19 Coolest Fitting Stainless Steels

 

Flextron FTGC-YC34-18P 18 Flexible Epoxy Coated Gas Line Connector with 1 Outer Diameter and 34 FIP x 34 MIP Fittings Stainless Steel

Flextron FTGC-YC34-18P 18″ Flexible Epoxy Coated Gas Line Connector with 1″ Outer Diameter and 3/4″ FIP x 3/4″ MIP Fittings, Stainless Steel

Flextron FTGC-YC34-18P 18″ Flexible Epoxy Coated Gas Line Connector with 1″ Outer Diameter and 3/4″ FIP x 3/4″ MIP Fittings, Stainless Steel - Please consult the product information for the flow capacity for this part, for natural gas. The design has been tested on strength and it can withstand an internal hydrostatic pressure of 250 psi or 17 mpa without bursting or showing signs of leaks. 6 and ansi z21. The coating gives it extra protection against corrosion when it comes in contact with chemicals that are typically found in households. It has an outer diameter of 1″ and an inner diameter of 3/4″ and is made of stainless steel coated with a yellow epoxy coating along the entire length of the connector. The part is certified by commonwealth of massachusetts, the city of new york and by upc and csa for meeting the amse a112. 24, z21. 75 gas appliances and manufactured homes standards. The connector can handle external temperatures of 800 f. Each connector is 100% tested on leaks before it leaves the factory. 18. This is a flextron gas connector from their yc34 series of connectors, which is designed for indoor and is designed as part of a tank less water heater or -valve kit. Its flared end fittings result in a metal to metal seal, which is tested to be leak free within a tighten torque of 1040 inch-pounds. 69 and z21. The connector is rated for use in the temperature range of -40 f to 150 f and it is certified by csa for use up to a pressure of 0. On the ends of this 18″ long connecter are a 3/4″ fip and a 3/4″ mip fitting, made of zinc-plated stainless steel type s45c. It can also endure up to 30 bends without leaks in water at a depth of maximum 2 inches and withstands 15 twists of 90 degrees, without showing signs of corrosion. 5 psi.

 

Flextron FTGC-SS12-24K 24 Flexible Gas Line Connector with 58 Outer Diameter and 12 x 34 MIP Fittings Stainless Steel

Flextron FTGC-SS12-24K 24″ Flexible Gas Line Connector with 5/8″ Outer Diameter and 1/2″ x 3/4″ MIP Fittings, Stainless Steel

Flextron FTGC-SS12-24K 24″ Flexible Gas Line Connector with 5/8″ Outer Diameter and 1/2″ x 3/4″ MIP Fittings, Stainless Steel - 18. Please consult the product information for the flow capacity for this part, for natural gas. This is a flextron gas connector from their ss12 series of connectors, which is designed for indoor and outdoor use with gas ranges and furnaces. 75 gas appliances and manufactured homes standards. It can also endure up to 30 bends without leaks in water at a depth of maximum 2 inches and withstands 15 twists of 90 degrees, without showing signs of corrosion. The part is certified by commonwealth of massachusetts, the city of new york and by upc and csa for meeting the amse a112. 69 and z21. 24, z21. It has an outer diameter of 5/8″ and an inner diameter of 1/2″ and is made of uncoated stainless steel. 5 psi. 6 and ansi z21. The connector can handle external temperatures of 800 f. The connector is rated for use in the temperature range of -40 f to 150 f and it is certified by csa for use up to a pressure of 0. The design has been tested on strength and it can withstand an internal hydrostatic pressure of 250 psi or 17 mpa without bursting or showing signs of leaks. Its flared end fittings result in a metal to metal seal, which is tested to be leak free within a tighten torque of 1040 inch-pounds. Each connector is 100% tested on leaks before it leaves the factory. On the ends of this 24″ long connecter are a 1/2″ mip and a 3/4″ mip fitting, made of zinc-plated stainless steel type s45c.

