19 Best Square Noses in 2020

 

CGC Tools CEM14F3TIALN Primate Square Nose End Mill TiAlN Coating 3 Flute 14 Diameter 34 LOC 2-12 OAL

CGC Tools CEM14F3TIALN Primate Square Nose End Mill, TiAlN Coating, 3 Flute, 1/4″ Diameter, 3/4″ LOC, 2-1/2″ OAL

CGC Tools CEM14F3TIALN Primate Square Nose End Mill, TiAlN Coating, 3 Flute, 1/4″ Diameter, 3/4″ LOC, 2-1/2″ OAL - Highest transverse rupture strength (trs) nano-grain carbide substrate available and completely resharpenable. This weapon of mass production destroy any competition. Gmp edge prepped to hone the “ridges” to reduce fracturing during the milling process while greatly increasing tool life and enhancing finish. Usa, flat, 3 flute, 1/4” diameter, 3/4” length of cut, 2-1/2” overall length, tialn coating. Extremely versatile in various materials, center cutting, solid sub-micron carbide.

 

CGC Tools GMA18F3 Gorilla Silverback Carbide Square Nose End Mill for Aluminum Flat End 3 Flute 18 Diameter 12 LOC 1-12 OAL

CGC Tools GMA18F3 Gorilla Silverback Carbide Square Nose End Mill for Aluminum, Flat End, 3 Flute, 1/8″ Diameter, 1/2″ LOC, 1-1/2″ OAL

CGC Tools GMA18F3 Gorilla Silverback Carbide Square Nose End Mill for Aluminum, Flat End, 3 Flute, 1/8″ Diameter, 1/2″ LOC, 1-1/2″ OAL - Usa, silverback, flat, 3 flute, 1/8″ diameter, 1/2″ length of cut, 1-1/2″ overall length. Gmp edge prepped to hone the “ridges” to reduce fracturing during the milling process while greatly increasing tool life and enhancing finish. Highest transverse rupture strength (trs) nano-grain carbide substrate available and completely resharpenable. Engineered to repel aluminum for roughing and finishing of non-ferrous materials, high velocity, high material removal rate.

 

Melin Tool CCMG Carbide Micro Square Nose End Mill Uncoated Bright Finish 30 Deg Helix 4 Flutes 15000 Overall Length 00700 Cutting Diameter 0125 Shank Diameter

Melin Tool CCMG Carbide Micro Square Nose End Mill, Uncoated (Bright) Finish, 30 Deg Helix, 4 Flutes, 1.5000″ Overall Length, 0.0700″ Cutting Diameter, 0.125″ Shank Diameter

Melin Tool CCMG Carbide Micro Square Nose End Mill, Uncoated (Bright) Finish, 30 Deg Helix, 4 Flutes, 1.5000″ Overall Length, 0.0700″ Cutting Diameter, 0.125″ Shank Diameter - 30 degree helix angle. Round shanks allow use with a wide variety of toolholding systems. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Square end. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems.

 

Yearfits 332 Blade x 18 Shank x 2Solid Micro Carbide4 FluteSquare Nose End MillTiAlN CoatedCNC Router Bits Cutter Milling Tools used for steel 332

Yearfits 3/32 Blade x 1/8 Shank x 2”,Solid Micro Carbide,4 Flute,Square Nose End Mill,TiAlN Coated,CNC Router Bits Cutter Milling Tools (used for steel, 3/32)

Yearfits 3/32 Blade x 1/8 Shank x 2”,Solid Micro Carbide,4 Flute,Square Nose End Mill,TiAlN Coated,CNC Router Bits Cutter Milling Tools (used for steel, 3/32) - Package 1 pack endmill cutter. Materialmicro solid carbide(tungsten),high quality tialn coating,long tool life. 3/32 cutting diameter1/8 shank diameter236 inch flute length,2”full length,4 flute. Recommend for cnc side milling,die sinking and slotting. Suitable for process copply,alloy,iron,stainless steel and mold steel middle-low speed.

 

CGC Tools CEM38F3TICN Primate Square Nose End Mill TiCN Coating 3 Flute 38 Diameter 78 LOC 2-12 OAL

CGC Tools CEM38F3TICN Primate Square Nose End Mill, TiCN Coating, 3 Flute, 3/8″ Diameter, 7/8″ LOC, 2-1/2″ OAL

CGC Tools CEM38F3TICN Primate Square Nose End Mill, TiCN Coating, 3 Flute, 3/8″ Diameter, 7/8″ LOC, 2-1/2″ OAL - Extremely versatile in various materials, center cutting, solid sub-micron carbide. This weapon of mass production destroy any competition. Highest transverse rupture strength (trs) nano-grain carbide substrate available and completely resharpenable. Gmp edge prepped to hone the “ridges” to reduce fracturing during the milling process while greatly increasing tool life and enhancing finish.

