21 Best End Mill Diameters

 

Kyocera USA Made 4 Flute Standard Length Ball Nose End Mill 01050in Diameter 18in Shank 0315in Length of Cut 1 12in Overall Length AlTiN Coated Series 1825 1825-1050L315

Kyocera USA Made 4 Flute Standard Length Ball Nose End Mill 0.1050in Diameter 1/8in Shank 0.315in Length of Cut 1 1/2in Overall Length AlTiN Coated Series 1825 (1825-1050L315)

Kyocera USA Made 4 Flute Standard Length Ball Nose End Mill 0.1050in Diameter 1/8in Shank 0.315in Length of Cut 1 1/2in Overall Length AlTiN Coated Series 1825 (1825-1050L315) - Series 1825, altin coated. Reach length n/a, radius n/a. 01050in diameter, 1/8in shank, 0315in length of cut, 1 1/2in overall length. Kyocera usa made 1825-1050l315 4 flute standard length ball nose end mill. This is an authentic kyocera product, and this listing is brand registered please do not list your item against this asin if you are not selling an authentic kyocera product of the same part number.

 

Kyocera Standard Length APOLLO Variable Helix End Mill 01250 18in Diameter 18in Shank 12in Length of Cut 1-12in Overall Length AlCrN 4 Flute Corner Radius AP4-1250500

Kyocera Standard Length APOLLO Variable Helix End Mill 0.1250 1/8in Diameter 1/8in Shank 1/2in Length of Cut 1-1/2in Overall Length AlCrN 4 Flute Corner Radius AP4-1250.500

Kyocera Standard Length APOLLO Variable Helix End Mill 0.1250 1/8in Diameter 1/8in Shank 1/2in Length of Cut 1-1/2in Overall Length AlCrN 4 Flute Corner Radius AP4-1250.500 - This is an authentic kyocera product, and this listing is brand registered please do not list your item against this asin if you are not selling an authentic kyocera product of the same part number. Kyocera ap4-1250500 standard length apollo variable helix end mill. End type corner radius, reach n/a, radius 0010, 0015in, point angle n/a. Coating alcrn, flutes 4 flute. Diameter 01250 1/8in, shank 1/8in, length of cut 1/2in, overall length 1-1/2in.

 

Niagara Cutter N55830 Carbide Square Nose End Mill Inch TiAlN Finish Roughing and Finishing Cut 30 Degree Helix 4 Flutes 6 Overall Length 1000 Cutting Diameter 1000 Shank Diameter

Niagara Cutter N55830 Carbide Square Nose End Mill, Inch, TiAlN Finish, Roughing and Finishing Cut, 30 Degree Helix, 4 Flutes, 6″ Overall Length, 1.000″ Cutting Diameter, 1.000″ Shank Diameter

Niagara Cutter N55830 Carbide Square Nose End Mill, Inch, TiAlN Finish, Roughing and Finishing Cut, 30 Degree Helix, 4 Flutes, 6″ Overall Length, 1.000″ Cutting Diameter, 1.000″ Shank Diameter - Carbide can run at higher speeds than high-speed steel, resisting abrasion and high cutting temperatures. Four flutes produce a better finish than fewer flutes. Titanium aluminum nitride (tialn) coating lubricates the end mill for high-temperature stability and abrasion resistance at high cutting speeds, offering better heat resistance than tin and ticn coatings. Center-cutting design allows the end mill to plunge into material like a drill bit while also performing conventional surface milling. Square nose end mills (also called square end) create sharp, unrounded cuts.

 

Kyocera USA Made 2 Flute Stub Length Ball Nose End Mill 150mm Diameter 3mm Shank 225mm Length of Cut 38mm Overall Length Uncoated Series 1635 1635-0591089

Kyocera USA Made 2 Flute Stub Length Ball Nose End Mill 1.50mm Diameter 3mm Shank 2.25mm Length of Cut 38mm Overall Length Uncoated Series 1635 (1635-0591.089)

Kyocera USA Made 2 Flute Stub Length Ball Nose End Mill 1.50mm Diameter 3mm Shank 2.25mm Length of Cut 38mm Overall Length Uncoated Series 1635 (1635-0591.089) - This is an authentic kyocera product, and this listing is brand registered please do not list your item against this asin if you are not selling an authentic kyocera product of the same part number. Reach length n/a, radius n/a. Series 1635, uncoated. 150mm diameter, 3mm shank, 225mm length of cut, 38mm overall length. Kyocera usa made 1635-0591089 2 flute stub length ball nose end mill.

