandsaw may stipulate that it can cut metal, but woodcutting bandsaws can only cut non-ferrous metals, such as aluminum, brass, copper, etc. Trying to cut steel at woodcutting speeds will ruin the blade due to extreme heat produced. 3, cut your old bandsaw blade so that it lies flat on a level surface, and measure its length. It can cut all types of woods and is especially ideal for soft woods i.

 

Magnate M895C14H6 Carbon Tool Steel Bandsaw Blade 89-12 Long - 14 Width 6 Hook Tooth #ad

Magnate M89.5C14H6 Carbon Tool Steel Bandsaw Blade, 89-1/2″ Long – 1/4″ Width; 6 Hook Tooth

Magnate M89.5C14H6 Carbon Tool Steel Bandsaw Blade, 89-1/2″ Long – 1/4″ Width; 6 Hook Tooth #ad - Steel). E. It is also used for cutting plastics, aluminum, metals, and mild steel. The picture depicted represents one blade the pricing is for one blade/package. This method wi. Following is a guideline for choosing an adequate tooth pattern to cut metal materials, use 24 raker to cut 1/16″ to 1/4″ thick material, 18 raker to cut 1/8″ to 3/8″ thick material, 14 raker to cut 3/16″ to 7/16″ thick material, 10 raker to cut 1/4″ to 5/8″ thick material, 6 hook to cut 3/8″ to 2″ thick material, 4 hook to cut 3/4″ to 4-1/2″ thick material, 3 hook to cut 1″ to 6″ thick material, 2 hook to cut 2″ to 12″ thick material, there may be a number of other bandsaws or models that use the same blade lengths as the ones listed 89-1/2 inch ( 7 ft. 2, if the owner’s manual is not available, refer to previous invoices. Carbon tool steel bandsaw blades are made from high end carbon steel. Note the owner’s manual of some woodcutting bandsaw may stipulate that it can cut metal, but woodcutting bandsaws can only cut non-ferrous metals, such as aluminum, brass, copper, etc. 3, cut your old bandsaw blade so that it lies flat on a level surface, and measure its length. Trying to cut steel at woodcutting speeds will ruin the blade due to extreme heat produced. E. Cutting steel could damage your saw, due to the fact that blade speed on most woodcutting bandsaws (average 800 to 3500 fpm) is not slow enough (40 to 200 fpm) for cutting ferrous metals (i. Pine, polar, fir and spruce. 5-1/2 inch, 7′ 5-1/2″ ) bandsaw blades suit the following models sears craftsman 12″ if in doubt, to determine bandsaw blade length 1, check the owner’s manual of your bandsaw machine for specifications, not only the length, but also the range of the width and thickness. It can cut all types of woods and is especially ideal for soft woods i. Cutting mild steel at speeds under 200 fpm (feet per minute) with liquid coolant running along the back of the blade yields the best results.

 

Magnate M705C14R24 Carbon Tool Steel Bandsaw Blade 70-12 Long - 14 Width 24 Raker Tooth #ad

Magnate M70.5C14R24 Carbon Tool Steel Bandsaw Blade, 70-1/2″ Long – 1/4″ Width; 24 Raker Tooth

Magnate M70.5C14R24 Carbon Tool Steel Bandsaw Blade, 70-1/2″ Long – 1/4″ Width; 24 Raker Tooth #ad - Following is a guideline for choosing an adequate tooth pattern to cut metal materials, use 24 raker to cut 1/16″ to 1/4″ thick material, 18 raker to cut 1/8″ to 3/8″ thick material, 14 raker to cut 3/16″ to 7/16″ thick material, 10 raker to cut 1/4″ to 5/8″ thick material, 6 hook to cut 3/8″ to 2″ thick material, 4 hook to cut 3/4″ to 4-1/2″ thick material, 3 hook to cut 1″ to 6″ thick material, 2 hook to cut 2″ to 12″ thick material, there may be a number of other bandsaws or models that use the same blade lengths as the ones listed 70-1/2 inch ( 5 ft. Steel). Trying to cut steel at woodcutting speeds will ruin the blade due to extreme heat produced. It is also used for cutting plastics, aluminum, metals, and mild steel. 2, if the owner’s manual is not available, refer to previous invoices. E. 3, cut your old bandsaw blade so that it lies flat on a level sur. It can cut all types of woods and is especially ideal for soft woods i. The picture depicted represents one blade the pricing is for one blade/package. Cutting mild steel at speeds under 200 fpm (feet per minute) with liquid coolant running along the back of the blade yields the best results. Cutting steel could damage your saw, due to the fact that blade speed on most woodcutting bandsaws (average 800 to 3500 fpm) is not slow enough (40 to 200 fpm) for cutting ferrous metals (i. 10-1/2 inch, 5′ 10-1/2″ ) bandsaw blades suit the following models craftsman 10″ 921400 atlas workshop 9360 rikon 10-305 if in doubt, to determine bandsaw blade length 1, check the owner’s manual of your bandsaw machine for specifications, not only the length, but also the range of the width and thickness. Pine, polar, fir and spruce. E. Note the owner’s manual of some woodcutting bandsaw may stipulate that it can cut metal, but woodcutting bandsaws can only cut non-ferrous metals, such as aluminum, brass, copper, etc. Carbon tool steel bandsaw blades are made from high end carbon steel.