 

Heavy-Duty Black 48 Wide Vinyl Square Nose 14 Thickness Commercial Grade Stair Tread

Heavy-Duty Black 48″ Wide Vinyl Square Nose 1/4″ Thickness Commercial Grade Stair Tread

Heavy-Duty Black 48″ Wide Vinyl Square Nose 1/4″ Thickness Commercial Grade Stair Tread - Install with water-based stair tread contact adhesive or quick-drying neoprene contact cement secure inside of nose with epoxy stair caulk, sold separately. Federal spec zz-t-001237 (gsa-fss). Federal spec rr-t-650e type b. Weight 15 lbs / lin ft. Thickness 1/4″ at nose (tapers to 1/8″) 1-1/4″ square nose 12″ depth.

 

CGC Tools CEM12F4TIALN Primate Square Nose End Mill TiAlN Coating 4 Flute 12 Diameter 1 LOC 3 OAL

CGC Tools CEM12F4TIALN Primate Square Nose End Mill, TiAlN Coating, 4 Flute, 1/2″ Diameter, 1″ LOC, 3″ OAL

CGC Tools CEM12F4TIALN Primate Square Nose End Mill, TiAlN Coating, 4 Flute, 1/2″ Diameter, 1″ LOC, 3″ OAL - Extremely versatile in various materials, center cutting, solid sub-micron carbide. Gmp edge prepped to hone the “ridges” to reduce fracturing during the milling process while greatly increasing tool life and enhancing finish. This weapon of mass production destroy any competition. Highest transverse rupture strength (trs) nano-grain carbide substrate available and completely resharpenable. Usa, flat, 4 flute, 1/2” diameter, 1” length of cut, 3” overall length, tialn coating.

 

CGC Tools CEM332F4 Primate Square Nose End Mill 4 Flute 332 Diameter 38 LOC 1-12 OAL 18 Shank

CGC Tools CEM332F4 Primate Square Nose End Mill, 4 Flute, 3/32″ Diameter, 3/8″ LOC, 1-1/2″ OAL, 1/8″ Shank

CGC Tools CEM332F4 Primate Square Nose End Mill, 4 Flute, 3/32″ Diameter, 3/8″ LOC, 1-1/2″ OAL, 1/8″ Shank - This weapon of mass production destroy any competition. Highest transverse rupture strength (trs) nano-grain carbide substrate available and completely resharpenable. Gmp edge prepped to hone the “ridges” to reduce fracturing during the milling process while greatly increasing tool life and enhancing finish. Extremely versatile in various materials, center cutting, solid sub-micron carbide.

 

YG-1 E5977 Carbide Square Nose End Mill Extra Long Reach Uncoated Bright Finish Finishing Cut Non-Center Cutting 37 Deg Helix 3 Flutes 6 Overall Length 05 Cutting Diameter 05 Shank Diameter

YG-1 E5977 Carbide Square Nose End Mill, Extra Long Reach, Uncoated (Bright) Finish, Finishing Cut, Non-Center Cutting, 37 Deg Helix, 3 Flutes, 6″ Overall Length, 0.5″ Cutting Diameter, 0.5″ Shank Diameter

YG-1 E5977 Carbide Square Nose End Mill, Extra Long Reach, Uncoated (Bright) Finish, Finishing Cut, Non-Center Cutting, 37 Deg Helix, 3 Flutes, 6″ Overall Length, 0.5″ Cutting Diameter, 0.5″ Shank Diameter - 37-degree helix angle provides increased cutting action and chip evacuation compared to the standard 30-degree helix. Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures. Three flutes provide better chip-carrying capacity than four flutes and a finer finish than two, reducing the need for a second finishing cut in some applications. Suitable for high-performance machining on aluminum and other nonferrous materials. Extended-reach neck style provides access to recessed areas of the workpiece.

 

Robert Sorby 823H 1 Square Nose Scraper  21 Overall Length 823H-1

Robert Sorby 823H 1″ Square Nose Scraper 21″ Overall Length 823H-1″

Robert Sorby 823H 1″ Square Nose Scraper 21″ Overall Length 823H-1″ - This hss 1″ square nose tool will keep a sharpened edge about six times longer than carbon steel and resist “blued” softening from overheating during grinding or from heavy turning. Overall lengths 17″ to 21″. Ash handles offer firm hand control during use and brass ferrules prevent wood splitting from tool pressure.

