20 Top Dry Core Bits

 

Concut Inc MBD BLOCK-2 2-Inch Premium Dry Core Bit

Concut Inc MBD BLOCK-2 2-Inch Premium Dry Core Bit

Concut Inc MBD BLOCK-2 2-Inch Premium Dry Core Bit - For use on right angle grinders or hand held drills. Unique core cut outs and spiral barrel design remove dust quickly. Allows for fast drilling in concrete block.

 

DRY Type 3 Diamond DRY Coring Bit - Concrete Core Drill by BLUEROCK  Tools

DRY Type 3″ Diamond DRY Coring Bit – Concrete Core Drill by BLUEROCK ® Tools

DRY Type 3″ Diamond DRY Coring Bit – Concrete Core Drill by BLUEROCK ® Tools - It’s a high quality bit that’s made to last. . The overall length is 11″ with the inside measuring around 10″ in depth. Thanks for the interest. It’s designed to drill through concrete, masonry, assorted brick and block as well as other types of rock. If you have any questions, please feel free to contact us. New, dry type 3″ bluerock tools diamond coring bit for core drill, new this is a brand new “dry” type concrete coring bit. It uses the standard 5/8″ 11 unc threads used by most concrete core drills.

 

Alpha Dry Core Bit 12

Alpha Dry Core Bit 1/2″

Alpha Dry Core Bit 1/2″ - Not only is this convenient but it also increases productivity by cutting down on the amount of clean up needed when using water. The alpha® dry core bit provides the best cutting performance and can drill through the toughest 1-1/4″ granite or engineered stone countertop at the job site without using water. Dry core bits high-speed dry core bit for granite/eng. Available in 1/2″, 3/4″, 1″, 1-1/4″, 1-3/8″, 1-1/2″ and 2″ sizes. Choose the alpha® dry core drill bit where the convenience of dry application is essential. Stone alpha professional tools® introduces a dry core bit designed for use on the job site without using water. Our dry core bits fit on a high-speed angle grinder with a 5/8″ -11 spindle.

 

Steel Dragon Tools 8 Dry Laser Welded Diamond Core Concrete Drill Bit fits Hilti Milwaukee Rigs

Steel Dragon Tools 8″ Dry Laser Welded Diamond Core Concrete Drill Bit fits Hilti Milwaukee Rigs

Steel Dragon Tools 8″ Dry Laser Welded Diamond Core Concrete Drill Bit fits Hilti Milwaukee Rigs - Laser-welded diamond dry core bitspindle thread 1 1/4″, 77. Diam. 393″)1 year warranty against manufacture defect. X 15. 95″ outer. 5″ barrel heightextra tall 10mm segment height (. Steel dragon tools® 8″ dry laser welded diamond core concrete drill bit fits hilti® milwaukee® rigsuse for dry drilling on a full range of materials from reinforced concrete, asphalt, block, pavement, brick, etc.

 

Falcon Diamond 25 Dry Core Bit

Falcon Diamond 2.5″ Dry Core Bit

Falcon Diamond 2.5″ Dry Core Bit - Falcon diamond’s line of dry core bits offers a vented tube to keep the bit cool while drilling dry. Dry core bits are only intended to drill dry through soft brick or block. All dry core bits have 9″ drilling depth allowing it to drill through a standard 8″ masonry block wall.

 

Steel Dragon Tools 15 Dry Laser Welded Diamond Core Concrete Drill Bit fits Hilti Milwaukee Rigs

Steel Dragon Tools 1.5″ Dry Laser Welded Diamond Core Concrete Drill Bit fits Hilti Milwaukee Rigs

Steel Dragon Tools 1.5″ Dry Laser Welded Diamond Core Concrete Drill Bit fits Hilti Milwaukee Rigs - Diam. Laser-welded diamond dry core bitspindle thread 1 1/4″, 71. 5″ barrel heightextra tall 10mm segment height (. Steel dragon tools® 1. X 15. 393″)1 year warranty against manufacture defect. 5″ dry laser welded diamond core concrete drill bit fits hilti® milwaukee® rigsuse for dry drilling on a full range of materials from reinforced concrete, asphalt, block, pavement, brick, etc. 51″ outer.

 

Professional Core Bit wDiamond Side Protection - Wet or Dry for cutting Granite and other Natural Stones  Broca para cortar Granito

Professional Core Bit w/Diamond Side Protection – Wet or Dry for cutting Granite and other Natural Stones / Broca para cortar Granito

Professional Core Bit w/Diamond Side Protection – Wet or Dry for cutting Granite and other Natural Stones / Broca para cortar Granito - Diamond core bits are designed with premium grade diamonds for superior cutting performance and longevity. Wet or dry core bit for granite & other natural stone with diamond side protection. Fast coring and long lasting diamond core bits are used for core drilling concrete, green concrete, brick, hard brick, clay pavers, pavers, asphalt and field stones. Core bits are engineered with special barrel vents to allow easy removal of cutting debris. Diamond core drill bits come laser welded.

