25 Best and Coolest Strong Hand Tools for 2020

 

Strong hand Tools PE10 Expand-O Pliers 10-Inch #ad

Strong hand Tools PE10 Expand-O Pliers, 10-Inch

Strong hand Tools PE10 Expand-O Pliers, 10-Inch #ad - Unique, reverse-action clamping and spreading pliers. Bottom adjustable magnetic v-pad holds pliers in place. The two v-pads instantly adjust to round or flat surfaces. One magnetic v-pad, one standard v-pad. Jaws move in opposite directions to push against two surfaces.

 

Strong Hand Tools 4-in-1 Clamp Kit UD65-C3 #ad

Strong Hand Tools 4-in-1 Clamp Kit, UD65-C3

Strong Hand Tools 4-in-1 Clamp Kit, UD65-C3 #ad - Removable / reversible clamp arm. Versatile 3 pc clamping kit tapped hole 5/16-18 (m8). One clamp, four functions. Tapped jaw hole for adding extender block and v-pad.

 

Strong Hand Tools 4-in-1 Sliding Arm Clamp Kit - 125in #ad

Strong Hand Tools 4-in-1 Sliding Arm Clamp Kit – 12.5in

Strong Hand Tools 4-in-1 Sliding Arm Clamp Kit – 12.5in #ad - The economical 4-in-1 clamp adapts to serve four different functions 1 standard clamping 2 pipe clamping 3 spreader clamping 4 step-over clamping. The 4-in-1 clamp features the removable / reversible clamp arm and a threaded hole in the jaw for the addition of the unique v-pad and extender block accessories. 1 clamp 4 functions. The sliding arm quickly slides into position against your workpiece. For standard clamping, the 4-in-1 clamp is 10x faster than a c-clamp.

 

Strong hand Tools PTTD634 Drill Press Clamp with Crank Handle #ad

Strong hand Tools PTTD634 Drill Press Clamp with Crank Handle

Strong hand Tools PTTD634 Drill Press Clamp with Crank Handle #ad - Pre-set the plier opening for repetitous clamping applications. Drill press clamps quickly lock and release, making them ideal for repetitous clamping. Use the handle crank to increase torque.

 

Strong Hand Tools MagRest V-Pad Kit 4 Piece Kit 2 x XDV32 x XFV3 MVDF42 #ad

Strong Hand Tools, MagRest V-Pad Kit, 4 Piece Kit, (2 x XDV3)(2 x XFV3), MVDF42

Strong Hand Tools, MagRest V-Pad Kit, 4 Piece Kit, (2 x XDV3)(2 x XFV3), MVDF42 #ad - Pull force 9 lb. Pull force 6 lb. Magnets on the bottom only. 2″)xdv3 (max. Xfv3 (max. )(Length 2. )(length 2″).

 

Strong hand Tools Light Duty Utility Clamp with Capacity 500 Lb Pressure 45 #ad

Strong hand Tools, Light Duty Utility Clamp with Capacity 500 Lb Pressure, 4.5″

Strong hand Tools, Light Duty Utility Clamp with Capacity 500 Lb Pressure, 4.5″ #ad - Clamping pressure 500lbs. Capacity 4-1/2″. Throat depth 3-1/4″. Tapped hole 5/16-18. Rail size 5/8″ x 5/16″.

 

Strong Hand Tools Grasshopper Welding Finger AGH230 #ad

Strong Hand Tools, Grasshopper Welding Finger, AGH230

Strong Hand Tools, Grasshopper Welding Finger, AGH230 #ad - No other device can do what the grasshopper does brass tip + magnetic v-pad base with max. Steady small parts, such as bolts, nuts, and thin plates for tack welding at odd angles with full welding clearance. Pull force 35 lbs.

 

Strong Hand Tools Adjustable Magnetic V-Pads 4 Piece Kit 2 pcs 222 pcs 34 #ad

Strong Hand Tools, Adjustable, Magnetic V-Pads, 4 Piece Kit (2 pcs. 2.2″)(2 pcs. 3.4″)

Strong Hand Tools, Adjustable, Magnetic V-Pads, 4 Piece Kit (2 pcs. 2.2″)(2 pcs. 3.4″) #ad - Magnets on the pad face only. 2 pcs 2 2″ v-pads (xfv2) 2 pcs 3 4″ v-pads (xnv2). Light duty & tight spot holding build, hold, and position steel. Time saving magnetic tools for use in the shop & in the field. Hold and position round, flat, and square parts in light duty substructure applications.