 

Magnate M62C12R14 Carbon Tool Steel Bandsaw Blade 62 Long - 12 Width 14 Raker Tooth #ad

Magnate M62C12R14 Carbon Tool Steel Bandsaw Blade, 62″ Long – 1/2″ Width; 14 Raker Tooth

Magnate M62C12R14 Carbon Tool Steel Bandsaw Blade, 62″ Long – 1/2″ Width; 14 Raker Tooth #ad - Note the owner’s manual of some woodcutting bandsaw may stipulate that it can cut metal, but woodcutting bandsaws can only cut non-ferrous metals, such as aluminum, brass, copper, etc. Following is a guideline for choosing an adequate tooth pattern to cut metal materials, use 24 raker to cut 1/16″ to 1/4″ thick material, 18 raker to cut 1/8″ to 3/8″ thick material, 14 raker to cut 3/16″ to 7/16″ thick material, 10 raker to cut 1/4″ to 5/8″ thick material, 6 hook to cut 3/8″ to 2″ thick material, 4 hook to cut 3/4″ to 4-1/2″ thick material, 3 hook to cut 1″ to 6″ thick material, 2 hook to cut 2″ to 12″ thick material, there may be a number of other bandsaws or models that use the same blade lengths as the ones listed 62 inch ( 5 ft. E. Carbon tool steel bandsaw blades are made from high end carbon steel. Cutting steel could damage your saw, due to the fact that blade speed on most woodcutting bandsaws (average 800 to 3500 fpm) is not slow enough (40 to 200 fpm) for cutting ferrous metals (i. The picture depicted represents one blade the pricing is for one blade/package. E. It can cut all types of woods and is especially ideal for soft woods i. 2 inch, 5′ 2″ ) bandsaw blades suit the following models skil 3104 sears craftsman 103-24556, 2442 9ht2442n central machinery d0686-4bmf, 01629-icea mark 1 rexon bs-12 alltrade 1996bbr powerline dbs-12 jet dbs-12 black & decker (some models) grizzly g8976 12″ walker-turner 10″ if in doubt, to determine bandsaw blade length 1, check the owner’s manual of your bandsaw machine for specifications, not only the length, but also the range of the. Cutting mild steel at speeds under 200 fpm (feet per minute) with liquid coolant running along the back of the blade yields the best results. It is also used for cutting plastics, aluminum, metals, and mild steel. Trying to cut steel at woodcutting speeds will ruin the blade due to extreme heat produced. Pine, polar, fir and spruce. Steel).

 

Magnate M67C14R14 Carbon Tool Steel Bandsaw Blade 67 Long - 14 Width 14 Raker Tooth #ad

Magnate M67C14R14 Carbon Tool Steel Bandsaw Blade, 67″ Long – 1/4″ Width; 14 Raker Tooth