 

Flextron FTGC-YC34-36P 36 Flexible Yellow Epoxy Coated Gas Line Connector with 1 Outer Diameter and 34 FIP x 34 MIP Fittings Stainless Steel

Flextron FTGC-YC34-36P 36″ Flexible Yellow Epoxy Coated Gas Line Connector with 1″ Outer Diameter and 3/4″ FIP x 3/4″ MIP Fittings, Stainless Steel

Flextron FTGC-YC34-36P 36″ Flexible Yellow Epoxy Coated Gas Line Connector with 1″ Outer Diameter and 3/4″ FIP x 3/4″ MIP Fittings, Stainless Steel - 6 and ansi z21. The design has been tested on strength and it can withstand an internal hydrostatic pressure of 250 psi or 17 mpa without bursting or showing signs of leaks. The part is certified by commonwealth of massachusetts, the city of new york and by upc and csa for meeting the amse a112. On the ends of this 36″ long connecter are a 3/4″ fip and a 3/4″ mip fitting, made of zinc-plated stainless steel type s45c. 18. This is a flextron gas connector from their yc34 series of connectors, which is designed for indoor and is designed as part of a tank less water heater or -valve kit. 75 gas appliances and manufactured homes standards. Each connector is 100% tested on leaks before it leaves the factory. 24, z21. 5 psi. The connector is rated for use in the temperature range of -40 f to 150 f and it is certified by csa for use up to a pressure of 0. Please consult the product information for the flow capacity for this part, for natural gas. It can also endure up to 30 bends without leaks in water at a depth of maximum 2 inches and withstands 15 twists of 90 degrees, without showing signs of corrosion. The coating gives it extra protection against corrosion when it comes in contact with chemicals that are typically found in households. It has an outer diameter of 1″ and an inner diameter of 3/4″ and is made of stainless steel coated with a yellow epoxy coating along the entire length of the connector. 69 and z21. Its flared end fittings result in a metal to metal seal, which is tested to be leak free within a tighten torque of 1040 inch-pounds. The connector can handle external temperatures of 800 f.

 

SuperWhole 1-14x1Female Nipple Threaded Reducer Pipe Fitting Stainless Steel 304 NPT

SuperWhole 1-1/4″x1″Female Nipple Threaded Reducer Pipe Fitting Stainless Steel 304 NPT

SuperWhole 1-1/4″x1″Female Nipple Threaded Reducer Pipe Fitting Stainless Steel 304 NPT - Shape threaded reducer (female x female ) connectionnpt-npt material 304 stainless steel measurement 1-1/4″x1″ other size is available too,please check it in our store package include 1 piece x 1-1/4″x1″female nipple threaded reducer pipe fitting stainless steel 304 npt.

 

Flextron FTGC-YC12-60M 60 Flexible Yellow Epoxy Coated Gas Line Connector with 58 Outer Diameter and 12 FIP x 34 MIP Fittings Stainless Steel

Flextron FTGC-YC12-60M 60″ Flexible Yellow Epoxy Coated Gas Line Connector with 5/8″ Outer Diameter and 1/2″ FIP x 3/4″ MIP Fittings, Stainless Steel

Flextron FTGC-YC12-60M 60″ Flexible Yellow Epoxy Coated Gas Line Connector with 5/8″ Outer Diameter and 1/2″ FIP x 3/4″ MIP Fittings, Stainless Steel - 5 psi. The design has been tested on strength and it can withstand an internal hydrostatic pressure of 250 psi or 17 mpa without bursting or showing signs of leaks. The part is certified by commonwealth of massachusetts, the city of new york and by upc and csa for meeting the amse a112. The connector is rated for use in the temperature range of -40 f to 150 f and it is certified by csa for use up to a pressure of 0. The coating gives it extra protection against corrosion when it comes in contact with chemicals that are typically found in households. 24, z21. 18. It has an outer diameter of 5/8″ and an inner diameter of 1/2″ and is made of stainless steel coated with a yellow epoxy coating along the entire length of the connector. Please consult the product information for the flow capacity for this part, for natural gas. 69 and z21. The connector can handle external temperatures of 800 f. 75 gas appliances and manufactured homes standards. It can also endure up to 30 bends without leaks in water at a depth of maximum 2 inches and withstands 15 twists of 90 degrees, without showing signs of corrosion. 6 and ansi z21. Each connector is 100% tested on leaks before it leaves the factory. This is a flextron gas connector from their yc12 series of connectors, which is designed for indoor and outdoor use with gas ranges and furnaces. Its flared end fittings result in a metal to metal seal, which is tested to be leak free within a tighten torque of 1040 inch-pounds. On the ends of this 60″ long connecter are a 1/2″ fip and a 3/4″ mip fitting, made of zinc-plated stainless steel type s45c.