 

Niagara Cutter N61635 Carbide Square Nose End Mill Inch TiCN Finish Roughing and Finishing Cut 45 Degree Helix 3 Flutes 25 Overall Length 0250 Cutting Diameter 0250 Shank Diameter

Niagara Cutter N61635 Carbide Square Nose End Mill, Inch, TiCN Finish, Roughing and Finishing Cut, 45 Degree Helix, 3 Flutes, 2.5″ Overall Length, 0.250″ Cutting Diameter, 0.250″ Shank Diameter

Niagara Cutter N61635 Carbide Square Nose End Mill, Inch, TiCN Finish, Roughing and Finishing Cut, 45 Degree Helix, 3 Flutes, 2.5″ Overall Length, 0.250″ Cutting Diameter, 0.250″ Shank Diameter - Three flutes provide better chip-carrying capacity than four flutes and a finer finish than two, reducing the need for a second finishing cut in some applications. Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures. 45-degree helix provides the efficient cutting action and chip evacuation required to machine aluminum and other nonferrous materials. Titanium carbon nitride (ticn) coating lubricates the end mill for high-temperature stability and offers the abrasion resistance required to machine aluminum and other nonferrous materials. Square nose end mills (also called square end) create sharp, unrounded cuts.

 

Dark Gray Stair Tread Rubber Square Nose 48L

Dark Gray Stair Tread Rubber Square Nose 48″L

Dark Gray Stair Tread Rubber Square Nose 48″L - Weldon shanks feature a round shank with one of more flats machined into the side for easy indexing and alignment. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Not to be used for plunge cutting. Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys. Can be used in profiling, keyways, and pockets.

 

Melin Tool CC Cobalt Steel Square Nose End Mill Weldon Shank Uncoated Bright Finish 30 Deg Helix 4 Flutes 33750 Overall Length 05313 Cutting Diameter 05 Shank Diameter

Melin Tool CC Cobalt Steel Square Nose End Mill, Weldon Shank, Uncoated (Bright) Finish, 30 Deg Helix, 4 Flutes, 3.3750″ Overall Length, 0.5313″ Cutting Diameter, 0.5″ Shank Diameter

Melin Tool CC Cobalt Steel Square Nose End Mill, Weldon Shank, Uncoated (Bright) Finish, 30 Deg Helix, 4 Flutes, 3.3750″ Overall Length, 0.5313″ Cutting Diameter, 0.5″ Shank Diameter - Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Used for general purpose milling in most materials of medium and tough alloy materials such as stainless steel, nickel base alloy, brass, iron, etc. Weldon shanks feature a round shank with one of more flats machined into the side for easy indexing and alignment. 30 degree helix angle.

 

YG-1 E1072 High Speed Steel HSS Square Nose End Mill Extra Long Reach Weldon Shank Uncoated Bright Finish 42 Deg Helix 2 Flutes 5 Overall Length 05 Cutting Diameter 05 Shank Diameter

YG-1 E1072 High Speed Steel (HSS) Square Nose End Mill, Extra Long Reach, Weldon Shank, Uncoated (Bright) Finish, 42 Deg Helix, 2 Flutes, 5″ Overall Length, 0.5″ Cutting Diameter, 0.5″ Shank Diameter

YG-1 E1072 High Speed Steel (HSS) Square Nose End Mill, Extra Long Reach, Weldon Shank, Uncoated (Bright) Finish, 42 Deg Helix, 2 Flutes, 5″ Overall Length, 0.5″ Cutting Diameter, 0.5″ Shank Diameter - Two flutes offer better chip-carrying capacity than end mills with more flutes, enhancing the tool’s ability to remove material. Extra-long-length end mills have longer cutting edges and can make deeper cuts than long-length end mills. Suitable for machining on aluminum and other nonferrous materials. 42-degree helix provides increased cutting action compared to end mills with lower helix angles. High-speed steel for general-purpose cutting.

 

YG-1 E5020 Carbide Square Nose End Mill Uncoated Bright Finish 30 Deg Helix 2 Flutes 25 Overall Length 025 Cutting Diameter 025 Shank Diameter

YG-1 E5020 Carbide Square Nose End Mill, Uncoated (Bright) Finish, 30 Deg Helix, 2 Flutes, 2.5″ Overall Length, 0.25″ Cutting Diameter, 0.25″ Shank Diameter

YG-1 E5020 Carbide Square Nose End Mill, Uncoated (Bright) Finish, 30 Deg Helix, 2 Flutes, 2.5″ Overall Length, 0.25″ Cutting Diameter, 0.25″ Shank Diameter - Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures. Uncoated (bright) tools have no additional surface treatment or coating for use on a broad range of materials. Two flutes offer better chip-carrying capacity than end mills with more flutes, enhancing the tool’s ability to remove material. Suitable for machining on hardened and high-alloy steel, chromium-nickel steel, steel casting, malleable cast iron, brass, copper, aluminum with a high percentage of silicon, and abrasive plastic. Center-cutting design allows the end mill to plunge into material like a drill bit for applications such as slotting, drilling, and pocketing, as well as general-purpose machining.