Magnate M67C14R14 Carbon Tool Steel Bandsaw Blade, 67″ Long – 1/4″ Width; 14 Raker Tooth #ad - This method w. E. Note the owner’s manual of some woodcutting bandsaw may stipulate that it can cut metal, but woodcutting bandsaws can only cut non-ferrous metals, such as aluminum, brass, copper, etc. Cutting steel could damage your saw, due to the fact that blade speed on most woodcutting bandsaws (average 800 to 3500 fpm) is not slow enough (40 to 200 fpm) for cutting ferrous metals (i. Following is a guideline for choosing an adequate tooth pattern to cut metal materials, use 24 raker to cut 1/16″ to 1/4″ thick material, 18 raker to cut 1/8″ to 3/8″ thick material, 14 raker to cut 3/16″ to 7/16″ thick material, 10 raker to cut 1/4″ to 5/8″ thick material, 6 hook to cut 3/8″ to 2″ thick material, 4 hook to cut 3/4″ to 4-1/2″ thick material, 3 hook to cut 1″ to 6″ thick material, 2 hook to cut 2″ to 12″ thick material, there may be a number of other bandsaws or models that use the same blade lengths as the ones listed 67 inch ( 5 ft. Trying to cut steel at woodcutting speeds will ruin the blade due to extreme heat produced. 2, if the owner’s manual is not available, refer to previous invoices. It can cut all types of woods and is especially ideal for soft woods i. 7 inch, 5′ 7″ ) bandsaw blades suit the following models ryobi bs1001svtradesman 8168 if in doubt, to determine bandsaw blade length 1, check the owner’s manual of your bandsaw machine for specifications, not only the length, but also the range of the width and thickness. Cutting mild steel at speeds under 200 fpm (feet per minute) with liquid coolant running along the back of the blade yields the best results. Carbon tool steel bandsaw blades are made from high end carbon steel. E. Steel). 3, cut your old bandsaw blade so that it lies flat on a level surface, and measure its length. Pine, polar, fir and spruce. It is also used for cutting plastics, aluminum, metals, and mild steel. The picture depicted represents one blade the pricing is for one blade/package.

 

Magnate M80C12R14 Carbon Tool Steel Bandsaw Blade 80 Long - 12 Width 14 Raker Tooth #ad

Magnate M80C12R14 Carbon Tool Steel Bandsaw Blade, 80″ Long – 1/2″ Width; 14 Raker Tooth

Magnate M80C12R14 Carbon Tool Steel Bandsaw Blade, 80″ Long – 1/2″ Width; 14 Raker Tooth #ad - E. Steel). 2, if the owner’s manual is not available, refer to previous invoices. Cutting steel could damage your saw, due to the fact that blade speed on most woodcutting bandsaws (average 800 to 3500 fpm) is not slow enough (40 to 200 fpm) for cutting ferrous metals (i. Following is a guideline for choosing an adequate tooth pattern to cut metal materials, use 24 raker to cut 1/16″ to 1/4″ thick material, 18 raker to cut 1/8″ to 3/8″ thick material, 14 raker to cut 3/16″ to 7/16″ thick material, 10 raker to cut 1/4″ to 5/8″ thick material, 6 hook to cut 3/8″ to 2″ thick material, 4 hook to cut 3/4″ to 4-1/2″ thick material, 3 hook to cut 1″ to 6″ thick material, 2 hook to cut 2″ to 12″ thick material, there may be a number of other bandsaws or models that use the same blade lengths as the ones listed 80 inch ( 6 ft. 8 inch, 6′ 8″ ) bandsaw blades suit the following models sears craftsman 9ht2433n, 9ht2331n, 2428, 24331n, 24393n industrial 12″, 113 angle head atlas general international 90-060 m1 (woodworking) if in doubt, to determine bandsaw blade length 1, check the owner’s manual of your bandsaw machine for specifications, not only the length, but also the range of the width and thickness. Cutting mild steel at speeds under 200 fpm (feet per minute) with liquid coolant running along the back of the blade yields the best results. The picture depicted represents one blade the pricing is for one blade/package. E. Trying to cut steel at woodcutting speeds will ruin the blade due to extreme heat produced. Carbon tool steel bandsaw blades are made from high end carbon steel. It is also used for cutting plastics, aluminum, metals, and mild steel. It can cut all types of woods and is especially ideal for soft woods i. Pine, polar, fir and spruce. Note the owner’s manual of some woodcutting bandsaw may stipulate that it can cut metal, but woodcutting bandsaws can only cut non-ferrous metals, such as aluminum, brass, copper, etc.

