24 Coolest 4 Jaw Chucks

 

1-14 x 8 TPI Self-Centering 4-Jaw Chuck #ad

1-1/4″ x 8 TPI Self-Centering 4-Jaw Chuck

1-1/4″ x 8 TPI Self-Centering 4-Jaw Chuck #ad - Chuck body is chrome-plated to protect against corrosion while the jaws are anodized black. No disassembly or accessories are required to use the accompanying screw chuck, which has a 1-1/8″ long right hand thread. You’ll appreciate the following features wide range of jaw movement, quick action and a powerful grip in either expansion or contraction modes. Everything is secure in a fitted plastic storage/carrying case. Simply rotate the chuck’s outer ring in the opposite direction to firmly hold round stock between 1-5/8″ and 2-3/4″ or square billets 1-1/8″ to 2-1/8″ in size. Jaws will expand and grip in a 2-3″ dovetailed recess in the base of your turning. Expand the versatility of your lathe and mount your workpieces quicker and easier with the self-centering 4-jaw chuck. Comes complete with screw center, locking levers, t-handled hex wrench for jaw screws and 8 extra jaw screws.

 

Lathe Chuck 4-Jaw 4 with Adapter #ad

Lathe Chuck, 4-Jaw 4″ with Adapter

Lathe Chuck, 4-Jaw 4″ with Adapter #ad - This 4 inch 4-jaw independent chuck includes an adapter to fit the mini lathe spindle. This chuck has a 0. It includes a chuck key and reversible jaws. The adapter mounts to the spindle with three studs so additional holes in the spindle are not required. The chuck can hold work up to 3. 98″ (25 mm) through hole. 94″ (100 mm) in diameter.

 

Grizzly H7605 4 Jaw Chuck 3-Inch #ad

Grizzly H7605 4 Jaw Chuck, 3-Inch

Grizzly H7605 4 Jaw Chuck, 3-Inch #ad - Fits all wood lathes with 1-inch x 8 tpi spindles. Two 4-inch wrenches are included for final tightening. Setup is quick and easy by twisting the knurled adjustment plate on the back of the chuck. This self-centering style 4-jaw chuck has reversible stepped jaws for holding a variety of round or square work piece sizes.

 

34 x 16 TPI Self-Centering 4-Jaw Chuck #ad

3/4 x 16 TPI Self-Centering 4-Jaw Chuck

3/4 x 16 TPI Self-Centering 4-Jaw Chuck #ad - You’ll appreciate the following features wide range of jaw movement, quick action and a powerful grip in either expansion or contraction modes. Comes complete with screw center, locking levers, t-handled hex wrench for jaw screws and 8 extra jaw screws. Expand the versatility of your lathe and mount your workpieces quicker and easier with the self-centering 4-jaw chuck. Chuck body is chrome-plated to protect against corrosion while the jaws are anodized black. Jaws will expand and grip in a 2-3″ dovetailed recess in the base of your turning. Simply rotate the chuck’s outer ring in the opposite direction to firmly hold round stock between 1-5/8″ and 2-3/4″ or square billets 1-1/8″ to 2-1/8″ in size. Everything is secure in a fitted plastic storage/carrying case. No disassembly or accessories are required to use the accompanying screw chuck, which has a 1-1/8″ long right hand thread.

 

PSI CMG3C Mini Grip 4 Jaw Wood Lathe Chuck System #ad

PSI CMG3C Mini Grip 4 Jaw Wood Lathe Chuck System

PSI CMG3C Mini Grip 4 Jaw Wood Lathe Chuck System #ad - Adapts to both 3/4-inch-by-16 tpi and 1-by-8 tpi spindles, and contains 2 open/close levers. Basic straight jaws for 1-inch stock, square or round. Bonus jaws to hold dowels 1-1/2-to-2-3/8-inch to grip internally 2-to-3-inch. Flat jaws to handle bowls up to 5-inch diameter are available (#cjawfj1). Stepped jaws for small dowels 3/8-to-1-1/4-inch to grip internally 1-to-2-1/2-inch.

 

Grizzly G8784 4-Jaw Chuck for Round-Piece #ad

Grizzly G8784 4-Jaw Chuck for Round-Piece

Grizzly G8784 4-Jaw Chuck for Round-Piece #ad - Twist adjustment moves jaws concentrically from 2-inch to 2-3/4-inch odd. Specifications • size 1-inch • tpi 8. Chuck wrenches included. Perfect for bowl turning the jaws of this chuck grip round stock as well as expand within a recess turned in the back of the workpiece.

 

HHIP 3900-0415 4-Jaw Chuck Plain Back 5 #ad

HHIP 3900-0415 4-Jaw Chuck Plain Back, 5″

HHIP 3900-0415 4-Jaw Chuck Plain Back, 5″ #ad - 1 set of mounting screws included. Reversible individual adjusting jaws. 5″ 4-jaw chuck (plain back) made of high quality semi-steel. Adjusting wrench supplied. Hardened and ground.

