23 Top Chamfer End Mills

 

Niagara Cutter N76598 Carbide Chamfering Mill TiAlN Coated 4 Flutes 60 Degree Chamfer End 716 Cut Cutting Length 12 Diameter

Niagara Cutter N76598 Carbide Chamfering Mill, TiAlN Coated, 4 Flutes, 60 Degree Chamfer End, 7/16″ Cut Cutting Length, 1/2″ Diameter

Niagara Cutter N76598 Carbide Chamfering Mill, TiAlN Coated, 4 Flutes, 60 Degree Chamfer End, 7/16″ Cut Cutting Length, 1/2″ Diameter - Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. Features a fine-pitch rougher with chamfer. Center cutting end mills are designed with “end teeth” making these ideal for slotting and cavity applications. 4 flute design for creating finer finishes and a highter metal removal rate. Titanium aluminum nitride (tialn), combines high thermal stability with excellent hardness for abrasion resistance and a low coefficient of friction, for lubricity.

 

Niagara Cutter N76591 Carbide Chamfering Mill TiAlN Coated 2 Flutes 60 Degree Chamfer End 516 Cut Cutting Length 38 Diameter

Niagara Cutter N76591 Carbide Chamfering Mill, TiAlN Coated, 2 Flutes, 60 Degree Chamfer End, 5/16″ Cut Cutting Length, 3/8″ Diameter

Niagara Cutter N76591 Carbide Chamfering Mill, TiAlN Coated, 2 Flutes, 60 Degree Chamfer End, 5/16″ Cut Cutting Length, 3/8″ Diameter - Center cutting end mills are designed with “end teeth” making these ideal for slotting and cavity applications. Titanium aluminum nitride (tialn), combines high thermal stability with excellent hardness for abrasion resistance and a low coefficient of friction, for lubricity. Features a fine-pitch rougher with chamfer. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. 2 flute design makes these ideal for plung cutting when chip removal is not a problem.

 

Kodiak Cutting Tools KCT254588 USA Made Double End Solid Carbide Chamfer Mill AlTiN Coated 100 Degree 4 Flute 316 Shank 316 Diameter 2-12 Overall Length

Kodiak Cutting Tools KCT254588 USA Made Double End Solid Carbide Chamfer Mill, AlTiN Coated, 100 Degree, 4 Flute, 3/16″ Shank, 3/16″ Diameter, 2-1/2″ Overall Length

Kodiak Cutting Tools KCT254588 USA Made Double End Solid Carbide Chamfer Mill, AlTiN Coated, 100 Degree, 4 Flute, 3/16″ Shank, 3/16″ Diameter, 2-1/2″ Overall Length - 3/16 inch diameter solid carbide chamfer mill 3/16″ shank 2-1/2″ overall length 4 flute 100 degree carbide, chamfer mill. .

 

14 Hex Shank HCS 90 Degree 5 Flute 12mm16mm19mm Chamfer Chamfering End Mill Cutter Bit Countersink Set 3PcsSet

1/4″ Hex Shank HCS 90 Degree 5 Flute 12mm/16mm/19mm Chamfer Chamfering End Mill Cutter Bit Countersink Set 3Pcs/Set

1/4″ Hex Shank HCS 90 Degree 5 Flute 12mm/16mm/19mm Chamfer Chamfering End Mill Cutter Bit Countersink Set 3Pcs/Set - Five flute design reduces vibration for smoother drilling and extended life. Noteplease do not use this chamfer on the metal material. Precision-ground 90 degree tip for countersinking into wood plate or thin plastic plate. Material high carbon steel. 1/4″ round shank fits all handheld and stationary drills.