 

Kyocera USA Made 3 Flute Extended Reach Stub Length Square End Mill 00156 164in Diameter 18in Shank 0022in Length of Cut LOC 2 12in Overall Length OAL Uncoated Series 1742 1742-0156156

Kyocera USA Made 3 Flute Extended Reach Stub Length Square End Mill 0.0156 1/64in Diameter 1/8in Shank 0.022in Length of Cut (LOC) 2 1/2in Overall Length (OAL) Uncoated Series 1742 (1742-0156.156)

Kyocera USA Made 3 Flute Extended Reach Stub Length Square End Mill 0.0156 1/64in Diameter 1/8in Shank 0.022in Length of Cut (LOC) 2 1/2in Overall Length (OAL) Uncoated Series 1742 (1742-0156.156) - Kyocera 1742-0156156 3 flute extended reach stub length square end mill. 00156 1/64in diameter, 1/8in shank. Uncoated. This is an authentic kyocera product, and this listing is brand registered please do not list your item against this asin if you are not selling an authentic kyocera product of the same part number. 0022in length of cut, 2 1/2in overall length.

 

Kyocera USA Made 3 Flute Reinforced Shank Corner Radius End Mill 500mm Diameter 6mm Shank 150mm Length of Cut LOC 75mm Overall Length OAL AX Coated TITAN-AX T1969O591ECR5

Kyocera USA Made 3 Flute Reinforced Shank Corner Radius End Mill 5.00mm Diameter 6mm Shank 15.0mm Length of Cut (LOC) 75mm Overall Length (OAL) AX Coated TITAN-AX (T1969O591ECR5)

Kyocera USA Made 3 Flute Reinforced Shank Corner Radius End Mill 5.00mm Diameter 6mm Shank 15.0mm Length of Cut (LOC) 75mm Overall Length (OAL) AX Coated TITAN-AX (T1969O591ECR5) - 500mm diameter, 6mm shank. Kyocera titan-ax t1969o591ecr5 3 flute reinforced shank corner radius end mill (extended length). 150mm length of cut, 75mm overall length. Ax high performance coating for tough machining applications. This is an authentic kyocera product, and this listing is brand registered please do not list your item against this asin if you are not selling an authentic kyocera product of the same part number.

 

Kyocera USA Made 3 Flute Extended Reach Stub Length Ball Nose End Mill 00500in Diameter 18in Shank 0075in Length of Cut 2 12in Overall Length Uncoated Series 1755 1755-0500250

Kyocera USA Made 3 Flute Extended Reach Stub Length Ball Nose End Mill 0.0500in Diameter 1/8in Shank 0.075in Length of Cut 2 1/2in Overall Length Uncoated Series 1755 (1755-0500.250)

Kyocera USA Made 3 Flute Extended Reach Stub Length Ball Nose End Mill 0.0500in Diameter 1/8in Shank 0.075in Length of Cut 2 1/2in Overall Length Uncoated Series 1755 (1755-0500.250) - This is an authentic kyocera product, and this listing is brand registered please do not list your item against this asin if you are not selling an authentic kyocera product of the same part number. Kyocera usa made 1755-0500250 3 flute extended reach stub length ball nose end mill. Reach length 025in, radius n/a. Series 1755, uncoated. 00500in diameter, 1/8in shank, 0075in length of cut, 2 1/2in overall length.

 

Kyocera USA Made 2 Flute Standard Length Square End Mill 0085in Diameter 18in Shank 0255in Length of Cut LOC 1 12in Overall Length OAL AlTiN Coated Series 1610 1610-0850L255

Kyocera USA Made 2 Flute Standard Length Square End Mill 0.085in Diameter 1/8in Shank 0.255in Length of Cut (LOC) 1 1/2in Overall Length (OAL) AlTiN Coated Series 1610 (1610-0850L255)

Kyocera USA Made 2 Flute Standard Length Square End Mill 0.085in Diameter 1/8in Shank 0.255in Length of Cut (LOC) 1 1/2in Overall Length (OAL) AlTiN Coated Series 1610 (1610-0850L255) - Kyocera 1610-0850l255 2 flute standard length square end mill. Altin coated. This is an authentic kyocera product, and this listing is brand registered please do not list your item against this asin if you are not selling an authentic kyocera product of the same part number. 0085in diameter, 1/8in shank. 0255in length of cut, 1 1/2in overall length.