 

HHIP 3900-3322 Backplate for 6 3 or 4 Jaw Chucks 2 14- 8 #ad

HHIP 3900-3322 Backplate for 6″ 3 or 4 Jaw Chucks, 2 1/4″- 8″

HHIP 3900-3322 Backplate for 6″ 3 or 4 Jaw Chucks, 2 1/4″- 8″ #ad - For 3 & 4-jaw chucks. Machining is required before mounting your chuck to ensure concentricity. Threaded 2 1/4-8 backplate/adapter for 6″ lathe chucks no bolt holes.

 

Steelex D3612 8-Inch 4-Jaw Chuck #ad

Steelex D3612 8-Inch 4-Jaw Chuck

Steelex D3612 8-Inch 4-Jaw Chuck #ad - Inside jaw minimum/maximum jaw openings are 394 to 3937 inches. Outside jaw minimum/maximum openings are 2480 to 7874 inches. Precision ground components. 8 inch 4-jaw plain back reversible jaws.

 

1075 - 25 4-Jaw Self-centering Chuck #ad

1075 – 2.5″ 4-Jaw Self-centering Chuck

1075 – 2.5″ 4-Jaw Self-centering Chuck #ad - Hold parts from 3/32 to 1-3/16 in regular position, to 2-1/4 with jaws reversed. Hardened steel reversible jaws. Includes two spindle bars for adjustment. 4 jaws hold round, square or tubular stock. Jaws scroll together when outer ring of chuck is turned for quick centering of material.

 

Sherline 1044 - 25 4-Jaw Chuck 34 - 16 Thread #ad

Sherline 1044 – 2.5″ 4-Jaw Chuck 3/4 – 16 Thread

Sherline 1044 – 2.5″ 4-Jaw Chuck 3/4 – 16 Thread #ad - The main disadvantage of the 4-jaw independent chuck is that the jaws must be individually set, adding considerable time to setups. (2) with the use of a dial indicator, they can be used to center parts with a great deal of accuracy. (4) they can clamp stock tighter. (1) they can be used to hold irregularly shaped parts. A hex key (provided) is used to tighten each jaw individually. (3) four-jaw chucks can be used to deliberately hold a part off-center. This is a valuable asset when machining cams, crankshafts, and similar parts. Tommy bars (also provided) are used in the holes in the side to tighten and loosen the chuck for more leverage. Four-jaw chucks have four advantages over three-jaw chucks. A groove is provided around the base of the chuck so that angle clamps can be used to mount it to the table of a mill as a holding fixture.

 

Grizzly G9866 8-Inch 4-Jaw Plain Back Independent Chuck #ad

Grizzly G9866 8-Inch 4-Jaw Plain Back Independent Chuck

Grizzly G9866 8-Inch 4-Jaw Plain Back Independent Chuck #ad - This is because each jaw moves independently and there is no scroll in the middle. Note that mounting holes through the back of the chuck. Requires mounting plate. Such 4-jaws chucks are used for holding odd shaped pieces or where zero tolerance is required. These 4-jaw chucks have semi-steel bodies and hardened reversible jaws. “Independent” means that each jaw moves independently.

 

Lathe Chuck 4-Jaw 3 #ad

Lathe Chuck, 4-Jaw 3″

Lathe Chuck, 4-Jaw 3″ #ad - This chuck has a 0. 87″ (22 mm) through hole. This set includes the 3 inch 4-jaw chuck, a chuck key, and reversible jaws. 15″ (80 mm) in diameter. It holds work up to 3.

 

NOVA 6014 75mm Bowl Chuck Accessory Jaw Set #ad

NOVA 6014 75mm Bowl Chuck Accessory Jaw Set

NOVA 6014 75mm Bowl Chuck Accessory Jaw Set #ad - Screws go right through the wall section to add more securing force where its needed most. Holding power for large bowls and also moderate hollow forms. Dovetail walls are 3 x thickness of conventional jaw for rugged work holding, great for larger and heavier bowls. Same jaw fixing system across all nova chuck models, total system interchangeability. Deep smooth walled dovetail holds wood gently but very firmly.

 

Multifunction 4 Jaw chuck Mini lathe Wooden bead machine Woodworking lathe 220V #ad

Multifunction 4 Jaw chuck Mini lathe Wooden bead machine Woodworking lathe 220V

Multifunction 4 Jaw chuck Mini lathe Wooden bead machine Woodworking lathe 220V #ad - 4 jaw chuck can clamp square and round wood. Dual speed motors, two-switch can be perforated polished honed polished wood beads carved-in-one. Small size, easy to carry, structural optimization, high quality stainless steel with 15mm thickness and strength greatly enhanced. Side of the motor has two heads, an installation tool to make beads, one can in turn be used to install the chuck polished beads. The electronic variable speed function, with power indicator easier to operate and control, low noise aluminum belt drive.

 

Steelex M1061 4 Jaw Chuck 6-Inch #ad

Steelex M1061 4 Jaw Chuck, 6-Inch

Steelex M1061 4 Jaw Chuck, 6-Inch #ad - 1-1/2-inch bore. 6-inch 4-jaw independent. Reversible jaws. Plain back.

