18 Best Thread Cutting Screws in 2020

 

Steel Thread Cutting Screw Black Oxide Finish 82 Degree Flat Undercut Head Phillips Drive Type F 10-32 Thread Size 38 Length Pack of 100 #ad

Steel Thread Cutting Screw, Black Oxide Finish, 82 Degree Flat Undercut Head, Phillips Drive, Type F, #10-32 Thread Size, 3/8″ Length (Pack of 100)

Steel Thread Cutting Screw, Black Oxide Finish, 82 Degree Flat Undercut Head, Phillips Drive, Type F, #10-32 Thread Size, 3/8″ Length (Pack of 100) #ad - Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening. Black oxide finish offers mild corrosion resistance and lubricity. Thread cutting screw with type f point has machine screw threads that taper down to a blunt edge and is suitable for heavy gauge sheet metal, aluminum, cast iron, brass, and plastic. Flat undercut head has a flat top with an 82-degree cone-shaped bearing surface and is undercut for use in shallow countersunk holes. Steel is often used in applications where strength is the primary consideration.

 

Steel Thread Cutting Screw Zinc Plated Finish Hex Washer Head Slotted Drive Type F 10-32 Thread Size 14 Length Pack of 50 #ad

Steel Thread Cutting Screw, Zinc Plated Finish, Hex Washer Head, Slotted Drive, Type F, #10-32 Thread Size, 1/4″ Length (Pack of 50)

Steel Thread Cutting Screw, Zinc Plated Finish, Hex Washer Head, Slotted Drive, Type F, #10-32 Thread Size, 1/4″ Length (Pack of 50) #ad - Zinc plating resists corrosion and has a reflective appearance. Thread cutting screw with type f point has machine screw threads that taper down to a blunt edge and is suitable for heavy gauge sheet metal, aluminum, cast iron, brass, and plastic. Steel is often used in applications where strength is the primary consideration. Hex washer head has a flange for additional grip with the mating surface. Slotted drive has a linear slot for use with a flat-blade driver.

 

Steel Thread Cutting Screw Black Oxide Finish 82 Degree Flat Head Phillips Drive Type F 6-32 Thread Size 34 Length Pack of 100 #ad

Steel Thread Cutting Screw, Black Oxide Finish, 82 Degree Flat Head, Phillips Drive, Type F, #6-32 Thread Size, 3/4″ Length (Pack of 100)

Steel Thread Cutting Screw, Black Oxide Finish, 82 Degree Flat Head, Phillips Drive, Type F, #6-32 Thread Size, 3/4″ Length (Pack of 100) #ad - Steel is often used in applications where strength is the primary consideration. Flat head has an 82-degree cone-shaped bearing surface for use in countersunk holes and a flat top that fits flush with the mated surface. Black oxide finish offers mild corrosion resistance and lubricity. Thread cutting screw with type f point has machine screw threads that taper down to a blunt edge and is suitable for heavy gauge sheet metal, aluminum, cast iron, brass, and plastic. Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening.

 

18-8 Stainless Steel Thread Cutting Screw Plain Finish 82 Degree Flat Head Phillips Drive Type F 2-56 Thread Size 14 Length Pack of 100 #ad

18-8 Stainless Steel Thread Cutting Screw, Plain Finish, 82 Degree Flat Head, Phillips Drive, Type F, #2-56 Thread Size, 1/4″ Length (Pack of 100)

18-8 Stainless Steel Thread Cutting Screw, Plain Finish, 82 Degree Flat Head, Phillips Drive, Type F, #2-56 Thread Size, 1/4″ Length (Pack of 100) #ad - Flat head has an 82-degree cone-shaped bearing surface for use in countersunk holes and a flat top that fits flush with the mated surface. Thread cutting screw with type f point has machine screw threads that taper down to a blunt edge and is suitable for heavy gauge sheet metal, aluminum, cast iron, brass, and plastic. 18-8 stainless steel provides good corrosion resistance and strength. Plain surface has no finish or coating. Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening.

