19 Top Machine Screws

 

Hard-to-Find Fastener 014973174026 Phillips Machine Screws 15 Piece 6-32 x 2-12 Black

Hard-to-Find Fastener 014973174026 Phillips Machine Screws (15 Piece), 6-32 x 2-1/2″, Black

Hard-to-Find Fastener 014973174026 Phillips Machine Screws (15 Piece), 6-32 x 2-1/2″, Black - We stock many grades of fasteners ranging from low carbon steel on up to hardened, heat treated steel. Most of our fasteners have a light zinc plating over steel giving a more rust resistant finish. We stock a wide variety of fasteners ideal for many applications around the home, farm, business, automotive, and in industry. We also sell coated and stainless products for additional rust resistance. Not all fasteners are applicable for all applications so be certain to test thoroughly and get the opinion of a licensed builder or certified building or structural engineer before relying on these fasteners for any situations where failure would result in damage to property or person.

 

The Hillman Group 92046 4-40-Inch x 1-Inch Pan Head Phillips Machine Screw 100-Pack

The Hillman Group 92046 4-40-Inch x 1-Inch Pan Head Phillips Machine Screw, 100-Pack

The Hillman Group 92046 4-40-Inch x 1-Inch Pan Head Phillips Machine Screw, 100-Pack - If nuts are needed, use with nuts of the same finish and threading for proper fit. Machine screws are used with nuts or screwed directly into a threaded receptacle to fasten metal parts together. Measured from the underside of the head to the tip of the screw to obtain fastener length. .

 

Swordfish 32171 Machine Screw Assortment 363 Piece

Swordfish 32171 Machine Screw Assortment, 363 Piece

Swordfish 32171 Machine Screw Assortment, 363 Piece - Nylon lock nuts and hex key wrenches. An excellent assortment of machine screws, flat washers, lock washers. Organized in a pp storage case with chart inside box lid for quick identification. A good kit for home furniture installation or repair. Black oxide finish for extra strength.

 

Steel Pan Head Machine Screw Zinc Plated Meets JIS B1111 2 Phillips Drive M4-07 Thread Size 35 mm Length Fully Threaded Imported Pack of 25

Steel Pan Head Machine Screw, Zinc Plated, Meets JIS B1111, #2 Phillips Drive, M4-0.7 Thread Size, 35 mm Length, Fully Threaded, Imported (Pack of 25)

Steel Pan Head Machine Screw, Zinc Plated, Meets JIS B1111, #2 Phillips Drive, M4-0.7 Thread Size, 35 mm Length, Fully Threaded, Imported (Pack of 25) - Thread style fully thread head size 56mm x 25mm / 022″ x 01″ (d t). Head style pan head material 316 stainless steel package content 50(+/-2%) x phillips pan head machine screws. Product name phillips pan head machine screw thread size m3 x 10mm / 012″ x 04″ (d l) weight 39g. Main color silver tone thread pitch 05mm total length 125mm / 049″. Bit driver size 32mm / 013″ drive type phillips fastener type machine screw.

 

Hard-to-Find Fastener 014973203580 Stainless Phillips Truss Machine Screws 30 Piece 6-32 x 14

Hard-to-Find Fastener 014973203580 Stainless Phillips Truss Machine Screws (30 Piece), 6-32 x 1/4″

Hard-to-Find Fastener 014973203580 Stainless Phillips Truss Machine Screws (30 Piece), 6-32 x 1/4″ - We also sell coated and stainless products for additional rust resistance. Most of our fasteners have a light zinc plating over steel giving a more rust resistant finish. We stock many grades of fasteners ranging from low carbon steel on up to hardened, heat treated steel. We stock a wide variety of fasteners ideal for many applications around the home, farm, business, automotive, and in industry. Not all fasteners are applicable for all applications so be certain to test thoroughly and get the opinion of a licensed builder or certified building or structural engineer before relying on these fasteners for any situations where failure would result in damage to property or person.

 

Nylon 66 Small Pattern Machine Screw Hex Nut Black 2-56 Thread Size 316 Width Across Flats 116 Thick Pack of 100

Nylon 6/6 Small Pattern Machine Screw Hex Nut, Black, #2-56 Thread Size, 3/16″ Width Across Flats, 1/16″ Thick (Pack of 100)

Nylon 6/6 Small Pattern Machine Screw Hex Nut, Black, #2-56 Thread Size, 3/16″ Width Across Flats, 1/16″ Thick (Pack of 100) - Several different nut styles fit a variety of application and installation requirements. The material is a strong yet lightweight plastic and is nonconductive. The nut has a small pattern design, meaning it is narrower than a standard machine screw hex nut for use in areas with limited space. Others, such as eye nuts, thumb nuts, and wing nuts, can be tightened by hand. Some styles, such as hex nuts, acorn nuts, flange nuts, and coupling nuts, must be tightened with a tool. It has six flat sides that a wrench can grip to turn from the side, enabling use when there is no space above the nut. Some nuts have a self-locking mechanism, such as a nylon patch or distorted threads, that makes them suitable for applications with a high amount of vibration. The nylon 6/6 small pattern machine screw hex nut has a black color. Nuts are internally threaded fasteners that are used with bolts and threaded rods and studs to connect components. Nylon 6/6 can either absorb or lose moisture, which may alter its dimensions and mechanical properties. Nylon 6/6 provides resistance to abrasion, corrosion, and many chemicals and solvents.