 

BISON 4 Jaw Plain Back Independent Lathe Chuck - Number OF JAWS 4 CHUCK SIZE 6 #ad

BISON 4 Jaw Plain Back Independent Lathe Chuck – Number OF JAWS: 4 CHUCK SIZE: 6″

BISON 4 Jaw Plain Back Independent Lathe Chuck – Number OF JAWS: 4 CHUCK SIZE: 6″ #ad - Jaws are individually adjustable, allowing firm gripping of odd shaped work. Chuck bodies are semi-steel. Thrust bearings and operating screws are made of case hardened steel. Jaws are made of high quality carbon steel and hardened. Spindle 165″.

 

Steelex D3613 10-Inch 4-Jaw Chuck #ad

Steelex D3613 10-Inch 4-Jaw Chuck

Steelex D3613 10-Inch 4-Jaw Chuck #ad - Outside jaw minimum/maximum openings are 3150 to 9843 inches. Precision ground components. 10 inch 3-jaw plain back reversible jaws. Inside jaw minimum/maximum jaw openings are 591 to 5118 inches.

 

Woodstock M1028 4 Jaw Chuck for M1015 #ad

Woodstock M1028 4 Jaw Chuck for M1015

Woodstock M1028 4 Jaw Chuck for M1015 #ad - Fits m1015. Reversible jaws.

 

Shop Fox D3754 Small 4-Jaw Chuck with Plate #ad

Shop Fox D3754 Small 4-Jaw Chuck with Plate

Shop Fox D3754 Small 4-Jaw Chuck with Plate #ad - 9/16-inch center hole. Mounting clamps, t-nuts and bolts included. 2-3/4-inch diameter. 4 slots for 1/4-inch stud.

 

Hurricane Turning Tools HTC100 4-Inch Woodturning 4 Jaw Chuck Kit with Dovetail Jaws for Wood Lathes with 1 14 x 8-Inch TPI Spindles #ad

Hurricane Turning Tools HTC100 4-Inch Woodturning 4 Jaw Chuck Kit with Dovetail Jaws for Wood Lathes with 1 1/4 x 8-Inch TPI Spindles

Hurricane Turning Tools HTC100 4-Inch Woodturning 4 Jaw Chuck Kit with Dovetail Jaws for Wood Lathes with 1 1/4 x 8-Inch TPI Spindles #ad - It is a great size for full-size / midi and mini lathes. Many optional jaw sets are available (sold separately) for various woodturning applications. If you are looking for a massive chuck for medium to super large bowls, check out the htc125 5″ chuck in our amazon store. This is an outstanding quality chuck that compares to some of the “famous names” on the market. This is a 4″ chuck which compares in size to the oneway talon, novatech, etc chucks. Please note that this chuck is the smaller in size of the two hurricane chucks. It provides a superb grip on your woodturning projects such as bowls and platters. We would like to introduce you to the hurricane htc100 100mm 4 jaw self centering woodturning chuck. It is perfect if you only want one chuck and you switch between a mini lathe and a full size lathe. Available in several spindle threads to suit almost all lathes.

 

SANOU 4 Jaw Self-centering Chuck K12-80 3 inch 4 jaws Chuck Machine Tool Lathe Chuck #ad

SANOU 4 Jaw Self-centering Chuck K12-80 3″ inch 4 jaws Chuck Machine Tool Lathe Chuck

SANOU 4 Jaw Self-centering Chuck K12-80 3″ inch 4 jaws Chuck Machine Tool Lathe Chuck #ad - Give a jinslu logo welding gauge as gift. Two sets of jaws 1set internal jaw and 1 set external jaw.

 

Grizzly H6268 1-Inch Pin Jaws For 4 Jaw Chuck #ad

Grizzly H6268 1-Inch Pin Jaws For 4 Jaw Chuck

Grizzly H6268 1-Inch Pin Jaws For 4 Jaw Chuck #ad - Pin jaws are designed for mounting bowls by expanding into a recess inside the bottom of the workpiece. A dovetailed lip grips the workpiece securely for safe and confident turning. . Fits a 1″ diameter recess.

 

1 x 8 TPI Self-Centering 4-Jaw Chuck #ad

1″ x 8 TPI Self-Centering 4-Jaw Chuck

1″ x 8 TPI Self-Centering 4-Jaw Chuck #ad - Everything is secure in a fitted plastic storage/carrying case. No disassembly or accessories are required to use the accompanying screw chuck, which has a 1-1/8″ long right hand thread. Chuck body is chrome-plated to protect against corrosion while the jaws are anodized black. You’ll appreciate the following features wide range of jaw movement, quick action and a powerful grip in either expansion or contraction modes. . Jaws will expand and grip in a 2-3″ dovetailed recess in the base of your turning. Comes complete with screw center, locking levers, t-handled hex wrench for jaw screws and 8 extra jaw screws. Expand the versatility of your lathe and mount your workpieces quicker and easier with the self-centering 4-jaw chuck. Simply rotate the chuck’s outer ring in the opposite direction to firmly hold round stock between 1-5/8″ and 2-3/4″ or square billets 1-1/8″ to 2-1/8″ in size.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.