 

Magnate M705C38R18 Carbon Tool Steel Bandsaw Blade 70-12 Long - 38 Width 18 Raker Tooth #ad

Magnate M70.5C38R18 Carbon Tool Steel Bandsaw Blade, 70-1/2″ Long – 3/8″ Width; 18 Raker Tooth

Magnate M70.5C38R18 Carbon Tool Steel Bandsaw Blade, 70-1/2″ Long – 3/8″ Width; 18 Raker Tooth #ad - For wood or metal cutting 1/2″ width 6 hook tooth 0025″ thickness 0049″ kerf. Replacement blade for hitachi cb75f 14-1/2inch resaw band saw. Replacement blade for hitachi model cb75f 14-1/2-inch resaw band saw. For wood or metal cutting 1/4″ width 18 raker tooth 0025″ thickness 0047″ kerf. Blade has 4-teeth per inch. For wood or metal cutting 1/4″ width 24 raker tooth 0025″ thickness. For wood or metal cutting 3/8″ width 18 raker tooth 0025″ thickness 0049″ kerf. Comes with a 30-day limited warranty.

 

Magnate M725C12H6 Carbon Tool Steel Bandsaw Blade 72-12 Long - 12 Width 6 Hook Tooth #ad

Magnate M72.5C12H6 Carbon Tool Steel Bandsaw Blade, 72-1/2″ Long – 1/2″ Width; 6 Hook Tooth

Magnate M72.5C12H6 Carbon Tool Steel Bandsaw Blade, 72-1/2″ Long – 1/2″ Width; 6 Hook Tooth #ad - E. The picture depicted represents one blade the pricing is for one blade/package. 2, if the owner’s manual is not available, refer to previous invoices. It can cut all types of woods and is especially ideal for soft woods i. Cutting mild steel at speeds under 200 fpm (feet per minute) with liquid coolant running along the back of the blade yields the best results. Steel). Trying to cut steel at woodcutting speeds will ruin the blade due to extreme heat produced. It is also used for cutting plastics, aluminum, metals, and mild steel. E. Pine, polar, fir and spruce. 3, cut your old bandsaw blade so that it lies flat on a level surface,. Following is a guideline for choosing an adequate tooth pattern to cut metal materials, use 24 raker to cut 1/16″ to 1/4″ thick material, 18 raker to cut 1/8″ to 3/8″ thick material, 14 raker to cut 3/16″ to 7/16″ thick material, 10 raker to cut 1/4″ to 5/8″ thick material, 6 hook to cut 3/8″ to 2″ thick material, 4 hook to cut 3/4″ to 4-1/2″ thick material, 3 hook to cut 1″ to 6″ thick material, 2 hook to cut 2″ to 12″ thick material, there may be a number of other bandsaws or models that use the same blade lengths as the ones listed 72-1/2 inch ( 6 ft. Cutting steel could damage your saw, due to the fact that blade speed on most woodcutting bandsaws (average 800 to 3500 fpm) is not slow enough (40 to 200 fpm) for cutting ferrous metals (i. Carbon tool steel bandsaw blades are made from high end carbon steel. 1/2 inch, 6′ 1/2″ ) bandsaw blades suit the following models delta 28-195, bs150ls skil hd 3640 ryobi bs50n dremel 1120 if in doubt, to determine bandsaw blade length 1, check the owner’s manual of your bandsaw machine for specifications, not only the length, but also the range of the width and thickness. Note the owner’s manual of some woodcutting bandsaw may stipulate that it can cut metal, but woodcutting bandsaws can only cut non-ferrous metals, such as aluminum, brass, copper, etc.

 

Magnate M705C18R18 Carbon Tool Steel Bandsaw Blade 70-12 Long - 18 Width 18 Raker Tooth #ad

Magnate M70.5C18R18 Carbon Tool Steel Bandsaw Blade, 70-1/2″ Long – 1/8″ Width; 18 Raker Tooth