 

The Hillman Group 90123 6-32-Inch x 12-Inch Round Head Combo Machine Screw 100-Pack

The Hillman Group 90123 6-32-Inch x 1/2-Inch Round Head Combo Machine Screw, 100-Pack

The Hillman Group 90123 6-32-Inch x 1/2-Inch Round Head Combo Machine Screw, 100-Pack - . If nuts are needed, use with nuts of the same finish and threading for proper fit. Measured from the underside of the head to the tip of the screw to obtain fastener length. Machine screws are used with nuts or screwed directly into a threaded receptacle to fasten metal parts together.

 

Steel Pan Head Machine Screw Black Oxide Finish Meets ASME B1863 1 Phillips Drive 4-40 Thread Size 12 Length Fully Threaded Import Pack of 100

Steel Pan Head Machine Screw, Black Oxide Finish, Meets ASME B18.6.3, #1 Phillips Drive, #4-40 Thread Size, 1/2″ Length, Fully Threaded, Import (Pack of 100)

Steel Pan Head Machine Screw, Black Oxide Finish, Meets ASME B18.6.3, #1 Phillips Drive, #4-40 Thread Size, 1/2″ Length, Fully Threaded, Import (Pack of 100) - They are available with a variety of head shapes, which determine how the screw interacts with the mating surface, and drive styles, which determine the type of driver required to install and remove the screw. Machine screws are threaded fasteners that are typically used with nuts or drilled and tapped (threaded) holes. .

 

8-32 x 1-58 KnobPull Machine Screws 24 per Pack

8-32 x 1-5/8″ Knob/Pull Machine Screws (24 per Pack)

8-32 x 1-5/8″ Knob/Pull Machine Screws (24 per Pack) - Truss head design has a flatter profile than a regular round head screw. Use for drawer front knobs and pulls. Different length screws used for installing pulls and knobs.

 

The Hillman Group 140009 Zinc Hex Machine Screw Nut 4-40 Pack of 100

The Hillman Group 140009 Zinc Hex Machine Screw Nut, 4-40, Pack of 100

The Hillman Group 140009 Zinc Hex Machine Screw Nut, 4-40, Pack of 100 - Machine screw nuts are designed to be used with machine screws. Hex machine screw nuts are used for fastening to a bolt when mechanically joining materials together. This type refers to nuts used with smaller machine screw sizes under 1/4″.

 

Hard-to-Find Fastener 014973199524 Phillips Pan Machine Screws 8-32 x 3-Inch 25-Piece

Hard-to-Find Fastener 014973199524 Phillips Pan Machine Screws, 8-32 x 3-Inch, 25-Piece

Hard-to-Find Fastener 014973199524 Phillips Pan Machine Screws, 8-32 x 3-Inch, 25-Piece - Not all fasteners are applicable for all applications so be certain to test thouroughly and get the opinion of a licensed building or certified building or structural engineer before relying on these fasteners for any situations where failure would result in damage to property or person. We also sell coated and stainless products for additional rust resistance. Most of our fasteners have a light zinc plating over steel giving a more rust resistant finsh. We stock many grades of fasteners ranging from low carbon steel on up to hardened, heat treated steel. . We stock a wide variety of fasteners ideal for many applications arround the home, farm, business, automotives, and in industry.

 

uxcell M3x10mm 316 Stainless Steel Phillips Pan Head Machine Screws Fasteners 50 Pcs

uxcell M3x10mm 316 Stainless Steel Phillips Pan Head Machine Screws Fasteners 50 Pcs

uxcell M3x10mm 316 Stainless Steel Phillips Pan Head Machine Screws Fasteners 50 Pcs - Main color silver tone thread pitch 05mm total length 125mm / 049″. Thread style fully thread head size 56mm x 25mm / 022″ x 01″ (d t). Bit driver size 32mm / 013″ drive type phillips fastener type machine screw. Head style pan head material 316 stainless steel package content 50(+/-2%) x phillips pan head machine screws. Product name phillips pan head machine screw thread size m3 x 10mm / 012″ x 04″ (d l) weight 39g.

