19 Best and Coolest Router Lifts

 

Woodtek 166832 Portable Power Tool Accessories Routers Trimmers Woodtek Router Lift Dust Shroud #ad

Woodtek 166832, Portable Power Tool Accessories, Routers & Trimmers, Woodtek Router Lift Dust Shroud

Woodtek 166832, Portable Power Tool Accessories, Routers & Trimmers, Woodtek Router Lift Dust Shroud #ad - Shipping weight 15 lbs. Inside box dimensions 13-5/8″ tall x 12-7/8″ wide x 10″ deep. Outer box dimensions with top flange13-3/4″ tall x 15″ wide x 12-1/8″ deep. The woodtek® downdraft router table dust shroud is made of 17-gauge sheet metal for durability and long life. Net weight 14 lbs. Adjustable side vent to let air in to keep router motor cool. Combo dust port has 2-1/2″ port to connect 2-1/2″ hose to fence assembly dust port and 4″ port to connect to 4″ ready dust collectors. One inch top flange allows mounting to the underside of mdf, phenolic, laminate and other similar router table tops. Imported. . Catch the dust at the source for cleaner cuts and a cleaner shop. Easy to assemble in less than 15 minutes. Includes 2’ length of 2-1/2″ clear polyvinyl wire reinforced hose and 2 wire hose clamps. Specifications outer box dimensions 13-3/4″ tall x 13″ wide x 10-1/8″ deep (14-1/8″ deep with dust port attached). Recommended for use only with dust collectors that have a minimum 4″ inlet diameter. Adjustable nylon cord restraining plate. Predrilled to fit woodtek® cast iron table tops 165-557 and 165-548.

 

JessEm Rout-R-Lift II Router Lift For 3-12 Diameter Motors JessEm 02310 by JESSEM TOOL CO #ad

JessEm Rout-R-Lift II Router Lift For 3-1/2″ Diameter Motors, JessEm# 02310 by JESSEM TOOL CO.

JessEm Rout-R-Lift II Router Lift For 3-1/2″ Diameter Motors, JessEm# 02310 by JESSEM TOOL CO. #ad - Router table insert ring set, 97mm od, fits sears craftsman & ryobi, set of 3#0035/13. This clearance is enough to allow for air flow as well as stock support while routing. Set includes solid, 3/4-inch, 7/8-inch, 1-3/8-inch, 1-5/8-inch, 1-7/8-inch, 2-1/8-inch, and 2-3/8-inch. For ideal stock support, it’s recommended that the router bit opening be approximately 1/8″ to -1/4″ larger than the bit diameter. This set of eight is in addition to the standard three rings supplied with each woodpeckers router mounting plate and router lift. Jessem rout-r-lift ii router lift for 3-1/2 diameter motors, jessem# 02310. Each ring is molded of abs reinforced with polycarbonate.

 

JessEm Rout-R-Lift II Router Lift For 3-12 Diameter Motors JessEm 02310 by JessEm #ad

JessEm Rout-R-Lift II Router Lift For 3-1/2 Diameter Motors, JessEm# 02310 by JessEm

JessEm Rout-R-Lift II Router Lift For 3-1/2 Diameter Motors, JessEm# 02310 by JessEm #ad - Includes 3 self-leveling, twist lock insert rings 1-inch, 2-5/8-inch and a step ring. Jessem rout-r-lift ii router lift for 3-1/2 diameter motors, jessem# 02310. Adjustable reference scale can be set to zero from any bit position. Lift mounted to heavy gauge aluminum insert plate. Micro adjust thumb wheel eliminates the need for a crank handle.

 

Woodtek 966049 Portable Power Tool Accessories Routers Trimmers Router Lift 24x16 Ci Table 24 Fence #ad

Woodtek 966049, Portable Power Tool Accessories, Routers & Trimmers, Router Lift, 24″x16″ Ci Table, 24″ Fence

Woodtek 966049, Portable Power Tool Accessories, Routers & Trimmers, Router Lift, 24″x16″ Ci Table, 24″ Fence #ad - 2-year limited warranty. Enables round router motors that are 35 inches in diameter to be used with prolift ni router lift. Set consisting of 1 woodtek deluxe router lift 1 small cast iron router table 27″ x 16″ 1 fence ass’y for 27″ x 16″ cast iron router table. 42- to 35-inch range. Professional grade.