 

Flextron FTGC-SS12-72A 72 Flexible Gas Line Connector with 58 Outer Diameter and 12 x 12 MIP Fittings Stainless Steel

Flextron FTGC-SS12-72A 72″ Flexible Gas Line Connector with 5/8″ Outer Diameter and 1/2″ x 1/2″ MIP Fittings, Stainless Steel

Flextron FTGC-SS12-72A 72″ Flexible Gas Line Connector with 5/8″ Outer Diameter and 1/2″ x 1/2″ MIP Fittings, Stainless Steel - 24, z21. It can also endure up to 30 bends without leaks in water at a depth of maximum 2 inches and withstands 15 twists of 90 degrees, without showing signs of corrosion. The connector can handle external temperatures of 800 f. 18. The part is certified by commonwealth of massachusetts, the city of new york and by upc and csa for meeting the amse a112. Please consult the product information for the flow capacity for this part, for natural gas. It has an outer diameter of 5/8″ and an inner diameter of 1/2″ and is made of uncoated stainless steel. 6 and ansi z21. The connector is rated for use in the temperature range of -40 f to 150 f and it is certified by csa for use up to a pressure of 0. . 69 and z21. Each connector is 100% tested on leaks before it leaves the factory. 75 gas appliances and manufactured homes standards. 5 psi. This is a flextron gas connector from their ss12 series of connectors, which is designed for indoor and outdoor use with gas ranges and furnaces. The design has been tested on strength and it can withstand an internal hydrostatic pressure of 250 psi or 17 mpa without bursting or showing signs of leaks. On the ends of this 72″ long connecter are two 1/2″ mip fittings, made of zinc-plated stainless steel type s45c. Its flared end fittings result in a metal to metal seal, which is tested to be leak free within a tighten torque of 1040 inch-pounds.

 

12 Female x 12 Male Nipple Bush Adapter Bushing Pipe Fittings NPT Stainless Steel 304

1/2″ Female x 1/2″ Male Nipple Bush Adapter, Bushing Pipe Fittings, NPT Stainless Steel 304

1/2″ Female x 1/2″ Male Nipple Bush Adapter, Bushing Pipe Fittings, NPT Stainless Steel 304 - Pipe nipple for custom-made parts, pipes fittings connector, such as used for water pipe, oil pipe, air pipe and so on. Shapefemale to male,connectionnpt-npt. 100% brand new and high quality. Maximum operating pressure rating of 250 psi at 70 degrees f ambient temperature. Stainless steel 304 for resistance to corrosion and high temperatures.

 

SuperWhole 2X1-12X2 Female Tee Threaded Reducer Pipe Fitting Stainless Steel 304 NPT

SuperWhole 2″X1-1/2″X2″ Female Tee Threaded Reducer Pipe Fitting Stainless Steel 304 NPT

SuperWhole 2″X1-1/2″X2″ Female Tee Threaded Reducer Pipe Fitting Stainless Steel 304 NPT - Material 304 stainless steel. Connectionnpt-npt-nptmeasurement 2″x1-1/2″x2″. Other size is available too,please check it in our store. Package include1 piece x 2″x1-1/2″x2″ female tee threaded reducer pipe fitting stainless steel 304 npt. Shape tee threaded reducer (female x female x female ).

 

Ham-Let Stainless Steel 316 Let-Lok Compression Fitting Nut 12 Tube OD

Ham-Let Stainless Steel 316 Let-Lok Compression Fitting, Nut, 1/2″ Tube OD

Ham-Let Stainless Steel 316 Let-Lok Compression Fitting, Nut, 1/2″ Tube OD - Meets astm a213 and a269 standards for quality assurance. Connects to a tube or tube fitting. Stainless steel 316 for higher strength and greater corrosion resistance than stainless steel 304. Nut for connecting to a compression tube fitting. Maximum operating temperature range of -100 to +1,000 degrees f.