 

MariTool Chamfer Mill 125 Dia X 60 Degree 4 Flute Double End Made in USA 3500-125-60DEG

MariTool Chamfer Mill .125 Dia X 60 Degree 4 Flute Double End, Made in USA 3500-.125-60DEG

MariTool Chamfer Mill .125 Dia X 60 Degree 4 Flute Double End, Made in USA 3500-.125-60DEG - 120 degree. 1/4 shank diameter. Number of flutes 4|centercutting yes|double ended yes|coating tialn|shank size 125|total length 150|included angle 60 degrees (30 deg per side)|material solid micrograin carbide. 2-1/2 overall length. 4 flutes.

 

In-tool-home Heavy Duty Industrial Countersink Drill Bit Set Woodworking Chamfer End Mill Cutter Tool Set of 5

In-tool-home Heavy Duty Industrial Countersink Drill Bit Set Woodworking Chamfer End Mill Cutter Tool Set of 5

In-tool-home Heavy Duty Industrial Countersink Drill Bit Set Woodworking Chamfer End Mill Cutter Tool Set of 5 - Materialhss4341 5 flute and 82 degree point angle 1/4″ tri-flat shank for easy grip head size 1/4″, 3/8″, 1/2″, 5/8″, 3/4″ (length 7/32″) cut quickly and easily in soft metal, wood, rubber, plastic and other machinable materials package include5 x 82 degree countersink drill bits.

 

MariTool Chamfer Mill 500 Dia X 120 Degree 4 Flute Double End Made in USA 3500-500-120DEG

MariTool Chamfer Mill .500 Dia X 120 Degree 4 Flute Double End, Made in USA 3500-.500-120DEG

MariTool Chamfer Mill .500 Dia X 120 Degree 4 Flute Double End, Made in USA 3500-.500-120DEG - Positive inserts, 15 degree clearance. 4 cutting edges. High rate of material removal. Use for 15 degree positive square sdgw 090308 inserts. Total length 300|shank size 500|material solid micrograin carbide|coating tialn|number of flutes 4|centercutting yes|double ended yes|included angle 120 degrees (60 deg per side).

 

Bassett MCH-4R Series Solid Carbide End Mill Uncoated Bright Finish 4 Flute 82 Degrees Profile Angle Chamfer End 058 Cutting Length 12 Cutting Diameter 3 Length Pack of 1

Bassett MCH-4R Series Solid Carbide End Mill, Uncoated (Bright) Finish, 4 Flute, 82 Degrees Profile Angle, Chamfer End, 0.58″ Cutting Length, 1/2″ Cutting Diameter, 3″ Length (Pack of 1)

Bassett MCH-4R Series Solid Carbide End Mill, Uncoated (Bright) Finish, 4 Flute, 82 Degrees Profile Angle, Chamfer End, 0.58″ Cutting Length, 1/2″ Cutting Diameter, 3″ Length (Pack of 1) - When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. Applicable for steel, cast iron, nonferrous material. Round shanks allow use with a wide variety of toolholding systems.

 

MariTool Chamfer Mill 125 Dia X 82 Degree 4 Flute Double End Made in USA 3500-125-82DEG

MariTool Chamfer Mill .125 Dia X 82 Degree 4 Flute Double End, Made in USA 3500-.125-82DEG

MariTool Chamfer Mill .125 Dia X 82 Degree 4 Flute Double End, Made in USA 3500-.125-82DEG - Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Round shanks allow use with a wide variety of toolholding systems. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. 90 degree helix angle. Number of flutes 4|centercutting yes|double ended yes|coating tialn|material solid micrograin carbide|shank size 125|total length 15|included angle 82 degrees (41 deg per side).

 

Bassett MCH-2R Series Solid Carbide End Mill Uncoated Bright Finish 2 Flute 120 Degrees Profile Angle Chamfer End 075 Cutting Length 12 Cutting Diameter 3 Length Pack of 1

Bassett MCH-2R Series Solid Carbide End Mill, Uncoated (Bright) Finish, 2 Flute, 120 Degrees Profile Angle, Chamfer End, 0.75″ Cutting Length, 1/2″ Cutting Diameter, 3″ Length (Pack of 1)

Bassett MCH-2R Series Solid Carbide End Mill, Uncoated (Bright) Finish, 2 Flute, 120 Degrees Profile Angle, Chamfer End, 0.75″ Cutting Length, 1/2″ Cutting Diameter, 3″ Length (Pack of 1) - Applicable for steel, cast iron, nonferrous material. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Round shanks allow use with a wide variety of toolholding systems. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems.