 

JESSEM Rout-R-Lift II Included Router Table System With Phenolic Top #ad

JESSEM Rout-R-Lift II Included Router Table System With Phenolic Top

JESSEM Rout-R-Lift II Included Router Table System With Phenolic Top #ad - 32″ x 24″ phenolic table with aluminum extruded miter track. Mast-r-fence ii router table fence with fully adjustable fence faces. Rigid, heavy-duty steel stand with upper and lower stretchers. Includes jessem rout-r-lift ii for 3-1/2″-diameter router motors. Fence position maintained by side mounted adjustable fence tracks.

 

Woodtek 166943 Portable Power Tool Accessories Routers Trimmers 4 Pc Twist Lock Insert Ring Set FWdtk Router Lift #ad

Woodtek 166943, Portable Power Tool Accessories, Routers & Trimmers, 4 Pc Twist Lock Insert Ring Set F/Wdtk Router Lift

Woodtek 166943, Portable Power Tool Accessories, Routers & Trimmers, 4 Pc Twist Lock Insert Ring Set F/Wdtk Router Lift #ad - Opening sizes 1/4″, 1/2″, 1-1/2″, and 2-1/2″. Molded from a polycarbonate reinforced abs. Made to fit woodtek® deluxe router lift 165-545. Helps maintain proper clearance for safer and improved routing. It’s recommended that the bit opening be approximately 1/8″ to 1/4″ larger than the diameter of the router bit. Woodtek® 4 piece twist lock insert ring set molded from polycarbonate abs provides stock support while routing as well as clearance for good airflow. Imported. 86″ (98mm) insert openings can be machined to other diameters. Outside diameter 3.

 

JessEm Mast-R-Lift II 02120 Router Lift 9-14-Inch by 11-34-Inch by JessEm Tool Company #ad

JessEm Mast-R-Lift II 02120 Router Lift, 9-1/4-Inch by 11-3/4-Inch by JessEm Tool Company

JessEm Mast-R-Lift II 02120 Router Lift, 9-1/4-Inch by 11-3/4-Inch by JessEm Tool Company #ad - Exclusive cam locking systemdouble sealed bearing constructionbit changes above the table for all routersmachined from 3/8-inch solid aluminum and hard anodized for durabilityfits most fixed base routers on the market today.

 

Woodtek 167690 Portable Power Tool Accessories Routers Trimmers Wrench For Router Lift Insert Rings #ad

Woodtek 167690, Portable Power Tool Accessories, Routers & Trimmers, Wrench For Router Lift Insert Rings

Woodtek 167690, Portable Power Tool Accessories, Routers & Trimmers, Wrench For Router Lift Insert Rings #ad - Shipping weight 19. Made to fit woodtek® 32″ x 24″ cast iron table 165-548 and woodtek® 27″ x 16″ cast iron table 165-557. Includes height adjustments handle, (1) 3-3/4″ diameter ring insert with 1-1/2″ opening, insert spanner wrench, starter pin. Lift is designed for large 4″ diameter routers. Optional 3-1/4″ collar adapter 165-566 and 3-1/2″ collar adapter 165-569 are available to fit smaller diameter router motors. Rated “best overall” by fine woodworking magazine. Tool-less scale adjustments can be set to zero from any bit position then incremented to intervals as small as. Will fit other router table tops with an 11-3/4″ x 9-1/4″ opening and 3/4″ radius corners four post raising mechanism guarantees router motor and router bit stays perfectly square. Imported. Smooth above-the-table adjustment mechanism for fast tool changes and precision bit setting. The massive lift mechanism, which comprises four threaded posts connected by a chain and sprocket, is precise with little to no backlash. 4 lbs. 002″. Net weight 15. The woodtek® deluxe router lift is rock-solid with a 9-1/4″ x 11-3/4″ clear anodized 1/4″ thick aluminum top plate. 8 lbs. Insert ring twists and locks into place with a spanner wrench.