 

18-8 Stainless Steel Thread Cutting Screw Plain Finish 82 Degree Flat Undercut Head Phillips Drive Type F 8-32 Thread Size 34 Length Pack of 25 #ad

18-8 Stainless Steel Thread Cutting Screw, Plain Finish, 82 Degree Flat Undercut Head, Phillips Drive, Type F, #8-32 Thread Size, 3/4″ Length (Pack of 25)

18-8 Stainless Steel Thread Cutting Screw, Plain Finish, 82 Degree Flat Undercut Head, Phillips Drive, Type F, #8-32 Thread Size, 3/4″ Length (Pack of 25) #ad - 18-8 stainless steel provides good corrosion resistance and strength. Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening. Thread cutting screw with type f point has machine screw threads that taper down to a blunt edge and is suitable for heavy gauge sheet metal, aluminum, cast iron, brass, and plastic. Plain surface has no finish or coating. Flat undercut head has a flat top with an 82-degree cone-shaped bearing surface and is undercut for use in shallow countersunk holes.

 

18-8 Stainless Steel Thread Cutting Screw Plain Finish 82 Degree Flat Undercut Head Phillips Drive Type F 10-32 Thread Size 12 Length Pack of 50 #ad

18-8 Stainless Steel Thread Cutting Screw, Plain Finish, 82 Degree Flat Undercut Head, Phillips Drive, Type F, #10-32 Thread Size, 1/2″ Length (Pack of 50)

18-8 Stainless Steel Thread Cutting Screw, Plain Finish, 82 Degree Flat Undercut Head, Phillips Drive, Type F, #10-32 Thread Size, 1/2″ Length (Pack of 50) #ad - Plain surface has no finish or coating. Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening. 18-8 stainless steel provides good corrosion resistance and strength. Thread cutting screw with type f point has machine screw threads that taper down to a blunt edge and is suitable for heavy gauge sheet metal, aluminum, cast iron, brass, and plastic. Flat undercut head has a flat top with an 82-degree cone-shaped bearing surface and is undercut for use in shallow countersunk holes.

 

Steel Thread Cutting Screw Zinc Plated Finish Hex Washer Head Slotted Drive Type F 8-32 Thread Size 38 Length Pack of 100 #ad

Steel Thread Cutting Screw, Zinc Plated Finish, Hex Washer Head, Slotted Drive, Type F, #8-32 Thread Size, 3/8″ Length (Pack of 100)

Steel Thread Cutting Screw, Zinc Plated Finish, Hex Washer Head, Slotted Drive, Type F, #8-32 Thread Size, 3/8″ Length (Pack of 100) #ad - Hex washer head has a flange for additional grip with the mating surface. Steel is often used in applications where strength is the primary consideration. Slotted drive has a linear slot for use with a flat-blade driver. Zinc plating resists corrosion and has a reflective appearance. Thread cutting screw with type f point has machine screw threads that taper down to a blunt edge and is suitable for heavy gauge sheet metal, aluminum, cast iron, brass, and plastic.

 

Steel Thread Cutting Screw Zinc Plated 82 Degree Flat Head Phillips Drive Type F 516-18 Thread Size 1 Length Pack of 25 #ad

Steel Thread Cutting Screw, Zinc Plated, 82 Degree Flat Head, Phillips Drive, Type F, 5/16″-18 Thread Size, 1″ Length (Pack of 25)

Steel Thread Cutting Screw, Zinc Plated, 82 Degree Flat Head, Phillips Drive, Type F, 5/16″-18 Thread Size, 1″ Length (Pack of 25) #ad - Thread cutting screw with type f point has machine screw threads that taper down to a blunt edge and is suitable for heavy gauge sheet metal, aluminum, cast iron, brass, and plastic. Steel is often used in applications where strength is the primary consideration. Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening. Zinc plating resists corrosion and has a reflective appearance. Flat head has an 82-degree cone-shaped bearing surface for use in countersunk holes and a flat top that fits flush with the mated surface.

 

18-8 Stainless Steel Thread Cutting Screw Plain Finish Hex Washer Head Type F 10-24 Thread Size 12 Length Pack of 25 #ad

18-8 Stainless Steel Thread Cutting Screw, Plain Finish, Hex Washer Head, Type F, #10-24 Thread Size, 1/2″ Length (Pack of 25)

18-8 Stainless Steel Thread Cutting Screw, Plain Finish, Hex Washer Head, Type F, #10-24 Thread Size, 1/2″ Length (Pack of 25) #ad - Thread cutting screw with type f point has machine screw threads that taper down to a blunt edge and is suitable for heavy gauge sheet metal, aluminum, cast iron, brass, and plastic. Plain surface has no finish or coating. 18-8 stainless steel provides good corrosion resistance and strength. Hex washer head has a flange for additional grip with the mating surface and has six flat sides that a wrench can grip to turn from the side.