 

Concut Inc MBD BLOCK-3 3-Inch Premium Dry Core Bit

Concut Inc MBD BLOCK-3 3-Inch Premium Dry Core Bit

Concut Inc MBD BLOCK-3 3-Inch Premium Dry Core Bit - For use on right angle grinders or hand held drills. Unique core cut outs and spiral barrel design remove dust quickly. Allows for fast drilling in concrete block.

 

MK Diamond 158669 3-12-Inch Dry Premium Grade Core Bits For Masonry

MK Diamond 158669 3-1/2-Inch Dry Premium Grade Core Bits For Masonry

MK Diamond 158669 3-1/2-Inch Dry Premium Grade Core Bits For Masonry - Measures 3-1/2 inches diameter. They feature laser-welded technology and inventive bar-slot cooling to promote efficiency, reliability and safety. Dry premium core bits are specifically designed to tackle a variety of soft brick and concrete block drilling operations. Dry cutting bits are 10-inch in length, come with standard 5/8-inch, 11 threaded nuts and easily attach to most hand-held drills. Dry premium core bits are design to tackle soft brick and concrete block drilling operations. Bits are 10 inch length, standard 5/8-11 threaded nuts and easily attach to most hand-held drills. Measures 3-1/2-inch diameter. Laser-welded technology and inventive bar-slot cooling to promote reliability and safety. Available in 6000 maximum/700 minimum rpm.

 

34 Turbo Rim Diamond Core Drill Bit - Wet or Dry - for Marble Granite Ceramic Porcelain Tile  Broca para Granito Marmol

3/4″ Turbo Rim Diamond Core Drill Bit – Wet or Dry – for Marble, Granite, Ceramic, Porcelain, Tile / Broca para Granito & Marmol

3/4″ Turbo Rim Diamond Core Drill Bit – Wet or Dry – for Marble, Granite, Ceramic, Porcelain, Tile / Broca para Granito & Marmol - Our core bit is manufactured for drilling through granite, porcelain, engineered & natural stone surfaces. Grooved segment style ensures an immediate hold and thereby a smooth and controlled start. Diamond particles on this bit are engineered with a special bond for enhanced performance and durability.

 

DRY Type 25 Diamond DRY Coring Bit - Concrete Core Drill by BLUEROCK  Tools

DRY Type 2.5″ Diamond DRY Coring Bit – Concrete Core Drill by BLUEROCK ® Tools

DRY Type 2.5″ Diamond DRY Coring Bit – Concrete Core Drill by BLUEROCK ® Tools - The overall length is 11″ with the inside measuring around 10″ in depth. New, dry type 2. It’s a high quality bit that’s made to last. Thanks for the interest. It’s designed to drill through concrete, masonry, assorted brick and block as well as other types of rock. It uses the standard 5/8″ 11 unc threads used by most concrete core drills. 5″ bluerock tools diamond coring bit for core drill, new this is a brand new “dry” type concrete coring bit. If you have any questions, please feel free to contact us.

 

2 drywet vaccum brazed protection laser welded diamond core drill bit for dry drilling granite and marble 2

2″ dry/wet vaccum brazed protection laser welded diamond core drill bit for dry drilling granite and marble (2″)

2″ dry/wet vaccum brazed protection laser welded diamond core drill bit for dry drilling granite and marble (2″) - Application variety of soft brick and concrete block. Segment height 10mm new industry designed laser welded u segments with double-pointed tips that penetrate concrete quickly. Diamond stone dry core drill bit. Contractor quality diamond core bit containing high concentrations of top quality diamonds combined with special blend of metal powders for bonding to deliver extremely fast cutting and longer use. Cutting method dry or wet holds a straight drilling path to reduce side drag, and also increases water flow to reduce heat and removal slurry more efficiently.

 

Lackmond DCB175P 1 34-Inch Premium Dry Masonry Core Bit with 58-Inch 11 Threaded Hub

Lackmond DCB1.75P 1 3/4-Inch Premium Dry Masonry Core Bit with 5/8-Inch 11 Threaded Hub

Lackmond DCB1.75P 1 3/4-Inch Premium Dry Masonry Core Bit with 5/8-Inch 11 Threaded Hub - Dry bits are 10″ in length, standard 5/8″-11 thread and are equipped with wrench flats for easy removal when the job is finished. Designed for use on hand held coring rigs and right angle grinders. Dry core bits have a thinner wall and offer superior drilling speed while putting less weight strain on your hand held tool. The dcb tubes are vented to aid in both cooling of the bit and removal of the cuttings.

 

Falcon Diamond 5 Dry Core Bit

Falcon Diamond 5″ Dry Core Bit

Falcon Diamond 5″ Dry Core Bit - Falcon diamond’s line of dry core bits offers a vented tube to keep the bit cool while drilling dry. All dry core bits have 9″ drilling depth allowing it to drill through a standard 8″ masonry block wall. Dry core bits are only intended to drill dry through soft brick or block. .