 

Steel Machine Screw Zinc Plated Finish Flat Head Phillips Drive 38 Length 2-56 Threads Pack of 100

Steel Machine Screw, Zinc Plated Finish, Flat Head, Phillips Drive, 3/8″ Length, #2-56 Threads (Pack of 100)

Steel Machine Screw, Zinc Plated Finish, Flat Head, Phillips Drive, 3/8″ Length, #2-56 Threads (Pack of 100) - Zinc plating resists corrosion resistance and has a reflective appearance. Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening. Flat head is cone shaped for use in countersunk holes and has a flat top that fits flush with the mated surface. Steel is often used in applications where strength is the primary consideration.

 

Hard-to-Find Fastener 014973174071 Phillips Machine Screws 20 Piece 8-32 x 1-14 Black

Hard-to-Find Fastener 014973174071 Phillips Machine Screws (20 Piece), 8-32 x 1-1/4″, Black

Hard-to-Find Fastener 014973174071 Phillips Machine Screws (20 Piece), 8-32 x 1-1/4″, Black - We stock many grades of fasteners ranging from low carbon steel on up to hardened, heat treated steel. Most of our fasteners have a light zinc plating over steel giving a more rust resistant finish. Not all fasteners are applicable for all applications so be certain to test thoroughly and get the opinion of a licensed builder or certified building or structural engineer before relying on these fasteners for any situations where failure would result in damage to property or person. We also sell coated and stainless products for additional rust resistance. We stock a wide variety of fasteners ideal for many applications around the home, farm, business, automotive, and in industry.

 

Steel Machine Screw Zinc Plated Finish Pan Head Phillips Drive Meets DIN 7985 45mm Length Fully Threaded M8-125 Metric Coarse Threads Pack of 5

Steel Machine Screw, Zinc Plated Finish, Pan Head, Phillips Drive, Meets DIN 7985, 45mm Length, Fully Threaded, M8-1.25 Metric Coarse Threads (Pack of 5)

Steel Machine Screw, Zinc Plated Finish, Pan Head, Phillips Drive, Meets DIN 7985, 45mm Length, Fully Threaded, M8-1.25 Metric Coarse Threads (Pack of 5) - Steel is often used in applications where strength is the primary consideration. Zinc plating resists corrosion resistance and has a reflective appearance. Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening. Meets din 7985 specifications. Pan head has a flat top and short vertical sides with a rounded top edge.

 

The Hillman Group 111730  1 8-32 x 1-34-Inch Truss Combo Head Machine Screw 100-Pack

The Hillman Group 111730 1 8-32 x 1-3/4-Inch Truss Combo Head Machine Screw, 100-Pack

The Hillman Group 111730 1 8-32 x 1-3/4-Inch Truss Combo Head Machine Screw, 100-Pack - Machine screws are used with nuts or screwed directly into a threaded receptacle to fasten metal parts together. . If nuts are needed, use with nuts of the same finish and threading for proper fit. Measured from the underside of the head to the tip of the screw to obtain fastener length.

 

The Hillman Group 90413 14-20-Inch x 2-12-Inch Round Head Combo Machine Screw 100-Pack

The Hillman Group 90413 1/4-20-Inch x 2-1/2-Inch Round Head Combo Machine Screw, 100-Pack

The Hillman Group 90413 1/4-20-Inch x 2-1/2-Inch Round Head Combo Machine Screw, 100-Pack - Measured from the underside of the head to the tip of the screw to obtain fastener length. If nuts are needed, use with nuts of the same finish and threading for proper fit. Machine screws are used with nuts or screwed directly into a threaded receptacle to fasten metal parts together.

 

The Hillman Group 92174 10-24-Inch x 2-12-Inch Pan Head Phillips Machine Screw 100-Pack

The Hillman Group 92174 10-24-Inch x 2-1/2-Inch Pan Head Phillips Machine Screw, 100-Pack

The Hillman Group 92174 10-24-Inch x 2-1/2-Inch Pan Head Phillips Machine Screw, 100-Pack - . Measured from the underside of the head to the tip of the screw to obtain fastener length. If nuts are needed, use with nuts of the same finish and threading for proper fit. Machine screws are used with nuts or screwed directly into a threaded receptacle to fasten metal parts together.

 

Cosmas Cabinet Hardware 753218 1-12 Length Truss Head Machine Screw with Philips  Slotted Drive - 1-12 Inch Long - UNC 8-32 - 30 Pack

Cosmas® Cabinet Hardware 753218 1-1/2″ Length Truss Head Machine Screw with Philips / Slotted Drive – 1-1/2 Inch Long – UNC 8-32 – 30 Pack

Cosmas® Cabinet Hardware 753218 1-1/2″ Length Truss Head Machine Screw with Philips / Slotted Drive – 1-1/2 Inch Long – UNC 8-32 – 30 Pack - Screw length 1-1/2″. This listing is for a package of 30 screws. Works with all cosmas® cabinet hardware. Unc 8-32 — unf 8-36.