 

Woodtek 165545 Portable Power Tool Accessories Routers Trimmers Woodtek Deluxe Router Lift #ad

Woodtek 165545, Portable Power Tool Accessories, Routers & Trimmers, Woodtek Deluxe Router Lift

Woodtek 165545, Portable Power Tool Accessories, Routers & Trimmers, Woodtek Deluxe Router Lift #ad - Quickly change cutters from above the table with a quick 1/4 turn of the wrench. Use with any router table or any router lift to give you the cutter height you need and convenience you will love includes 1/4 to 1/2 adapter and hex key. Dynamically balanced and machined from fatigue proof steel allows running larger cutters. No need to search for your spindle lock or use a pair of wrenches to change bits again. Short length and massive body eliminate deflection found with other extensions.

 

JessEm Mast-R-Lift II 02121 Router Lift 8-14-Inch by 11-34-Inch #ad

JessEm Mast-R-Lift II 02121 Router Lift, 8-1/4-Inch by 11-3/4-Inch

JessEm Mast-R-Lift II 02121 Router Lift, 8-1/4-Inch by 11-3/4-Inch #ad - We figure we must be doing something right if our competition follows our lead. The shafts on the mast-r-lift ii like all our router lifts are pressed into a shaft mount with hydraulic pressure what you get the mast-r-lift ii comes with a 2″ insert ring to reduce the size of the bit opening in the plate and the opening is large enough to accommodate a 3-1/2″ diameter bit without an insert installed. The mast-r-lift ii is a precision piece of engineering that you will be proud to own and find use whenever you are in your work shop. All of jessem’s lifts have the patented feature of adding tension to the threaded spindle to remove any backlash while adding some resistance to the rotation of the thread. Hard anodizing is an engineered surface treatment that provides a thick abrasion resistant coating and is not just a cosmetic treatment that will wear off. The hard anodizing process used on the plate is several times more expensive then but we want your lift to provide many years of service. This removed any vibration from the thread clearance and also prevented the spindle from moving and changing your setting while routing. Now we have developed the ultimate lift with features, built in accuracy and ease of use that we would want ourselves. Our lifts and plates all feature our tab-loctm design insert rings which are another jessem innovation that is common on many other manufacturers’ products today. We invented the lift because we too are woodworkers. Adjusting a router in a table mounted operation was very difficult to do accurately before the first router lift in 1999.

 

Pro Phenolic Router Table Fence Stand FX Router Lift #ad

Pro Phenolic Router Table, Fence, Stand, & FX Router Lift

Pro Phenolic Router Table, Fence, Stand, & FX Router Lift #ad - (2-1/4″ i. Router lift fx includes insert ring with 1-1/2″ opening. Aluminum fence backer features front- and rear-mounted universal t-tracks that accept 5/16″ t-bolts, 1/4″ t-bolts, and 1/4″ hex bolts. The router lift fx accepts the following routers porter-cable 690/890 series, bosch 1617-16-18, dewalt 610, 616, 618. D. Large opening in fence for big router bits. Our brand-new pro tables feature one-piece 3/4″ solid phenolic construction for an ultra-flat, low-friction surface that won’t warp, dent, scratch or delaminate, and the whiter, brighter finish enhances visibility. Includes bit safety guard for safe routing. Fence features a 2-1/2″ o. Includes new, larger steel stand, which measures 18″d x 24″w x 32″h. These packages include our steel stand and the acclaimed router lift fx for effortless above-table adjustments and bit changes. ) Dust port. 24″ x 32″ table for over five square feet of surface area. Includes our acclaimed rockler router lift fx for above-table bit height adjustments and bit changes. Featuring 8-points of plate leveling and 2 locking points. 24″ x 32″ table. 10-point plate leveling/locking system. Ergonomic t-knobs for easy fence adjustment. Includes rockler pro fence with extruded aluminum backer for straight, accurate cuts. Included aluminum pro fence features two adjustable white melamine mdf faces, front- and rear-facing accessory t-tracks and an included dust port and bit guard. 8-1/4″ x 11-3/4″ x 1/4″ aluminum plate. 3/4″ t-profile miter slot allows you to use precision aftermarket miter gauges, while universal t-tracks in both the fence and table accept stops, hold-downs and more. D.