 

Bassett MCH-2R Series Solid Carbide End Mill Uncoated Bright Finish 2 Flute 90 Degrees Profile Angle Chamfer End 015 Cutting Length 18 Cutting Diameter 1-12 Length Pack of 1

Bassett MCH-2R Series Solid Carbide End Mill, Uncoated (Bright) Finish, 2 Flute, 90 Degrees Profile Angle, Chamfer End, 0.15″ Cutting Length, 1/8″ Cutting Diameter, 1-1/2″ Length (Pack of 1)

Bassett MCH-2R Series Solid Carbide End Mill, Uncoated (Bright) Finish, 2 Flute, 90 Degrees Profile Angle, Chamfer End, 0.15″ Cutting Length, 1/8″ Cutting Diameter, 1-1/2″ Length (Pack of 1) - Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. Round shanks allow use with a wide variety of toolholding systems. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Applicable for steel, cast iron, nonferrous material. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging.

 

Niagara Cutter N76594 Carbide Chamfering Mill TiAlN Coated 2 Flutes 90 Degree Chamfer End 316 Cut Cutting Length 38 Diameter

Niagara Cutter N76594 Carbide Chamfering Mill, TiAlN Coated, 2 Flutes, 90 Degree Chamfer End, 3/16″ Cut Cutting Length, 3/8″ Diameter

Niagara Cutter N76594 Carbide Chamfering Mill, TiAlN Coated, 2 Flutes, 90 Degree Chamfer End, 3/16″ Cut Cutting Length, 3/8″ Diameter - Titanium aluminum nitride (tialn), combines high thermal stability with excellent hardness for abrasion resistance and a low coefficient of friction, for lubricity. 2 flute design makes these ideal for plung cutting when chip removal is not a problem. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. Features a fine-pitch rougher with chamfer. Center cutting end mills are designed with “end teeth” making these ideal for slotting and cavity applications.

 

Bassett MCH-2R Series Solid Carbide End Mill Uncoated Bright Finish 2 Flute 82 Degrees Profile Angle Chamfer End 036 Cutting Length 14 Cutting Diameter 2-12 Length Pack of 1

Bassett MCH-2R Series Solid Carbide End Mill, Uncoated (Bright) Finish, 2 Flute, 82 Degrees Profile Angle, Chamfer End, 0.36″ Cutting Length, 1/4″ Cutting Diameter, 2-1/2″ Length (Pack of 1)

Bassett MCH-2R Series Solid Carbide End Mill, Uncoated (Bright) Finish, 2 Flute, 82 Degrees Profile Angle, Chamfer End, 0.36″ Cutting Length, 1/4″ Cutting Diameter, 2-1/2″ Length (Pack of 1) - Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Round shanks allow use with a wide variety of toolholding systems. Applicable for steel, cast iron, nonferrous material. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging.

 

Niagara Cutter N76602 Carbide Chamfering Mill TiAlN Coated 4 Flutes 90 Degree Chamfer End 14 Cut Cutting Length 12 Diameter

Niagara Cutter N76602 Carbide Chamfering Mill, TiAlN Coated, 4 Flutes, 90 Degree Chamfer End, 1/4″ Cut Cutting Length, 1/2″ Diameter

Niagara Cutter N76602 Carbide Chamfering Mill, TiAlN Coated, 4 Flutes, 90 Degree Chamfer End, 1/4″ Cut Cutting Length, 1/2″ Diameter - Titanium aluminum nitride (tialn), combines high thermal stability with excellent hardness for abrasion resistance and a low coefficient of friction, for lubricity. Center cutting end mills are designed with “end teeth” making these ideal for slotting and cavity applications. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. 4 flute design for creating finer finishes and a highter metal removal rate. Features a fine-pitch rougher with chamfer.