Magnate M70.5C18R18 Carbon Tool Steel Bandsaw Blade, 70-1/2″ Long – 1/8″ Width; 18 Raker Tooth #ad - 2, if the owner’s manual is not available, refer to previous invoices. Note the owner’s manual of some woodcutting bandsaw may stipulate that it can cut metal, but woodcutting bandsaws can only cut non-ferrous metals, such as aluminum, brass, copper, etc. Carbon tool steel bandsaw blades are made from high end carbon steel. It can cut all types of woods and is especially ideal for soft woods i. Cutting mild steel at speeds under 200 fpm (feet per minute) with liquid coolant running along the back of the blade yields the best results. Trying to cut steel at woodcutting speeds will ruin the blade due to extreme heat produced. Steel). E. 3, cut your old bandsaw blade so that it lies flat on a level sur. The picture depicted represents one blade the pricing is for one blade/package. Pine, polar, fir and spruce. Following is a guideline for choosing an adequate tooth pattern to cut metal materials, use 24 raker to cut 1/16″ to 1/4″ thick material, 18 raker to cut 1/8″ to 3/8″ thick material, 14 raker to cut 3/16″ to 7/16″ thick material, 10 raker to cut 1/4″ to 5/8″ thick material, 6 hook to cut 3/8″ to 2″ thick material, 4 hook to cut 3/4″ to 4-1/2″ thick material, 3 hook to cut 1″ to 6″ thick material, 2 hook to cut 2″ to 12″ thick material, there may be a number of other bandsaws or models that use the same blade lengths as the ones listed 70-1/2 inch ( 5 ft. It is also used for cutting plastics, aluminum, metals, and mild steel. 10-1/2 inch, 5′ 10-1/2″ ) bandsaw blades suit the following models craftsman 10″ 921400 atlas workshop 9360, 912 rikon 10-305 if in doubt, to determine bandsaw blade length 1, check the owner’s manual of your bandsaw machine for specifications, not only the length, but also the range of the width and thickness. Cutting steel could damage your saw, due to the fact that blade speed on most woodcutting bandsaws (average 800 to 3500 fpm) is not slow enough (40 to 200 fpm) for cutting ferrous metals (i. E.

 

Magnate M72C14R10 Carbon Tool Steel Bandsaw Blade 72 Long - 14 Width 10 Raker Tooth #ad

Magnate M72C14R10 Carbon Tool Steel Bandsaw Blade, 72″ Long – 1/4″ Width; 10 Raker Tooth

Magnate M72C14R10 Carbon Tool Steel Bandsaw Blade, 72″ Long – 1/4″ Width; 10 Raker Tooth #ad - E. , 6′ ) bandsaw blades suit the following models shopsmith 10 if in doubt, to determine bandsaw blade length 1, check the owner’s manual of your bandsaw machine for specifications, not only the length, but also the range of the width and thickness. This method will provide the most possible. Steel). 3, cut your old bandsaw blade so that it lies flat on a level surface, and measure its length. It is also used for cutting plastics, aluminum, metals, and mild steel. Carbon tool steel bandsaw blades are made from high end carbon steel. Cutting steel could damage your saw, due to the fact that blade speed on most woodcutting bandsaws (average 800 to 3500 fpm) is not slow enough (40 to 200 fpm) for cutting ferrous metals (i. E. It can cut all types of woods and is especially ideal for soft woods i. The picture depicted represents one blade the pricing is for one blade/package. Pine, polar, fir and spruce. Trying to cut steel at woodcutting speeds will ruin the blade due to extreme heat produced. Following is a guideline for choosing an adequate tooth pattern to cut metal materials, use 24 raker to cut 1/16″ to 1/4″ thick material, 18 raker to cut 1/8″ to 3/8″ thick material, 14 raker to cut 3/16″ to 7/16″ thick material, 10 raker to cut 1/4″ to 5/8″ thick material, 6 hook to cut 3/8″ to 2″ thick material, 4 hook to cut 3/4″ to 4-1/2″ thick material, 3 hook to cut 1″ to 6″ thick material, 2 hook to cut 2″ to 12″ thick material, there may be a number of other bandsaws or models that use the same blade lengths as the ones listed 72 inch ( 6 ft. 2, if the owner’s manual is not available, refer to previous invoices. Cutting mild steel at speeds under 200 fpm (feet per minute) with liquid coolant running along the back of the blade yields the best results. Note the owner’s manual of some woodcutting bandsaw may stipulate that it can cut metal, but woodcutting bandsaws can only cut non-ferrous metals, such as aluminum, brass, copper, etc.