 

Woodtek 966014 Portable Power Tool Accessories Routers Trimmers Woodtek Deluxe Workbench Router Lift System #ad

Woodtek 966014, Portable Power Tool Accessories, Routers & Trimmers, Woodtek Deluxe Workbench Router Lift System

Woodtek 966014, Portable Power Tool Accessories, Routers & Trimmers, Woodtek Deluxe Workbench Router Lift System #ad - Jessem rout-r-lift ii router lift for 3-1/2 diameter motors, jessem# 02310. Lift mounted to heavy gauge aluminum insert plate. Micro adjust thumb wheel eliminates the need for a crank handle. Set consisting of 1 woodtek deluxe router lift 1 small cast iron router table 27″ x 16″ 1 fence ass’y for 27″ x 16″ cast iron router table 1 stand set for 27″ x 16″ router table 1 woodtek router lift dust shroud. Adjustable reference scale can be set to zero from any bit position.

 

JessEm Rout-R-Lift II Router Lift For 3-12 Diameter Motors JessEm 02310 by JessEm #ad

JessEm Rout-R-Lift II Router Lift For 3-1/2 Diameter Motors, JessEm# 02310 by JessEm

JessEm Rout-R-Lift II Router Lift For 3-1/2 Diameter Motors, JessEm# 02310 by JessEm #ad - Dual steel support struts and heavy-duty construction support the largest routers and lifts. Combination miter and t-slot. Jessem rout-r-lift ii router lift for 3-1/2 diameter motors, jessem# 02310. Phenolic insert plate and dual reducing rings. Easy-slide micro-dot surface.

 

MLCS 9564 3-14 HP Variable Speed Router Motor for Router Lifts with No Base included 42 #ad

MLCS 9564 3-1/4 HP Variable Speed Router Motor for Router Lifts with No Base included, 4.2″

MLCS 9564 3-1/4 HP Variable Speed Router Motor for Router Lifts with No Base included, 4.2″ #ad - 4. The variable speed range on this heavy duty router is 10,000 to 22,000rpm, so no external speed control is needed and it will handle all of your routing operations. The mlcs heavy duty 15 amp router motor is made to handle the largest router bits on the market. 2″ diameter motor. Cutting with a 3-1/2″ diameter raised panel bit will be no problem. Included with the motor are 1/4″ and 1/2″ collets plus 2 offset collet wrenches. No base included.

 

Woodtek 165569 Portable Power Tool Accessories Routers Trimmers 3-12 Id X 4 2 Od Adapter FWoodtek Router Lift #ad

Woodtek 165569, Portable Power Tool Accessories, Routers & Trimmers, 3-1/2″ Id X 4. 2″ Od Adapter F/Woodtek Router Lift

Woodtek 165569, Portable Power Tool Accessories, Routers & Trimmers, 3-1/2″ Id X 4. 2″ Od Adapter F/Woodtek Router Lift #ad - Router table insert ring set, 97mm od, fits sears craftsman & ryobi, set of 3#0035/13. This set of eight is in addition to the standard three rings supplied with each woodpeckers router mounting plate and router lift. Enables use of three-and-one-half-inch router motors. Set includes solid, 3/4-inch, 7/8-inch, 1-3/8-inch, 1-5/8-inch, 1-7/8-inch, 2-1/8-inch, and 2-3/8-inch. For ideal stock support, it’s recommended that the router bit opening be approximately 1/8″ to -1/4″ larger than the bit diameter. Each ring is molded of abs reinforced with polycarbonate. Jessem rout-r-lift ii router lift for 3-1/2 diameter motors, jessem# 02310.

 

Woodpeckers Precision Woodworking Tools PRL-V2-420 Precision Router Lift #ad

Woodpeckers Precision Woodworking Tools PRL-V2-420 Precision Router Lift

Woodpeckers Precision Woodworking Tools PRL-V2-420 Precision Router Lift #ad - Built to deliver years of trouble free performance. The prl-v2-420 fits the porter cable 7518 router. Patented quick-lift wrench allows you to bypass the micro-adjustment mechanism and elevate the router collet so you can use your wrenches above the table. Thumb wheel micro adjuster allow quick and easy bit height adjustments with easy reading scale built into the top. Augments basic router plate capabilities with a bulletproof lift mechanism and an impressive array of time saving, precision enhancing features that are accessible from the top of the plate. .

