21 Best and Coolest Offset Wrenches

 

Wiha 21050 916-Inch Insulated Inch Deep Offset Wrench

Wiha 21050 9/16-Inch Insulated Inch Deep Offset Wrench

Wiha 21050 9/16-Inch Insulated Inch Deep Offset Wrench - Double covered insulation red over yellow. High visibility coatings. Insulated 1000-volt rated 10,000-volt tested. Meets astm f1505, en/iec 60900, nfpa-70e. Guaranteed quality, made in germany.

 

Steel Dragon Tools 31130 Offset 24 Aluminum Pipe Wrench Fits RIDGID Model 24 4 Capacity

Steel Dragon Tools 31130 Offset 24″ Aluminum Pipe Wrench Fits RIDGID Model 24, 4″ Capacity

Steel Dragon Tools 31130 Offset 24″ Aluminum Pipe Wrench Fits RIDGID Model 24, 4″ Capacity - Steel dragon tools® 31130 offset 24″ aluminum pipe wrench fits ridgid® model 24, 4″ capacitysteel dragon tools 31130 offset 24-inch aluminum pipe wrench with a 4-inch pipe capacity. Features a jaw opening parallel to the handle. Features narrow hook jaw head to provide easy entry into tight spots. Lighter than comparable cast-iron models of the same size. Ideal for overhead applications. This offset pipe wrench features a jaw opening parallel to the handle and has a narrow hook jaw head that will fit into tight spaces. Net weight 6 lbs. Part number 31130fits ridgid® 31130 model 24 aluminum offset pipe wrench. Specificationspipe capacity 4 in.

 

MLCS 9431 1-18-Inch Offset Wrench for Porter Cable Routers

MLCS 9431 1-1/8-Inch Offset Wrench for Porter Cable Routers

MLCS 9431 1-1/8-Inch Offset Wrench for Porter Cable Routers - Fits right in the opening of your router plate. Four different sizes to accommodate most router models. Makes changing a router bit easy. Rubber-coated handle provides a sure grip.

 

RIDGID 31125 Model 18 Aluminum Offset Pipe Wrench 18-inch Plumbing Wrench

RIDGID 31125 Model 18 Aluminum Offset Pipe Wrench, 18-inch Plumbing Wrench

RIDGID 31125 Model 18 Aluminum Offset Pipe Wrench, 18-inch Plumbing Wrench - 18-inch (450 mm) pipe wrenches are ideal for pipe diameters of 1 inch (25 mm) to 2 inch (50 mm) with a pipe capacity of up to 2-1/2 inches (65 mm). Features jaw opening parallel to handle and narrow hook jaw head. Offset wrenches provide easy entry into tight spaces and at awkward angles. Ideal for overhead applications. The aluminum ridgid offset pipe wrench delivers the durability of comparable heavy-duty offset pipe wrenches but weighs up to 40 percent less.

 

Wiha 21048 12-Inch Insulated Inch Deep Offset Wrench

Wiha 21048 1/2-Inch Insulated Inch Deep Offset Wrench

Wiha 21048 1/2-Inch Insulated Inch Deep Offset Wrench - Insulated 1000-volt rated 10,000-volt tested. High visibility coatings. Meets astm f1505, en/iec 60900, nfpa-70e. Guaranteed quality, made in germany. Double covered insulation red over yellow.

 

uxcell Metric 12MM 14MM Double Side Combination Offset Box End Wrench 12PT

uxcell Metric 12MM 14MM Double Side Combination Offset Box End Wrench 12PT

uxcell Metric 12MM 14MM Double Side Combination Offset Box End Wrench 12PT - Satin handle provides greater comfort and less chance for slippage. This offset wrench good for adjusting torsion stops on your sprint car or anything else that requires 12mm or 14mm wrench. This 12 point box end wrench works great and combo sizes 12mm and 14mm. Metric combination wrench made from drop forged heat-treated carbon steel. It is brand new and in excellent condition. Chrome plated insures extended life and provides lifetime corrosion resistance. . 12mm 14mm wrench is a must for any serious or novice mechanic or handyman toolbox.