 

DRY Type 1 Diamond DRY Coring Bit - Concrete Core Drill by BLUEROCK  Tools

DRY Type 1″ Diamond DRY Coring Bit – Concrete Core Drill by BLUEROCK ® Tools

DRY Type 1″ Diamond DRY Coring Bit – Concrete Core Drill by BLUEROCK ® Tools - It’s designed to drill through concrete, masonry, assorted brick and block as well as other types of rock. The overall length is 11″ with the inside measuring around 10″ in depth. New, dry type 1″ bluerock tools diamond coring bit for core drill, new this is a brand new “dry” type concrete coring bit. If you have any questions, please feel free to contact us. Thanks for the interest. It’s a high quality bit that’s made to last. It uses the standard 5/8″ 11 unc threads used by most concrete core drills. .

 

CENTERING BIT 1-14 ADAPTOR TO 58 CORE DRILL DRY CONCRETE CORING TOOL NEW

CENTERING BIT & 1-1/4″ ADAPTOR TO 5/8″ CORE DRILL DRY CONCRETE CORING TOOL NEW

CENTERING BIT & 1-1/4″ ADAPTOR TO 5/8″ CORE DRILL DRY CONCRETE CORING TOOL NEW - Drill and drill bit pictured are not included although they are for sale. It adapts 1-1/4″-7 threads used by most concrete core drills to 5/8″-11 which some coring bits take. For shipping outside of continental united states please contact for shipping quotation, if not otherwise specified in item description. I sell bits as well in my amazon store thanks for the interest. This adapter also has an option to use a centering bit which are used by some dry type shorter coring bits (such as a the bluerock 10″ dry bit). This allows you to use 5/8″ bits with a coring drill. If you have any questions, please feel free to contact us. New, 1-1/4″ adaptor to 5/8″ with centering bit for concrete core drill- new this is a brand new adaptor for concrete coring drills. The centering bit is approximately 12″-13″ from the shoulder of the adapter when in place.

 

MK Diamond 158665 2-Inch Dry Premium Grade Core Bits For Masonry

MK Diamond 158665 2-Inch Dry Premium Grade Core Bits For Masonry

MK Diamond 158665 2-Inch Dry Premium Grade Core Bits For Masonry - They feature laser-welded technology and inventive bar-slot cooling to promote efficiency, reliability and safety. Dry premium core bits are specifically designed to tackle a variety of soft brick and concrete block drilling operations. Measures 2-inch diameter. Dry cutting bits are 10-inch in length, come with standard 5/8-inch, 11 threaded nuts and easily attach to most hand-held drills. Available in 5000 maximum/1200 minimum rpm. Bits are 10 inch length, standard 5/8-11 threaded nuts and easily attach to most hand-held drills. Dry premium core bits are design to tackle soft brick and concrete block drilling operations. Measures 2 inches diameter. Laser-welded technology and inventive bar-slot cooling to promote reliability and safety.

 

MK Diamond 158663 1-12-Inch Dry Premium Grade Core Bits For Masonry

MK Diamond 158663 1-1/2-Inch Dry Premium Grade Core Bits For Masonry

MK Diamond 158663 1-1/2-Inch Dry Premium Grade Core Bits For Masonry - Dry cutting bits are 10-inch in length, come with standard 5/8-inch, 11 threaded nuts and easily attach to most hand-held drills. They feature laser-welded technology and inventive bar-slot cooling to promote efficiency, reliability and safety. Laser-welded technology and inventive bar-slot cooling to promote reliability and safety. Available in 6000 maximum/2300 minimum rpm. Dry premium core bits are specifically designed to tackle a variety of soft brick and concrete block drilling operations. Dry premium core bits are design to tackle soft brick and concrete block drilling operations. Measures 1-1/2-inch diameter. Measures 1-1/2 inches diameter. Bits are 10 inch length, standard 5/8-11 threaded nuts and easily attach to most hand-held drills.

 

78 Turbo Rim Diamond Core Drill Bit - Wet or Dry - for Marble Granite Ceramic Porcelain Tile  Broca para Granito Marmol

7/8″ Turbo Rim Diamond Core Drill Bit – Wet or Dry – for Marble, Granite, Ceramic, Porcelain, Tile / Broca para Granito & Marmol

7/8″ Turbo Rim Diamond Core Drill Bit – Wet or Dry – for Marble, Granite, Ceramic, Porcelain, Tile / Broca para Granito & Marmol - Our core bit is manufactured for drilling through granite, porcelain, engineered & natural stone surfaces. Grooved segment style ensures an immediate hold and thereby a smooth and controlled start. . Diamond particles on this bit are engineered with a special bond for enhanced performance and durability.

 

Concut Inc MBD BLOCK-5 5-Inch Premium Dry Core Bit

Concut Inc MBD BLOCK-5 5-Inch Premium Dry Core Bit

Concut Inc MBD BLOCK-5 5-Inch Premium Dry Core Bit - Unique core cut outs and spiral barrel design remove dust quickly. For use on right angle grinders or hand held drills. Allows for fast drilling in concrete block.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.