 

YG-1 E5982 Carbide Square Nose End Mill Extra Long Reach Uncoated Bright Finish Finishing Cut Non-Center Cutting 45 Deg Helix 3 Flutes 6 Overall Length 075 Cutting Diameter 075 Shank Diameter

YG-1 E5982 Carbide Square Nose End Mill, Extra Long Reach, Uncoated (Bright) Finish, Finishing Cut, Non-Center Cutting, 45 Deg Helix, 3 Flutes, 6″ Overall Length, 0.75″ Cutting Diameter, 0.75″ Shank Diameter

YG-1 E5982 Carbide Square Nose End Mill, Extra Long Reach, Uncoated (Bright) Finish, Finishing Cut, Non-Center Cutting, 45 Deg Helix, 3 Flutes, 6″ Overall Length, 0.75″ Cutting Diameter, 0.75″ Shank Diameter - Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures. 45-degree helix provides increased cutting action compared to end mills with lower helix angles. Long-length end mills have longer cutting edges and can make deeper cuts than standard-length end mills. Three flutes provide better chip-carrying capacity than four flutes and a finer finish than two, reducing the need for a second finishing cut in some applications. Suitable for high-performance machining on aluminum and other nonferrous materials.

 

CGC Tools CEM116F2 Primate Square Nose End Mill 2 Flute 116 Diameter 316 LOC 1-12 OAL

CGC Tools CEM116F2 Primate Square Nose End Mill, 2 Flute, 1/16″ Diameter, 3/16″ LOC, 1-1/2″ OAL

CGC Tools CEM116F2 Primate Square Nose End Mill, 2 Flute, 1/16″ Diameter, 3/16″ LOC, 1-1/2″ OAL - This weapon of mass production destroy any competition. Extremely versatile in various materials, center cutting, solid sub-micron carbide. Usa, flat, 2 flute, 1/16” diameter, 3/16” length of cut, 1-1/2” overall length. Gmp edge prepped to hone the “ridges” to reduce fracturing during the milling process while greatly increasing tool life and enhancing finish. Highest transverse rupture strength (trs) nano-grain carbide substrate available and completely resharpenable.

 

Niagara Cutter N85950 Carbide Square Nose End Mill Inch Uncoated Bright Finish Roughing and Finishing Cut 30 Degree Helix 3 Flutes 3 Overall Length 0500 Cutting Diameter 0500 Shank Diameter

Niagara Cutter N85950 Carbide Square Nose End Mill, Inch, Uncoated (Bright) Finish, Roughing and Finishing Cut, 30 Degree Helix, 3 Flutes, 3″ Overall Length, 0.500″ Cutting Diameter, 0.500″ Shank Diameter

Niagara Cutter N85950 Carbide Square Nose End Mill, Inch, Uncoated (Bright) Finish, Roughing and Finishing Cut, 30 Degree Helix, 3 Flutes, 3″ Overall Length, 0.500″ Cutting Diameter, 0.500″ Shank Diameter - Center-cutting design allows the end mill to plunge into material like a drill bit while also performing conventional surface milling. Uncoated (bright) tools have no additional surface treatment or coating for use on a broad range of materials. Square nose end mills (also called square end) create sharp, unrounded cuts. Three flutes provide better chip-carrying capacity than four flutes and a finer finish than two, reducing the need for a second finishing cut in some applications. Carbide can run at higher speeds than high-speed steel, resisting abrasion and high cutting temperatures.

 

Hurricane Turning Tools Woodturning Square Nose Scraper High Speed Steel 34 Inches Nose

Hurricane Turning Tools, Woodturning Square Nose Scraper, High Speed Steel, 3/4 Inches Nose

Hurricane Turning Tools, Woodturning Square Nose Scraper, High Speed Steel, 3/4 Inches Nose - In addition to the high quality steel, hurricane turning tools have extra long handles, some as long at 16 inches. Ships ready for you to final sharpen. The handles are made from solid ash. These tools compare with any hss tool on the market and are sold throughout the world. This is the 3/4″ woodturning square nose scraper made from high speed steel. Hurricane turning tools are made in one of the world’s largest turning tool factories. Compare these tools to others that sell for two to three times the price. They are made out of m2 high speed steel for superior edge holding ability and will last 8x longer between sharpenings as compared to carbon steel.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.