 

Niagara Cutter N76597 Carbide Chamfering Mill TiAlN Coated 4 Flutes 60 Degree Chamfer End 516 Cut Cutting Length 38 Diameter

Niagara Cutter N76597 Carbide Chamfering Mill, TiAlN Coated, 4 Flutes, 60 Degree Chamfer End, 5/16″ Cut Cutting Length, 3/8″ Diameter

Niagara Cutter N76597 Carbide Chamfering Mill, TiAlN Coated, 4 Flutes, 60 Degree Chamfer End, 5/16″ Cut Cutting Length, 3/8″ Diameter - Features a fine-pitch rougher with chamfer. 4 flute design for creating finer finishes and a highter metal removal rate. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. Center cutting end mills are designed with “end teeth” making these ideal for slotting and cavity applications. Titanium aluminum nitride (tialn), combines high thermal stability with excellent hardness for abrasion resistance and a low coefficient of friction, for lubricity.

 

38 Chamfer End Mill Carbide - 10 pieces

3/8″ Chamfer End Mill Carbide – 10 pieces

3/8″ Chamfer End Mill Carbide – 10 pieces - Flutes, 2 perpendicular angle, 45° included angle, 90° shank diameter -. 45° chamfering end mill, made in the usa. 3750 (3/8) substrate, carbide.

 

Bassett MCH-2R Series Solid Carbide End Mill Uncoated Bright Finish 2 Flute 82 Degrees Profile Angle Chamfer End 18 Cutting Diameter 1-12 Length Pack of 1

Bassett MCH-2R Series Solid Carbide End Mill, Uncoated (Bright) Finish, 2 Flute, 82 Degrees Profile Angle, Chamfer End, 1/8″ Cutting Diameter, 1-1/2″ Length (Pack of 1)

Bassett MCH-2R Series Solid Carbide End Mill, Uncoated (Bright) Finish, 2 Flute, 82 Degrees Profile Angle, Chamfer End, 1/8″ Cutting Diameter, 1-1/2″ Length (Pack of 1) - Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. Round shanks allow use with a wide variety of toolholding systems. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Applicable for steel, cast iron, nonferrous material.

 

Niagara Cutter N76600 Carbide Chamfering Mill TiAlN Coated 4 Flutes 90 Degree Chamfer End 18 Cut Cutting Length 14 Diameter

Niagara Cutter N76600 Carbide Chamfering Mill, TiAlN Coated, 4 Flutes, 90 Degree Chamfer End, 1/8″ Cut Cutting Length, 1/4″ Diameter

Niagara Cutter N76600 Carbide Chamfering Mill, TiAlN Coated, 4 Flutes, 90 Degree Chamfer End, 1/8″ Cut Cutting Length, 1/4″ Diameter - Features a fine-pitch rougher with chamfer. Titanium aluminum nitride (tialn), combines high thermal stability with excellent hardness for abrasion resistance and a low coefficient of friction, for lubricity. 4 flute design for creating finer finishes and a highter metal removal rate. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. Center cutting end mills are designed with “end teeth” making these ideal for slotting and cavity applications.

 

Bassett MCH-2R Series Solid Carbide End Mill Uncoated Bright Finish 2 Flute 60 Degrees Profile Angle Chamfer End 06 Cutting Length 38 Cutting Diameter 2-12 Length Pack of 1

Bassett MCH-2R Series Solid Carbide End Mill, Uncoated (Bright) Finish, 2 Flute, 60 Degrees Profile Angle, Chamfer End, 0.6″ Cutting Length, 3/8″ Cutting Diameter, 2-1/2″ Length (Pack of 1)

Bassett MCH-2R Series Solid Carbide End Mill, Uncoated (Bright) Finish, 2 Flute, 60 Degrees Profile Angle, Chamfer End, 0.6″ Cutting Length, 3/8″ Cutting Diameter, 2-1/2″ Length (Pack of 1) - Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. Applicable for steel, cast iron, nonferrous material. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Round shanks allow use with a wide variety of toolholding systems.