 

Kyocera USA Made 3 Flute Extended Reach Stub Length Square End Mill 00650in Diameter 18in Shank 0097in Length of Cut LOC 2 12in Overall Length OAL Uncoated Series 1742 1742-0650800

Kyocera USA Made 3 Flute Extended Reach Stub Length Square End Mill 0.0650in Diameter 1/8in Shank 0.097in Length of Cut (LOC) 2 1/2in Overall Length (OAL) Uncoated Series 1742 (1742-0650.800)

Kyocera USA Made 3 Flute Extended Reach Stub Length Square End Mill 0.0650in Diameter 1/8in Shank 0.097in Length of Cut (LOC) 2 1/2in Overall Length (OAL) Uncoated Series 1742 (1742-0650.800) - 0097in length of cut, 2 1/2in overall length. Kyocera 1742-0650800 3 flute extended reach stub length square end mill. Uncoated. 00650in diameter, 1/8in shank. This is an authentic kyocera product, and this listing is brand registered please do not list your item against this asin if you are not selling an authentic kyocera product of the same part number.

 

Kyocera USA Made 3 Flute Extended Reach Large Corner Radius End Mill 01250 18in Diameter 18in Shank 0187in Length of Cut 25in Overall Length AlTiN Coated Series 1746 1746-1250L625CR

Kyocera USA Made 3 Flute Extended Reach Large Corner Radius End Mill 0.1250 1/8in Diameter 1/8in Shank 0.187in Length of Cut 2.5in Overall Length AlTiN Coated Series 1746 (1746-1250L625CR)

Kyocera USA Made 3 Flute Extended Reach Large Corner Radius End Mill 0.1250 1/8in Diameter 1/8in Shank 0.187in Length of Cut 2.5in Overall Length AlTiN Coated Series 1746 (1746-1250L625CR) - Series 1746, altin coated. 01250 1/8in diameter, 1/8in shank, 0187in length of cut, 25in overall length. Reach length 0625in, radius 003in. This is an authentic kyocera product, and this listing is brand registered please do not list your item against this asin if you are not selling an authentic kyocera product of the same part number. Kyocera usa made 1746-1250l625cr 3 flute extended reach large corner radius end mill.

 

Kyocera USA Made 3 Flute Extended Reach Small Corner Radius End Mill 01250 18in Diameter 18in Shank 0187in Length of Cut 25in Overall Length Uncoated Series 1743 1743-12501000C

Kyocera USA Made 3 Flute Extended Reach Small Corner Radius End Mill 0.1250 1/8in Diameter 1/8in Shank 0.187in Length of Cut 2.5in Overall Length Uncoated Series 1743 (1743-1250.1000C)

Kyocera USA Made 3 Flute Extended Reach Small Corner Radius End Mill 0.1250 1/8in Diameter 1/8in Shank 0.187in Length of Cut 2.5in Overall Length Uncoated Series 1743 (1743-1250.1000C) - Series 1743, uncoated. This is an authentic kyocera product, and this listing is brand registered please do not list your item against this asin if you are not selling an authentic kyocera product of the same part number. Kyocera usa made 1743-12501000c 3 flute extended reach small corner radius end mill. 01250 1/8in diameter, 1/8in shank, 0187in length of cut, 25in overall length. Reach length 1in, radius 001in.

 

Kyocera USA Made 5 Flute High Helix Standard Length Corner Radius End Mill 100mm Diameter 3mm Shank 300mm Length of Cut 38mm Overall Length Uncoated Series 1905 1905-0394118R

Kyocera USA Made 5 Flute High Helix Standard Length Corner Radius End Mill 1.00mm Diameter 3mm Shank 3.00mm Length of Cut 38mm Overall Length Uncoated Series 1905 (1905-0394.118R)

Kyocera USA Made 5 Flute High Helix Standard Length Corner Radius End Mill 1.00mm Diameter 3mm Shank 3.00mm Length of Cut 38mm Overall Length Uncoated Series 1905 (1905-0394.118R) - This is an authentic kyocera product, and this listing is brand registered please do not list your item against this asin if you are not selling an authentic kyocera product of the same part number. Series 1905, uncoated. Kyocera usa made 1905-0394118r 5 flute high helix standard length corner radius end mill. 100mm diameter, 3mm shank, 300mm length of cut, 38mm overall length. Reach length n/a, radius 010mm.