 

Flextron FTGC-YC12-72M 72 Flexible Yellow Epoxy Coated Gas Line Connector with 58 Outer Diameter and 12 FIP x 34 MIP Fittings Stainless Steel

Flextron FTGC-YC12-72M 72″ Flexible Yellow Epoxy Coated Gas Line Connector with 5/8″ Outer Diameter and 1/2″ FIP x 3/4″ MIP Fittings, Stainless Steel

Flextron FTGC-YC12-72M 72″ Flexible Yellow Epoxy Coated Gas Line Connector with 5/8″ Outer Diameter and 1/2″ FIP x 3/4″ MIP Fittings, Stainless Steel - 18. 69 and z21. Each connector is 100% tested on leaks before it leaves the factory. 24, z21. 5 psi. This is a flextron gas connector from their yc12 series of connectors, which is designed for indoor and outdoor use with gas ranges and furnaces. The connector is rated for use in the temperature range of -40 f to 150 f and it is certified by csa for use up to a pressure of 0. It can also endure up to 30 bends without leaks in water at a depth of maximum 2 inches and withstands 15 twists of 90 degrees, without showing signs of corrosion. The connector can handle external temperatures of 800 f. The design has been tested on strength and it can withstand an internal hydrostatic pressure of 250 psi or 17 mpa without bursting or showing signs of leaks. On the ends of this 72″ long connecter are a 1/2″ fip and a 3/4″ mip fitting, made of zinc-plated stainless steel type s45c. Its flared end fittings result in a metal to metal seal, which is tested to be leak free within a tighten torque of 1040 inch-pounds. It has an outer diameter of 5/8″ and an inner diameter of 1/2″ and is made of stainless steel coated with a yellow epoxy coating along the entire length of the connector. The part is certified by commonwealth of massachusetts, the city of new york and by upc and csa for meeting the amse a112. The coating gives it extra protection against corrosion when it comes in contact with chemicals that are typically found in households. 6 and ansi z21. Please consult the product information for the flow capacity for this part, for natural gas. 75 gas appliances and manufactured homes standards.

 

12 Female x Female Threaded Pipe Fitting Stainless Steel SS304 NPT NEW

1/2″ Female x Female Threaded Pipe Fitting Stainless Steel SS304 NPT NEW

1/2″ Female x Female Threaded Pipe Fitting Stainless Steel SS304 NPT NEW - Features shape threaded pipe fitting (female x female ) connectionnpt-npt material 304 stainless steel measurement 1/2″ measure length 1/4″ 26mm 3/8″ 26mm 1/2″ 29mm 3/4″ 31mm 1″ 36mm 1-1/4″ 40mm 1-1/2″ 41mm 2″ 44mm package include 1 piece x female x female threaded pipe fitting stainless steel ss304 npt new.

 

Flextron FTGC-YC12-12P 12 Flexible Yellow Epoxy Coated Gas Line Connector with 58 Outer Diameter and 34 FIP x 34 MIP Fittings Stainless Steel

Flextron FTGC-YC12-12P 12″ Flexible Yellow Epoxy Coated Gas Line Connector with 5/8″ Outer Diameter and 3/4″ FIP x 3/4″ MIP Fittings, Stainless Steel

Flextron FTGC-YC12-12P 12″ Flexible Yellow Epoxy Coated Gas Line Connector with 5/8″ Outer Diameter and 3/4″ FIP x 3/4″ MIP Fittings, Stainless Steel - It has an outer diameter of 5/8″ and an inner diameter of 1/2″ and is made of stainless steel coated with a yellow epoxy coating along the entire length of the connector. The coating gives it extra protection against corrosion when it comes in contact with chemicals that are typically found in households. 18. The design has been tested on strength and it can withstand an internal hydrostatic pressure of 250 psi or 17 mpa without bursting or showing signs of leaks. 24, z21. Each connector is 100% tested on leaks before it leaves the factory. It can also endure up to 30 bends without leaks in water at a depth of maximum 2 inches and withstands 15 twists of 90 degrees, without showing signs of corrosion. 69 and z21. 6 and ansi z21. The connector is rated for use in the temperature range of -40 f to 150 f and it is certified by csa for use up to a pressure of 0. 5 psi. 75 gas appliances and manufactured homes standards. On the ends of this 12″ long connecter are a 3/4″ fip and a 3/4″ mip fitting, made of zinc-plated stainless steel type s45c. Its flared end fittings result in a metal to metal seal, which is tested to be leak free within a tighten torque of 1040 inch-pounds. This is a flextron gas connector from their yc12 series of connectors, which is designed for indoor and outdoor use with gas ranges and furnaces. Please consult the product information for the flow capacity for this part, for natural gas. The part is certified by commonwealth of massachusetts, the city of new york and by upc and csa for meeting the amse a112. The connector can handle external temperatures of 800 f.