 

Magnate M705C12R24 Carbon Tool Steel Bandsaw Blade 70-12 Long - 12 Width 24 Raker Tooth #ad

Magnate M70.5C12R24 Carbon Tool Steel Bandsaw Blade, 70-1/2″ Long – 1/2″ Width; 24 Raker Tooth

Magnate M70.5C12R24 Carbon Tool Steel Bandsaw Blade, 70-1/2″ Long – 1/2″ Width; 24 Raker Tooth #ad - Trying to cut steel at woodcutting speeds will ruin the blade due to extreme heat produced. Cutting mild steel at speeds under 200 fpm (feet per minute) with liquid coolant running along the back of the blade yields the best results. 2, if the owner’s manual is not available, refer to previous invoices. E. It can cut all types of woods and is especially ideal for soft woods i. Following is a guideline for choosing an adequate tooth pattern to cut metal materials, use 24 raker to cut 1/16″ to 1/4″ thick material, 18 raker to cut 1/8″ to 3/8″ thick material, 14 raker to cut 3/16″ to 7/16″ thick material, 10 raker to cut 1/4″ to 5/8″ thick material, 6 hook to cut 3/8″ to 2″ thick material, 4 hook to cut 3/4″ to 4-1/2″ thick material, 3 hook to cut 1″ to 6″ thick material, 2 hook to cut 2″ to 12″ thick material, there may be a number of other bandsaws or models that use the same blade lengths as the ones listed 70-1/2 inch ( 5 ft. Steel). E. Cutting steel could damage your saw, due to the fact that blade speed on most woodcutting bandsaws (average 800 to 3500 fpm) is not slow enough (40 to 200 fpm) for cutting ferrous metals (i. It is also used for cutting plastics, aluminum, metals, and mild steel. Carbon tool steel bandsaw blades are made from high end carbon steel. 10-1/2 inch, 5′ 10-1/2″ ) bandsaw blades suit the following models craftsman 10″ 921400 atlas workshop 9360, 912 rikon 10-305 if in doubt, to determine bandsaw blade length 1, check the owner’s manual of your bandsaw machine for specifications, not only the length, but also the range of the width and thickness. 3, cut your old bandsaw blade so that it lies flat on a level sur. Pine, polar, fir and spruce. Note the owner’s manual of some woodcutting bandsaw may stipulate that it can cut metal, but woodcutting bandsaws can only cut non-ferrous metals, such as aluminum, brass, copper, etc. The picture depicted represents one blade the pricing is for one blade/package.

 

Magnate M92C14R10 Carbon Tool Steel Bandsaw Blade 92 Long - 14 Width 10 Raker Tooth #ad

Magnate M92C14R10 Carbon Tool Steel Bandsaw Blade, 92″ Long – 1/4″ Width; 10 Raker Tooth

Magnate M92C14R10 Carbon Tool Steel Bandsaw Blade, 92″ Long – 1/4″ Width; 10 Raker Tooth #ad - Cutting mild steel at speeds under 200 fpm (feet per minute) with liquid coolant running along the back of the blade yields the best results. 8 inch, 7′ 8″ ) bandsaw blades suit the following models enco 199-9001 if in doubt, to determine bandsaw blade length 1, check the owner’s manual of your bandsaw machine for specifications, not only the length, but also the range of the width and thickness. Following is a guideline for choosing an adequate tooth pattern to cut metal materials, use 24 raker to cut 1/16″ to 1/4″ thick material, 18 raker to cut 1/8″ to 3/8″ thick material, 14 raker to cut 3/16″ to 7/16″ thick material, 10 raker to cut 1/4″ to 5/8″ thick material, 6 hook to cut 3/8″ to 2″ thick material, 4 hook to cut 3/4″ to 4-1/2″ thick material, 3 hook to cut 1″ to 6″ thick material, 2 hook to cut 2″ to 12″ thick material, there may be a number of other bandsaws or models that use the same blade lengths as the ones listed 92 inch ( 7 ft. Carbon tool steel bandsaw blades are made from high end carbon steel. The picture depicted represents one blade the pricing is for one blade/package. Pine, polar, fir and spruce. E. Trying to cut steel at woodcutting speeds will ruin the blade due to extreme heat produced. 3, cut your old bandsaw blade so that it lies flat on a level surface, and measure its length. It is also used for cutting plastics, aluminum, metals, and mild steel. Cutting steel could damage your saw, due to the fact that blade speed on most woodcutting bandsaws (average 800 to 3500 fpm) is not slow enough (40 to 200 fpm) for cutting ferrous metals (i. This method will provide the mos. It can cut all types of woods and is especially ideal for soft woods i. E. Steel). Note the owner’s manual of some woodcutting bandsaw may stipulate that it can cut metal, but woodcutting bandsaws can only cut non-ferrous metals, such as aluminum, brass, copper, etc. 2, if the owner’s manual is not available, refer to previous invoices.