 

Bosch RA1152 Offset Wrenches for Router Bit-Changing

Bosch RA1152 Offset Wrenches for Router Bit-Changing

Bosch RA1152 Offset Wrenches for Router Bit-Changing - Sized to work with bosch routers including 1617, 1617evs, mrf23evs routers and 1617evspk and mrc23evsk router kits. Offset wrench design allows easy router bit changes on routers that are installed in router tables. Drop-forged design with rounded edges provides comfort during bit changes. Includes 16 mm shaft wrench and 24 mm collet wrench. The 24 mm wrench can also be used with bosch 1619evs, 1613, 1613evs and 1613aevs plunge routers.

 

Jumbo Angle Wrench SAE 6 Piece Set 60° and 15° offset open ends

Jumbo Angle Wrench SAE 6 Piece Set 60° and 15° offset open ends

Jumbo Angle Wrench SAE 6 Piece Set 60° and 15° offset open ends - Constructed from chrome plated high carbon steel. 60° and 15° offset open ends. Drop forged raised panel. Conforms to ansi specs. 18″ to 24-1/2″ long.

 

1516 Offset Wrench For Bosch  Triton 2-14 hp  Makita Router By Peachtree Woodworking PW2888

15/16″” Offset Wrench For Bosch / Triton 2-1/4 hp / Makita Router By Peachtree Woodworking PW2888

15/16″” Offset Wrench For Bosch / Triton 2-1/4 hp / Makita Router By Peachtree Woodworking PW2888 - Easily secure the nut below the bit. The “bent wrench” design fits around the opening of the router plate. 90 degree router bit wrench. Handle is coated with solid rubber for easy grip. Four sizes available, each sold separately 15/16″, 3/4″, 7/8″, and 1 1/8″.

 

6 Pc Offset Box Wrench Set - SAE

6 Pc Offset Box Wrench Set – SAE

6 Pc Offset Box Wrench Set – SAE - Sizes 7/32″ x 9/32″, 1/4″ x 5/16″, 3/8″ x 7/16″, 1/2″ x 9/16″, and 5/8″ x 11/16″. Quality construction. Each end is offset 25 degrees to allow for comfortable knuckle clearance. Ratchets forwards and reverse to tighten or loosen. Offset ratchet wrenches are amazingly handy to have around.

 

CTT 24 SAE&MM SIZES 12pc FLARE NUT 15 DEGREE OFFSET WRENCH SET BRAKE AC LINES

CTT 24 SAE&MM SIZES 12pc FLARE NUT 15 DEGREE OFFSET WRENCH SET BRAKE & AC LINES

CTT 24 SAE&MM SIZES 12pc FLARE NUT 15 DEGREE OFFSET WRENCH SET BRAKE & AC LINES - Typeflare nut, system of measurementmetric, warrantyno. Manufacturer part numberccwfnw6m, featuresflare nut. Brandcalhawk, number of pieces6, country/region of manufacturechina.

 

WoodRiver 1-18 Offset Router Collet Wrench For Porter Cable Routers

WoodRiver 1-1/8″ Offset Router Collet Wrench For Porter Cable Routers

WoodRiver 1-1/8″ Offset Router Collet Wrench For Porter Cable Routers - Convenient hanging hole in the end of the wrench. Fits most porter-cable routers. Heavy-gauge plated steel for strength and durability. Rubber grip for comfort. Sized opening offset approximately 1″ parallel to the handle.

 

uxcell 12PT Metric 17MM 19MM Double Side Offset Combination Box End Wrench

uxcell® 12PT Metric 17MM 19MM Double Side Offset Combination Box End Wrench

uxcell® 12PT Metric 17MM 19MM Double Side Offset Combination Box End Wrench - Length ~25cm, weight 157g. Uxcell (u excel ) is the sole authorized seller of uxcell products. This 12 point box end wrench works great and combo sizes 17mm & 19mm. Metric combination wrench made from drop forged heat-treated carbon steel. Satin handle provides greater comfort and less chance for slippage.