 

Flextron FTGC-YC12-18C 18 Flexible Yellow Epoxy Coated Gas Line Connector with 58 Outer Diameter and 12 FIP x 12 MIP Fittings Stainless Steel

Flextron FTGC-YC12-18C 18″ Flexible Yellow Epoxy Coated Gas Line Connector with 5/8″ Outer Diameter and 1/2″ FIP x 1/2″ MIP Fittings, Stainless Steel

Flextron FTGC-YC12-18C 18″ Flexible Yellow Epoxy Coated Gas Line Connector with 5/8″ Outer Diameter and 1/2″ FIP x 1/2″ MIP Fittings, Stainless Steel - 5 psi. 75 gas appliances and manufactured homes standards. 24, z21. This is a flextron gas connector from their yc12 series of connectors, which is designed for indoor and outdoor use with gas ranges and furnaces. The connector is rated for use in the temperature range of -40 f to 150 f and it is certified by csa for use up to a pressure of 0. 6 and ansi z21. It has an outer diameter of 5/8″ and an inner diameter of 1/2″ and is made of stainless steel coated with a yellow epoxy coating along the entire length of the connector. The design has been tested on strength and it can withstand an internal hydrostatic pressure of 250 psi or 17 mpa without bursting or showing signs of leaks. Each connector is 100% tested on leaks before it leaves the factory. 69 and z21. The coating gives it extra protection against corrosion when it comes in contact with chemicals that are typically found in households. The connector can handle external temperatures of 800 f. It can also endure up to 30 bends without leaks in water at a depth of maximum 2 inches and withstands 15 twists of 90 degrees, without showing signs of corrosion. Its flared end fittings result in a metal to metal seal, which is tested to be leak free within a tighten torque of 1040 inch-pounds. The part is certified by commonwealth of massachusetts, the city of new york and by upc and csa for meeting the amse a112. 18. Please consult the product information for the flow capacity for this part, for natural gas. On the ends of this 18″ long connecter are a 1/2″ fip and a 1/2″ mip fitting, made of zinc-plated stainless steel type s45c.

 

Flextron FTGC-SS38-72H 72 Flexible Gas Line Connector with 12 Outer Diameter and 38 Fip x 38 Fip Fittings Stainless Steel

Flextron FTGC-SS38-72H 72″ Flexible Gas Line Connector with 1/2″ Outer Diameter and 3/8″ Fip x 3/8″ Fip Fittings, Stainless Steel

Flextron FTGC-SS38-72H 72″ Flexible Gas Line Connector with 1/2″ Outer Diameter and 3/8″ Fip x 3/8″ Fip Fittings, Stainless Steel - 5 psi. 75 gas appliances and manufactured homes standards. Each connector is 100% tested on leaks before it leaves the factory. The design has been tested on strength and it can withstand an internal hydrostatic pressure of 250 psi or 17 mpa without bursting or showing signs of leaks. 24, z21. 18. The part is certified by commonwealth of massachusetts, the city of new york and by upc and csa for meeting the amse a112. The connector can handle external temperatures of 800 f. Its flared end fittings result in a metal to metal seal, which is tested to be leak free within a tighten torque of 1040 inch-pounds. On the ends of this 72″ long connecter are two 3/8″ fip fittings, made of zinc-plated stainless steel type s45c. It can also endure up to 30 bends without leaks in water at a depth of maximum 2 inches and withstands 15 twists of 90 degrees, without showing signs of corrosion. The connector is rated for use in the temperature range of -40 f to 150 f and it is certified by csa for use up to a pressure of 0. 69 and z21. This is a flextron gas connector from their ss38 series of connectors, which is designed for indoor and outdoor use with gas dryers and water heaters. Please consult the product information for the flow capacity for this part, for natural gas. It has an outer diameter of 1/2″ and an inner diameter of 3/8″ and is made of uncoated stainless steel. 6 and ansi z21.