 

Titan TC88110 Solid Carbide Chamfer Mill 4 Flute Double End 60 degree Angle AlTiN Coated 18 Size 18 Shank Diameter 2 Overall Length

Titan TC88110 Solid Carbide Chamfer Mill, 4 Flute, Double End, 60 degree Angle, AlTiN Coated, 1/8″ Size, 1/8″ Shank Diameter, 2″ Overall Length

Titan TC88110 Solid Carbide Chamfer Mill, 4 Flute, Double End, 60 degree Angle, AlTiN Coated, 1/8″ Size, 1/8″ Shank Diameter, 2″ Overall Length - Altin coated. Premium sub-microgran solid carbide. 4 flute double end. Made in usa.

 

Bassett MCH-2R Series Solid Carbide End Mill Uncoated Bright Finish 2 Flute 60 Degrees Profile Angle Chamfer End 045 Cutting Length 14 Cutting Diameter 2-12 Length Pack of 1

Bassett MCH-2R Series Solid Carbide End Mill, Uncoated (Bright) Finish, 2 Flute, 60 Degrees Profile Angle, Chamfer End, 0.45″ Cutting Length, 1/4″ Cutting Diameter, 2-1/2″ Length (Pack of 1)

Bassett MCH-2R Series Solid Carbide End Mill, Uncoated (Bright) Finish, 2 Flute, 60 Degrees Profile Angle, Chamfer End, 0.45″ Cutting Length, 1/4″ Cutting Diameter, 2-1/2″ Length (Pack of 1) - Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. Applicable for steel, cast iron, nonferrous material. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Round shanks allow use with a wide variety of toolholding systems.

 

Bassett MCH-4D Series Solid Carbide End Mill Uncoated Bright Finish 4 Flute 90 Degrees Profile Angle Chamfer End 058 Cutting Length 12 Cutting Diameter 3 Length Pack of 1

Bassett MCH-4D Series Solid Carbide End Mill, Uncoated (Bright) Finish, 4 Flute, 90 Degrees Profile Angle, Chamfer End, 0.58″ Cutting Length, 1/2″ Cutting Diameter, 3″ Length (Pack of 1)

Bassett MCH-4D Series Solid Carbide End Mill, Uncoated (Bright) Finish, 4 Flute, 90 Degrees Profile Angle, Chamfer End, 0.58″ Cutting Length, 1/2″ Cutting Diameter, 3″ Length (Pack of 1) - Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Applicable for steel, cast iron, nonferrous material. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. Round shanks allow use with a wide variety of toolholding systems.

 

Bassett MCH-4R Series Solid Carbide End Mill Uncoated Bright Finish 4 Flute 60 Degrees Profile Angle Chamfer End 084 Cutting Length 12 Cutting Diameter 3 Length Pack of 1

Bassett MCH-4R Series Solid Carbide End Mill, Uncoated (Bright) Finish, 4 Flute, 60 Degrees Profile Angle, Chamfer End, 0.84″ Cutting Length, 1/2″ Cutting Diameter, 3″ Length (Pack of 1)

Bassett MCH-4R Series Solid Carbide End Mill, Uncoated (Bright) Finish, 4 Flute, 60 Degrees Profile Angle, Chamfer End, 0.84″ Cutting Length, 1/2″ Cutting Diameter, 3″ Length (Pack of 1) - Applicable for steel, cast iron, nonferrous material. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Round shanks allow use with a wide variety of toolholding systems.