 

Kyocera USA Made 2 Flute Standard Length Square End Mill 00625 116in Diameter 18in Shank 0188in Length of Cut LOC 1 12in Overall Length OAL Uncoated Series 1610 1610-0625188

Kyocera USA Made 2 Flute Standard Length Square End Mill 0.0625 1/16in Diameter 1/8in Shank 0.188in Length of Cut (LOC) 1 1/2in Overall Length (OAL) Uncoated Series 1610 (1610-0625.188)

Kyocera USA Made 2 Flute Standard Length Square End Mill 0.0625 1/16in Diameter 1/8in Shank 0.188in Length of Cut (LOC) 1 1/2in Overall Length (OAL) Uncoated Series 1610 (1610-0625.188) - Uncoated. Kyocera 1610-0625188 2 flute standard length square end mill. 0188in length of cut, 1 1/2in overall length. 00625 1/16in diameter, 1/8in shank. This is an authentic kyocera product, and this listing is brand registered please do not list your item against this asin if you are not selling an authentic kyocera product of the same part number.

 

Kyocera USA Made 3 Flute Extended Reach Stub Length Square End Mill 00450in Diameter 18in Shank 0067in Length of Cut LOC 2 12in Overall Length OAL Uncoated Series 1742 1742-0450135

Kyocera USA Made 3 Flute Extended Reach Stub Length Square End Mill 0.0450in Diameter 1/8in Shank 0.067in Length of Cut (LOC) 2 1/2in Overall Length (OAL) Uncoated Series 1742 (1742-0450.135)

Kyocera USA Made 3 Flute Extended Reach Stub Length Square End Mill 0.0450in Diameter 1/8in Shank 0.067in Length of Cut (LOC) 2 1/2in Overall Length (OAL) Uncoated Series 1742 (1742-0450.135) - 0067in length of cut, 2 1/2in overall length. Uncoated. Kyocera 1742-0450135 3 flute extended reach stub length square end mill. This is an authentic kyocera product, and this listing is brand registered please do not list your item against this asin if you are not selling an authentic kyocera product of the same part number. 00450in diameter, 1/8in shank.

 

Kyocera USA Made 3 Flute Extended Reach Large Corner Radius End Mill 01250 18in Diameter 18in Shank 0187in Length of Cut 2 12in Overall Length Uncoated Series 1746 1746-1250625CR

Kyocera USA Made 3 Flute Extended Reach Large Corner Radius End Mill 0.1250 1/8in Diameter 1/8in Shank 0.187in Length of Cut 2 1/2in Overall Length Uncoated Series 1746 (1746-1250.625CR)

Kyocera USA Made 3 Flute Extended Reach Large Corner Radius End Mill 0.1250 1/8in Diameter 1/8in Shank 0.187in Length of Cut 2 1/2in Overall Length Uncoated Series 1746 (1746-1250.625CR) - 01250 1/8in diameter, 1/8in shank, 0187in length of cut, 2 1/2in overall length. Kyocera usa made 1746-1250625cr 3 flute extended reach large corner radius end mill. Series 1746, uncoated. This is an authentic kyocera product, and this listing is brand registered please do not list your item against this asin if you are not selling an authentic kyocera product of the same part number. Reach length 0625in, radius 003in.

 

Kyocera USA Made 3 Flute Extended Length Square End Mill 00312 132in Diameter 18in Shank 0155in Length of Cut LOC 2 12in Overall Length OAL AlTiN Coated Series 1740 1740-0312L310

Kyocera USA Made 3 Flute Extended Length Square End Mill 0.0312 1/32in Diameter 1/8in Shank 0.155in Length of Cut (LOC) 2 1/2in Overall Length (OAL) AlTiN Coated Series 1740 (1740-0312L310)

Kyocera USA Made 3 Flute Extended Length Square End Mill 0.0312 1/32in Diameter 1/8in Shank 0.155in Length of Cut (LOC) 2 1/2in Overall Length (OAL) AlTiN Coated Series 1740 (1740-0312L310) - Altin coated. 00312 1/32in diameter, 1/8in shank. This is an authentic kyocera product, and this listing is brand registered please do not list your item against this asin if you are not selling an authentic kyocera product of the same part number. Kyocera 1740-0312l310 3 flute extended length square end mill. 0155in length of cut, 2 1/2in overall length.