 

KT Pro Tools A1701SR 75 Degree Offset Box End Wrench

KT Pro Tools A1701SR 75 Degree Offset Box End Wrench

KT Pro Tools A1701SR 75 Degree Offset Box End Wrench - High-polished chrome and satin finishes. 75 degree offset box end wrenches 12 point, 1/4 inch x 5/16 inch, 3/8 inch x 7/16 inch, 1/2 inch x 9/16 inch, 5/8 inch x 11/16 inch, 3/4 inch x 7/8 inch, 15/16 inch x 1 inch, 1-1/16 inch x 1-1/8 inch. Industrial grade. Durable chrome vanadium steel. Larger markings for easy size identification.

 

uxcell Portable 12 Point Box End 8mm 10mm Double Side Offset Wrench Tool

uxcell Portable 12 Point Box End 8mm 10mm Double Side Offset Wrench Tool

uxcell Portable 12 Point Box End 8mm 10mm Double Side Offset Wrench Tool - Chrome plated insures extended life and provides lifetime corrosion resistance. Portable 12 point box end 8mm 10mm double side offset wrench tool. Size 14 x 18 x 08cm weight 50g. Package content 1 x offset wrench. Offset wrench tool is a must for any serious or novice mechanic or handyman’s toolbox.

 

uxcell Metric 19MM 22MM Double Side Offset Combination Box End Wrench 12PT

uxcell Metric 19MM 22MM Double Side Offset Combination Box End Wrench 12PT

uxcell Metric 19MM 22MM Double Side Offset Combination Box End Wrench 12PT - Metric combination wrench made from drop forged heat-treated carbon steel. Length ~285cm weight 255g. Package content 1 x combination wrench. This 12 point box end wrench works great and combo sizes 19mm & 22mm. Chrome plated insures extended life and provides lifetime corrosion resistance.

 

Peachtree Woodworking PW2890 78 Offset Wrench For Dewalt  Fein Router

Peachtree Woodworking PW2890 7/8″ Offset Wrench For Dewalt / Fein Router

Peachtree Woodworking PW2890 7/8″ Offset Wrench For Dewalt / Fein Router - Handle is coated with solid rubber for easy grip. Four sizes available, each sold separately 15/16″, 3/4″, 7/8″, and 1 1/8″. Easily secure the nut below the bit. 90 degree router bit wrench. The “bent wrench” design fits around the opening of the router plate.

 

Powerbuilt 644170 Metric Offset Box Wrench Set - 5 Pc 10mm - 19mm

Powerbuilt 644170 Metric Offset Box Wrench Set – 5 Pc (10mm – 19mm)

Powerbuilt 644170 Metric Offset Box Wrench Set – 5 Pc (10mm – 19mm) - Carbon steel construction box wrenches offer a better grip on fasteners. Polished finish. All box ends are chamfered and broached for a tighter fit on a corroded or damaged fasteners.

 

Reed RWO14 14-Inch Offset Steel Wrench

Reed RWO14 14-Inch Offset Steel Wrench

Reed RWO14 14-Inch Offset Steel Wrench - Offset wrenches have similar construction and provide longer swing and better access to hard-to-reach places. High-tensile ductile iron handle and hardened, alloy steel parts are designed to withstand the heaviest demands. The most popular pipe wrench style.

 

5 Piece Metric Offset Wrenches

5 Piece Metric Offset Wrenches

5 Piece Metric Offset Wrenches - Sizes include 6mm, 8mm, 10mm, 11mm, 12mm, 13mm, 14mm, and 17mm. Our ratcheting boxed wrenches are perfect for hard to reach areas. Sku 2161d. Each wrench has two sizes and is offset 25 degrees. 5 pc heavy duty offset ratcheting boxed wrench by american pro.

 

34 Offset Wrench For Hitachi  Triton 3 14 hp Router By Peachtree Woodworking PW2889

3/4″ Offset Wrench For Hitachi / Triton 3 1/4 hp Router By Peachtree Woodworking PW2889

3/4″ Offset Wrench For Hitachi / Triton 3 1/4 hp Router By Peachtree Woodworking PW2889 - The handle is coated  with a solid rubber for a nice easy grip. The 90° router bit wrench makes a difficult router bit change easier with it’s “bent wrench” design. The wrench comes in four different sizes for your use with most routers 15/16″, 3/4″, 7/8″, and 1-1/8. Simple in design, and simple to use. The wrench bends right around the opening of your router plate so you can easily secure the nut below your bit on your router.