 

Magnate M9975C14H6 Carbon Tool Steel Bandsaw Blade 99-34 Long - 14 Width 6 Hook Tooth #ad

Magnate M99.75C14H6 Carbon Tool Steel Bandsaw Blade, 99-3/4″ Long – 1/4″ Width; 6 Hook Tooth

Magnate M99.75C14H6 Carbon Tool Steel Bandsaw Blade, 99-3/4″ Long – 1/4″ Width; 6 Hook Tooth #ad - The picture depicted represents one blade the pricing is for one blade/package. Cutting mild steel at speeds under 200 fpm (feet per minute) with liquid coolant running along the back of the blade yields the best results. 2, if the owner’s manual is not available, refer to previous invoices. Cutting steel could damage your saw, due to the fact that blade speed on most woodcutting bandsaws (average 800 to 3500 fpm) is not slow enough (40 to 200 fpm) for cutting ferrous metals (i. It is also used for cutting plastics, aluminum, metals, and mild steel. Carbon tool steel bandsaw blades are made from high end carbon steel. Steel). E. Pine, polar, fir and spruce. 3-3/4 inch, 8′ 3-3/4″ ) bandsaw blades suit the following models craftsman professional 14 general international 90-100 m1 if in doubt, to determine bandsaw blade length 1, check the owner’s manual of your bandsaw machine for specifications, not only the length, but also the range of the width and thickness. Following is a guideline for choosing an adequate tooth pattern to cut metal materials, use 24 raker to cut 1/16″ to 1/4″ thick material, 18 raker to cut 1/8″ to 3/8″ thick material, 14 raker to cut 3/16″ to 7/16″ thick material, 10 raker to cut 1/4″ to 5/8″ thick material, 6 hook to cut 3/8″ to 2″ thick material, 4 hook to cut 3/4″ to 4-1/2″ thick material, 3 hook to cut 1″ to 6″ thick material, 2 hook to cut 2″ to 12″ thick material, there may be a number of other bandsaws or models that use the same blade lengths as the ones listed 99-3/4 inch ( 8 ft. Note the owner’s manual of some woodcutting bandsaw may stipulate that it can cut metal, but woodcutting bandsaws can only cut non-ferrous metals, such as aluminum, brass, copper, etc. Trying to cut steel at woodcutting speeds will ruin the blade due to extreme heat produced. 3, cut your old bandsaw blade so that it lies flat on a level surf. E. It can cut all types of woods and is especially ideal for soft woods i.

 

Magnate M725C14H6 Carbon Tool Steel Bandsaw Blade 72-12 Long - 14 Width 6 Hook Tooth #ad

Magnate M72.5C14H6 Carbon Tool Steel Bandsaw Blade, 72-1/2″ Long – 1/4″ Width; 6 Hook Tooth