 

Flextron FTGC-YC34-24P 24 Flexible Yellow Epoxy Coated Gas Line Connector with 1 Outer Diameter and 34 FIP x 34 MIP Fittings Stainless Steel

Flextron FTGC-YC34-24P 24″ Flexible Yellow Epoxy Coated Gas Line Connector with 1″ Outer Diameter and 3/4″ FIP x 3/4″ MIP Fittings, Stainless Steel

Flextron FTGC-YC34-24P 24″ Flexible Yellow Epoxy Coated Gas Line Connector with 1″ Outer Diameter and 3/4″ FIP x 3/4″ MIP Fittings, Stainless Steel - It has an outer diameter of 1″ and an inner diameter of 3/4″ and is made of stainless steel coated with a yellow epoxy coating along the entire length of the connector. 18. Please consult the product information for the flow capacity for this part, for natural gas. Its flared end fittings result in a metal to metal seal, which is tested to be leak free within a tighten torque of 1040 inch-pounds. It can also endure up to 30 bends without leaks in water at a depth of maximum 2 inches and withstands 15 twists of 90 degrees, without showing signs of corrosion. The part is certified by commonwealth of massachusetts, the city of new york and by upc and csa for meeting the amse a112. 6 and ansi z21. 5 psi. On the ends of this 24″ long connecter are a 3/4″ fip and a 3/4″ mip fitting, made of zinc-plated stainless steel type s45c. This is a flextron gas connector from their yc34 series of connectors, which is designed for indoor and is designed as part of a tank less water heater or -valve kit. 69 and z21. The design has been tested on strength and it can withstand an internal hydrostatic pressure of 250 psi or 17 mpa without bursting or showing signs of leaks. Each connector is 100% tested on leaks before it leaves the factory. The connector can handle external temperatures of 800 f. 75 gas appliances and manufactured homes standards. 24, z21. The connector is rated for use in the temperature range of -40 f to 150 f and it is certified by csa for use up to a pressure of 0. The coating gives it extra protection against corrosion when it comes in contact with chemicals that are typically found in households.

 

Everflow Supplies SSCPM112-NL 1-12 Lead Free Transition Fitting with a Stainless Steel Male Threaded and with a CPVC Connection

Everflow Supplies SSCPM112-NL 1-1/2″ Lead Free Transition Fitting with a Stainless Steel Male Threaded and with a CPVC Connection

Everflow Supplies SSCPM112-NL 1-1/2″ Lead Free Transition Fitting with a Stainless Steel Male Threaded and with a CPVC Connection - Moreover, being approved by upc, this is a lead free product, which makes it useable in potable water applications. . In particular, this fitting has on one end a 1-1/2″ male threaded connect, which is made of stainless steel, and on the other end a 1-1/2″ cpvc connect, in which the pipe can be welded with cpvc cement. This is an ever flow supplies transition fitting for connecting a cpvc pipe and a pipe with threaded ends.

 

Everflow Supplies SSCPM200-NL 2 Lead Free Transition Fitting with a Stainless Steel Male Threaded and with a CPVC Connection

Everflow Supplies SSCPM200-NL 2″ Lead Free Transition Fitting with a Stainless Steel Male Threaded and with a CPVC Connection

Everflow Supplies SSCPM200-NL 2″ Lead Free Transition Fitting with a Stainless Steel Male Threaded and with a CPVC Connection - Moreover, being approved by upc, this is a lead free product, which makes it useable in potable water applications. This is an ever flow supplies transition fitting for connecting a cpvc pipe and a pipe with threaded ends. In particular, this fitting has on one end a 2 inch male threaded connect, which is made of stainless steel, and on the other end a 2 inch cpvc connect, in which the pipe can be welded with cpvc cement. .

 

SuperWhole 14 Male x 14Male Threaded Pipe Fitting 200MM DN8 Stainless Steel SS304 NPT

SuperWhole 1/4″ Male x 1/4″Male Threaded Pipe Fitting 200MM DN8 Stainless Steel SS304 NPT

SuperWhole 1/4″ Male x 1/4″Male Threaded Pipe Fitting 200MM DN8 Stainless Steel SS304 NPT - Features shape threaded pipe (male x male) size1/4″x1/4″ connectionnpt-npt material 304 stainless steel length200mm package include 1 piece x male x male threaded pipe fitting stainless steel ss304 npt new.

 

Diameter 51 OD 51mm 2 3 Way Tee Sanitary Ferrule Pipe Fitting Stainless Steel 304

Diameter 51 OD 51mm 2″ 3 Way Tee Sanitary Ferrule Pipe Fitting Stainless Steel 304

Diameter 51 OD 51mm 2″ 3 Way Tee Sanitary Ferrule Pipe Fitting Stainless Steel 304 - Features brand new body materialstainless steel 304 high pressure durable pipe od51mm 2″ ferrule size 64mm fits 2. 5″ ferrule tri clamp package included 1 piece x diameter 51 od 51mm 2″ 3 way tee sanitary ferrule pipe fitting stainless steel 304.