 

Bench Dog Cast Iron Router Table Pro Router Lift Pro Fence Steel Cabinet #ad

Bench Dog Cast Iron Router Table, Pro Router Lift, Pro Fence, & Steel Cabinet

Bench Dog Cast Iron Router Table, Pro Router Lift, Pro Fence, & Steel Cabinet #ad - 32″ pro fence is precision machined for flatness and squareness, and includes front- and rear-mounted universal accessory t-tracks. Prolift is compatible with porter-cable 7518 & 7519 adapters for other routers available separately. Cast iron table top measures 24″ x 32″ x 1-1/2″, over 5 square feet of surface area. Universal t-tracks accept 1/4″ and 5/16″ t-bolts as well as 1/4″ hex bolts-perfect for hold-downs, stops, featherboards and more. Its 12-point plate-leveling/locking system guarantees a secure, flush interface with the included bench dog prolift router lift. Plus, it’s loaded with features dual t-tracks in the table a standard miter slot and a universal t-track for accessories. . Add to that the included steel cabinet with it’s unique internal dust bucket, and you have something that looks more like an industrial shaper than a router table. The end result a long working life of incredibly smooth operation. Enclosed steel cabinet is built of solid galvanized steel. Cabinet includes integrated dust bucket for superior dust collection. Meet the ultimate router table, complete with a fence, plate, steel cabinet, and a router lift at 24″ x 32″ x 1-1/2″, the bench dog cast-iron router table is the largest, flattest, and most durable option on the market. Two integral casters allow you to tip and roll the entire router table. If you’re after the ultimate table top, the pinnacle of size, stability, and durability, look no further than the promax rt. Weighing in at nearly 100 pounds, it’s built from one solid piece of 1-1/2″ thick cast iron to absorb vibration better than any table on the market. Plus, you get the 32″ profence, a precision-milled aluminum fence with two mdf sub-fences, front and rear t-tracks, a 2-1/2″ dust port and an integrated bit guard. Weighing in at nearly 100 lbs, the one-piece top provides more than 5 square feet of ultra-flat work surface.

 

Rockler Pro Phenolic Router Table Fence FX Router Lift #ad

Rockler Pro Phenolic Router Table, Fence, & FX Router Lift

Rockler Pro Phenolic Router Table, Fence, & FX Router Lift #ad - Our brand-new pro tables feature one-piece 3/4″ solid phenolic construction for an ultra-flat, low-friction surface that won’t warp, dent, scratch or delaminate. Router lift fx includes insert ring with 1-1/2″ opening. D. ) Dust port. Fence features a 2-1/2″ o. The router lift fx accepts the following routers porter-cable 690/890 series, bosch 1617-16-18, dewalt 610, 616, 618. Large opening in fence for big router bits. Ergonomic t-knobs for easy fence adjustment. The whiter, brighter finish enhances visibility, while the included router lift fx allows effortless above-table adjustments and bit changes. Aluminum fence backer features front- and rear-mounted universal t-tracks that accept 5/16″ t-bolts, 1/4″ t-bolts, and 1/4″ hex bolts. (2-1/4″ i. Includes bit safety guard for safe routing. Includes our acclaimed rockler router lift fx for above-table bit height adjustments and bit changes. D. 3/4″ t-profile miter slot allows you to use precision aftermarket miter gauges, while universal t-tracks in both the fence and table accept stops, hold-downs and more. Includes rockler pro fence with extruded aluminum backer for straight, accurate cuts. Included aluminum pro fence features two adjustable white melamine mdf faces, front- and rear-facing accessory t-tracks and an included dust port and bit guard. Featuring 8-points of plate leveling and 2 locking points. 24″ x 32″ table for over five square feet of surface area.

 

JessEm Rout-R-Lift II Router Lift For 3-12 Diameter Motors JessEm 02310 #ad

JessEm Rout-R-Lift II Router Lift For 3-1/2″ Diameter Motors, JessEm# 02310

JessEm Rout-R-Lift II Router Lift For 3-1/2″ Diameter Motors, JessEm# 02310 #ad - This model is designed for use with porter-cable 690/890 series, bosch 1617/1618 series, dewalt 610/618 series, and craftsman 1754x/28190/ 28084 router motors. The new rout-r-lift ii from jessem tool brings affordable precision to the entry-level router lift market.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.