 

Steel Thread Cutting Screw Zinc Plated Finish Serrated Hex Washer Head Slotted Drive Type F 12-24 Thread Size 1-12 Length Pack of 50 #ad

Steel Thread Cutting Screw, Zinc Plated Finish, Serrated Hex Washer Head, Slotted Drive, Type F, #12-24 Thread Size, 1-1/2″ Length (Pack of 50)

Steel Thread Cutting Screw, Zinc Plated Finish, Serrated Hex Washer Head, Slotted Drive, Type F, #12-24 Thread Size, 1-1/2″ Length (Pack of 50) #ad - Zinc plating resists corrosion and has a reflective appearance. Thread cutting screw with type f point has machine screw threads that taper down to a blunt edge and is suitable for heavy gauge sheet metal, aluminum, cast iron, brass, and plastic. Steel is often used in applications where strength is the primary consideration. Slotted drive has a linear slot for use with a flat-blade driver. Hex washer head has a serrated flange for additional grip on the mating surface that resists loosening.

 

Steel Thread Cutting Screw Black Oxide Finish Pan Head Phillips Drive Type F 10-32 Thread Size 38 Length Pack of 100 #ad

Steel Thread Cutting Screw, Black Oxide Finish, Pan Head, Phillips Drive, Type F, #10-32 Thread Size, 3/8″ Length (Pack of 100)

Steel Thread Cutting Screw, Black Oxide Finish, Pan Head, Phillips Drive, Type F, #10-32 Thread Size, 3/8″ Length (Pack of 100) #ad - Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening. Pan head has a flat top and short vertical sides with a rounded top edge. Steel is often used in applications where strength is the primary consideration. Black oxide finish offers mild corrosion resistance and lubricity. Thread cutting screw with type f point has machine screw threads that taper down to a blunt edge and is suitable for heavy gauge sheet metal, aluminum, cast iron, brass, and plastic.

 

18-8 Stainless Steel Thread Cutting Screw Plain Finish 82 Degree Flat Undercut Head Phillips Drive Type F 10-24 Thread Size 716 Length Pack of 50 #ad

18-8 Stainless Steel Thread Cutting Screw, Plain Finish, 82 Degree Flat Undercut Head, Phillips Drive, Type F, #10-24 Thread Size, 7/16″ Length (Pack of 50)

18-8 Stainless Steel Thread Cutting Screw, Plain Finish, 82 Degree Flat Undercut Head, Phillips Drive, Type F, #10-24 Thread Size, 7/16″ Length (Pack of 50) #ad - Thread cutting screw with type f point has machine screw threads that taper down to a blunt edge and is suitable for heavy gauge sheet metal, aluminum, cast iron, brass, and plastic. Flat undercut head has a flat top with an 82-degree cone-shaped bearing surface and is undercut for use in shallow countersunk holes. 18-8 stainless steel provides good corrosion resistance and strength. Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening. Plain surface has no finish or coating.

 

410 Stainless Steel Thread Cutting Screw Plain Finish Pan Head Phillips Drive Type F 2-56 Thread Size 14 Length Pack of 100 #ad

410 Stainless Steel Thread Cutting Screw, Plain Finish, Pan Head, Phillips Drive, Type F, #2-56 Thread Size, 1/4″ Length (Pack of 100)

410 Stainless Steel Thread Cutting Screw, Plain Finish, Pan Head, Phillips Drive, Type F, #2-56 Thread Size, 1/4″ Length (Pack of 100) #ad - Thread cutting screw with type f point has machine screw threads that taper down to a blunt edge and is suitable for heavy gauge sheet metal, aluminum, cast iron, brass, and plastic. Pan head has a flat top and short vertical sides with a rounded top edge. 410 stainless steel has high strength and hardness, and resists corrosion in mild environments. Plain surface has no finish or coating. Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening.