 

Kyocera USA Made 3 Flute Extended Reach Stub Length Square End Mill 00100in Diameter 18in Shank 0015in Length of Cut LOC 2 12in Overall Length OAL AlTiN Coated Series 1742 1742-0100L080

Kyocera USA Made 3 Flute Extended Reach Stub Length Square End Mill 0.0100in Diameter 1/8in Shank 0.015in Length of Cut (LOC) 2 1/2in Overall Length (OAL) AlTiN Coated Series 1742 (1742-0100L080)

Kyocera USA Made 3 Flute Extended Reach Stub Length Square End Mill 0.0100in Diameter 1/8in Shank 0.015in Length of Cut (LOC) 2 1/2in Overall Length (OAL) AlTiN Coated Series 1742 (1742-0100L080) - Altin coated. 0015in length of cut, 2 1/2in overall length. This is an authentic kyocera product, and this listing is brand registered please do not list your item against this asin if you are not selling an authentic kyocera product of the same part number. 00100in diameter, 1/8in shank. Kyocera 1742-0100l080 3 flute extended reach stub length square end mill.

 

Kyocera USA Made 2 Flute Standard Length Ball Nose End Mill 00625 116in Diameter 18in Shank 0188in Length of Cut 1 12in Overall Length AlTiN Coated Series 1625 1625-0625L188

Kyocera USA Made 2 Flute Standard Length Ball Nose End Mill 0.0625 1/16in Diameter 1/8in Shank 0.188in Length of Cut 1 1/2in Overall Length AlTiN Coated Series 1625 (1625-0625L188)

Kyocera USA Made 2 Flute Standard Length Ball Nose End Mill 0.0625 1/16in Diameter 1/8in Shank 0.188in Length of Cut 1 1/2in Overall Length AlTiN Coated Series 1625 (1625-0625L188) - Series 1625, altin coated. 00625 1/16in diameter, 1/8in shank, 0188in length of cut, 1 1/2in overall length. Reach length n/a, radius n/a. Kyocera usa made 1625-0625l188 2 flute standard length ball nose end mill. This is an authentic kyocera product, and this listing is brand registered please do not list your item against this asin if you are not selling an authentic kyocera product of the same part number.

 

Kyocera USA Made 3 Flute Extended Reach Stub Length Ball Nose End Mill 00400in Diameter 18in Shank 0060in Length of Cut 2 12in Overall Length AlTiN Coated Series 1755 1755-0400L203

Kyocera USA Made 3 Flute Extended Reach Stub Length Ball Nose End Mill 0.0400in Diameter 1/8in Shank 0.060in Length of Cut 2 1/2in Overall Length AlTiN Coated Series 1755 (1755-0400L203)

Kyocera USA Made 3 Flute Extended Reach Stub Length Ball Nose End Mill 0.0400in Diameter 1/8in Shank 0.060in Length of Cut 2 1/2in Overall Length AlTiN Coated Series 1755 (1755-0400L203) - Series 1755, altin coated. Kyocera usa made 1755-0400l203 3 flute extended reach stub length ball nose end mill. 00400in diameter, 1/8in shank, 0060in length of cut, 2 1/2in overall length. Reach length 0203in, radius n/a. This is an authentic kyocera product, and this listing is brand registered please do not list your item against this asin if you are not selling an authentic kyocera product of the same part number.

 

Kyocera USA Made 2 Flute Stub Length Square End Mill 02mm Diameter 3mm Shank 03mm Length of Cut LOC 38mm Overall Length OAL Uncoated Series 1620 1620-0079012

Kyocera USA Made 2 Flute Stub Length Square End Mill 0.2mm Diameter 3mm Shank 0.3mm Length of Cut (LOC) 38mm Overall Length (OAL) Uncoated Series 1620 (1620-0079.012)

Kyocera USA Made 2 Flute Stub Length Square End Mill 0.2mm Diameter 3mm Shank 0.3mm Length of Cut (LOC) 38mm Overall Length (OAL) Uncoated Series 1620 (1620-0079.012) - 02mm diameter, 3mm shank. Uncoated. Kyocera 1620-0079012 2 flute stub length square end mill. 03mm length of cut, 38mm overall length. This is an authentic kyocera product, and this listing is brand registered please do not list your item against this asin if you are not selling an authentic kyocera product of the same part number.

 

Niagara Cutter 85705 Flute Single End Solid Carbide End Mill Diameter 85705

Niagara Cutter 85705 Flute Single End Solid Carbide End Mill, Diameter 85705

Niagara Cutter 85705 Flute Single End Solid Carbide End Mill, Diameter 85705 - 0019in diameter, 1/8in shank. Niagara cutter 5/8″ x 5/8″ x 6″ 4-flute x 3″ flute length. Uncoated. Kyocera 1610-0190057 2 flute standard length square end mill. This is an authentic kyocera product, and this listing is brand registered please do not list your item against this asin if you are not selling an authentic kyocera product of the same part number.