Magnate M72.5C14H6 Carbon Tool Steel Bandsaw Blade, 72-1/2″ Long – 1/4″ Width; 6 Hook Tooth #ad - It can cut all types of woods and is especially ideal for soft woods i. E. Pine, polar, fir and spruce. The picture depicted represents one blade the pricing is for one blade/package. Note the owner’s manual of some woodcutting bandsaw may stipulate that it can cut metal, but woodcutting bandsaws can only cut non-ferrous metals, such as aluminum, brass, copper, etc. 3, cut your old bandsaw blade so that it lies flat on a level surface,. Steel). Cutting mild steel at speeds under 200 fpm (feet per minute) with liquid coolant running along the back of the blade yields the best results. 2, if the owner’s manual is not available, refer to previous invoices. Carbon tool steel bandsaw blades are made from high end carbon steel. Following is a guideline for choosing an adequate tooth pattern to cut metal materials, use 24 raker to cut 1/16″ to 1/4″ thick material, 18 raker to cut 1/8″ to 3/8″ thick material, 14 raker to cut 3/16″ to 7/16″ thick material, 10 raker to cut 1/4″ to 5/8″ thick material, 6 hook to cut 3/8″ to 2″ thick material, 4 hook to cut 3/4″ to 4-1/2″ thick material, 3 hook to cut 1″ to 6″ thick material, 2 hook to cut 2″ to 12″ thick material, there may be a number of other bandsaws or models that use the same blade lengths as the ones listed 72-1/2 inch ( 6 ft. It is also used for cutting plastics, aluminum, metals, and mild steel. Trying to cut steel at woodcutting speeds will ruin the blade due to extreme heat produced. Cutting steel could damage your saw, due to the fact that blade speed on most woodcutting bandsaws (average 800 to 3500 fpm) is not slow enough (40 to 200 fpm) for cutting ferrous metals (i. 1/2 inch, 6′ 1/2″ ) bandsaw blades suit the following models delta 28-195, bs150ls skil hd 3640 ryobi bs50n dremel 1120 if in doubt, to determine bandsaw blade length 1, check the owner’s manual of your bandsaw machine for specifications, not only the length, but also the range of the width and thickness. E.

 

Magnate M80C38R24 Carbon Tool Steel Bandsaw Blade 80 Long - 38 Width 24 Raker Tooth #ad

Magnate M80C38R24 Carbon Tool Steel Bandsaw Blade, 80″ Long – 3/8″ Width; 24 Raker Tooth

Magnate M80C38R24 Carbon Tool Steel Bandsaw Blade, 80″ Long – 3/8″ Width; 24 Raker Tooth #ad - Steel). Pine, polar, fir and spruce. E. The picture depicted represents one blade the pricing is for one blade/package. Carbon tool steel bandsaw blades are made from high end carbon steel. Following is a guideline for choosing an adequate tooth pattern to cut metal materials, use 24 raker to cut 1/16″ to 1/4″ thick material, 18 raker to cut 1/8″ to 3/8″ thick material, 14 raker to cut 3/16″ to 7/16″ thick material, 10 raker to cut 1/4″ to 5/8″ thick material, 6 hook to cut 3/8″ to 2″ thick material, 4 hook to cut 3/4″ to 4-1/2″ thick material, 3 hook to cut 1″ to 6″ thick material, 2 hook to cut 2″ to 12″ thick material, there may be a number of other bandsaws or models that use the same blade lengths as the ones listed 80 inch ( 6 ft. E. Trying to cut steel at woodcutting speeds will ruin the blade due to extreme heat produced. Note the owner’s manual of some woodcutting bandsaw may stipulate that it can cut metal, but woodcutting bandsaws can only cut non-ferrous metals, such as aluminum, brass, copper, etc. Cutting steel could damage your saw, due to the fact that blade speed on most woodcutting bandsaws (average 800 to 3500 fpm) is not slow enough (40 to 200 fpm) for cutting ferrous metals (i. It is also used for cutting plastics, aluminum, metals, and mild steel. 8 inch, 6′ 8″ ) bandsaw blades suit the following models sears craftsman 9ht2433n, 9ht2331n, 2428, 24331n, 24393n industrial 12″, 113 angle head atlas general international 90-060 m1 (woodworking) if in doubt, to determine bandsaw blade length 1, check the owner’s manual of your bandsaw machine for specifications, not only the length, but also the range of the width and thickness. 2, if the owner’s manual is not available, refer to previous invoices. Cutting mild steel at speeds under 200 fpm (feet per minute) with liquid coolant running along the back of the blade yields the best results. It can cut all types of woods and is especially ideal for soft woods i.

 

Hitachi 967992 14-Inch Steel Band Saw Blade with Swaged Tip #ad

Hitachi 967992 1/4-Inch Steel Band Saw Blade with Swaged Tip

Hitachi 967992 1/4-Inch Steel Band Saw Blade with Swaged Tip #ad - Blade has 4-teeth per inch. Designed to deliver straight, accurate cuts across a broad range of materials. Replacement blade for hitachi model cb75f 14-1/2-inch resaw band saw. This blade has 4 teeth per inch. Replacement blade for hitachi cb75f 14-1/2inch resaw band saw. Cones with a 30-day limited warranty. Provides long tooth life and exceptional durability. Comes with a 30-day limited warranty.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.