 

18-8 Stainless Steel Thread Cutting Screw Plain Finish 82 Degree Flat Undercut Head Phillips Drive Type F 6-32 Thread Size 12 Length Pack of 100 #ad

18-8 Stainless Steel Thread Cutting Screw, Plain Finish, 82 Degree Flat Undercut Head, Phillips Drive, Type F, #6-32 Thread Size, 1/2″ Length (Pack of 100)

18-8 Stainless Steel Thread Cutting Screw, Plain Finish, 82 Degree Flat Undercut Head, Phillips Drive, Type F, #6-32 Thread Size, 1/2″ Length (Pack of 100) #ad - Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening. Plain surface has no finish or coating. Thread cutting screw with type f point has machine screw threads that taper down to a blunt edge and is suitable for heavy gauge sheet metal, aluminum, cast iron, brass, and plastic. Flat undercut head has a flat top with an 82-degree cone-shaped bearing surface and is undercut for use in shallow countersunk holes. 18-8 stainless steel provides good corrosion resistance and strength.

 

Steel Thread Cutting Screw Black Oxide Finish 82 Degree Flat Head Phillips Drive Type F 6-32 Thread Size 38 Length Pack of 100 #ad

Steel Thread Cutting Screw, Black Oxide Finish, 82 Degree Flat Head, Phillips Drive, Type F, #6-32 Thread Size, 3/8″ Length (Pack of 100)

Steel Thread Cutting Screw, Black Oxide Finish, 82 Degree Flat Head, Phillips Drive, Type F, #6-32 Thread Size, 3/8″ Length (Pack of 100) #ad - Flat head has an 82-degree cone-shaped bearing surface for use in countersunk holes and a flat top that fits flush with the mated surface. Steel is often used in applications where strength is the primary consideration. Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening. Thread cutting screw with type f point has machine screw threads that taper down to a blunt edge and is suitable for heavy gauge sheet metal, aluminum, cast iron, brass, and plastic. Black oxide finish offers mild corrosion resistance and lubricity.

 

Steel Thread Cutting Screw Zinc Plated Hex Head Type 23 516-18 Thread Size 12 Length Pack of 10 #ad

Steel Thread Cutting Screw, Zinc Plated, Hex Head, Type 23, 5/16″-18 Thread Size, 1/2″ Length (Pack of 10)

Steel Thread Cutting Screw, Zinc Plated, Hex Head, Type 23, 5/16″-18 Thread Size, 1/2″ Length (Pack of 10) #ad - Zinc plating resists corrosion and has a reflective appearance. Steel is often used in applications where strength is the primary consideration. Hex head tightens from the side with a wrench, enabling use when there is no space above for a driver. Thread cutting screw with type 23 point style has fine threads that taper down to a blunt point with a large cutting surface suitable for soft metal, provides excellent chip clearance, and requires minimal rotating force to install.

 

Steel Thread Cutting Screw Zinc Plated Hex Head Slotted Drive Type F 10-24 Thread Size 12 Length Pack of 100 #ad

Steel Thread Cutting Screw, Zinc Plated, Hex Head, Slotted Drive, Type F, #10-24 Thread Size, 1/2″ Length (Pack of 100)

Steel Thread Cutting Screw, Zinc Plated, Hex Head, Slotted Drive, Type F, #10-24 Thread Size, 1/2″ Length (Pack of 100) #ad - Steel is often used in applications where strength is the primary consideration. Thread cutting screw with type f point has machine screw threads that taper down to a blunt edge and is suitable for heavy gauge sheet metal, aluminum, cast iron, brass, and plastic. Zinc plating resists corrosion and has a reflective appearance. Slotted drive has a linear slot for use with a flat-blade driver. Hex head tightens from the side with a wrench, enabling use when there is no space above for a driver.

 

Steel Thread Cutting Screw Black Oxide Finish 82 Degree Flat Head Phillips Drive Type F 4-40 Thread Size 38 Length Pack of 100 #ad

Steel Thread Cutting Screw, Black Oxide Finish, 82 Degree Flat Head, Phillips Drive, Type F, #4-40 Thread Size, 3/8″ Length (Pack of 100)

Steel Thread Cutting Screw, Black Oxide Finish, 82 Degree Flat Head, Phillips Drive, Type F, #4-40 Thread Size, 3/8″ Length (Pack of 100) #ad - Thread cutting screw with type f point has machine screw threads that taper down to a blunt edge and is suitable for heavy gauge sheet metal, aluminum, cast iron, brass, and plastic. Steel is often used in applications where strength is the primary consideration. Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening. Flat head has an 82-degree cone-shaped bearing surface for use in countersunk holes and a flat top that fits flush with the mated surface. Black oxide finish offers mild corrosion resistance and lubricity.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.