 

Strong Hand Tools Heavy Duty Adjust-O Magnet Square OnOff Switches Pull Force 65 lbs 4-38 x 3-34 x 1-18 MSA46-HD #ad

Strong Hand Tools, Heavy Duty, Adjust-O Magnet Square, On/Off Switches, Pull Force: 65 lbs, 4-3/8″ x 3-3/4″ x 1-1/8″, MSA46-HD

Strong Hand Tools, Heavy Duty, Adjust-O Magnet Square, On/Off Switches, Pull Force: 65 lbs, 4-3/8″ x 3-3/4″ x 1-1/8″, MSA46-HD #ad - Easy to clean simply turn off and wipe. Turn the magnet off when setting up, turn on when you’re ready to work fast and safe set-up. Dimension 4-3/8 x 3-3/4 x 1-1/8″ (111 x 95 x 29 mm). Ideal for round and square tubing, angle, and flat stock. The fast & easy way to hold metal work pieces at 45 degree & 90 degree. Max pull force 90 lbs (40 kg).

 

Strong Hand Tools MagTab Adjustable Magnetic Tab Holder Twin Pack MFT10  MNT15 #ad

Strong Hand Tools, MagTab, Adjustable Magnetic Tab Holder, Twin Pack (MFT10 + MNT15)

Strong Hand Tools, MagTab, Adjustable Magnetic Tab Holder, Twin Pack (MFT10 + MNT15) #ad - The better, faster way to hold tabs in place for tack welding. The adjustable magnetic v-shape base adjusts for different shapes round, flat, angle metal surfaces. Hold tabs, gussets, plates and odd shaped pieces in position for tack welding.

 

Strong Hand Tools Locking C-Clamps Swivel Tip Throat Depth 3-14Opening 4 #ad

Strong Hand Tools, Locking C-Clamps, Swivel Tip, (Throat Depth 3-1/4″)(Opening 4″)

Strong Hand Tools, Locking C-Clamps, Swivel Tip, (Throat Depth 3-1/4″)(Opening 4″) #ad - Large adjustment screw with a hole for easy torque. Made of heat treated steel and nickel/chrome plated for strength and durability updated features help you work quickly, safely and efficiently. Vinyl coated release handles made for comfort and ease. Made of heat treated steel and nickel/chrome plated for strength and durability.

 

Strong Hand Tools Shark Clamp T-Handle 5 Capacity 1000 Lbs Pressure SC50 #ad

Strong Hand Tools, Shark Clamp, T-Handle, 5″ Capacity, 1,000 Lbs Pressure, SC50

Strong Hand Tools, Shark Clamp, T-Handle, 5″ Capacity, 1,000 Lbs Pressure, SC50 #ad - Mouth opening 5″. Swivel pads tolerate uneven thicknesses. Clamp pressure 1,000 lbs. Scissor action with floating grip pads will hold odd shaped parts accurately. Quick-set hold down clamps pivoting, hinged arms provide a wide opening inside serrations hold workpieces securely fast set-ups, just hold the button down and pull-push the handle to desired clamping position, release the button and turn the handle to tighten.

 

Strong hand Tools SC50A Shark Clamp with Straight Handle No Twist Clamp and 300-Pound Pressure with 5-Inch Opening #ad

Strong hand Tools SC50A Shark Clamp with Straight Handle No Twist Clamp and 300-Pound Pressure with 5-Inch Opening

Strong hand Tools SC50A Shark Clamp with Straight Handle No Twist Clamp and 300-Pound Pressure with 5-Inch Opening #ad - The shark clamp from strong hand tools has pivoting, hinged arms that provide a wide opening. Its inside serrations hold workpieces securely.

 

Strong Hand Tools MagTab Jumbo Magnetic Tab Holder MNT15 #ad

Strong Hand Tools, MagTab Jumbo Magnetic Tab Holder, MNT15

Strong Hand Tools, MagTab Jumbo Magnetic Tab Holder, MNT15 #ad - The better, faster way to hold tabs in place for tack welding. Stronger for larger parts. Hold tabs, gussets, plates and odd shaped pieces in position for tack welding.

 

Strong Hand Tools Table Edge Tig Torch Rest MRT50 #ad

Strong Hand Tools, Table Edge Tig Torch Rest, MRT50

Strong Hand Tools, Table Edge Tig Torch Rest, MRT50 #ad - Removable/ reversible clamp arm. Versatile 3 pc clamping kit. Tapped jaw hole for adding extender block and v-pad. When every inch of space on your work surface is utilized, the table edge gun rest holds your torch at the table edge, out-of three-way, yet easy to access quickly.

 

Strong Hand Tools 4-IN-1 Clamp Accessory Kit Fits UF UG Series #ad

Strong Hand Tools, 4-IN-1 Clamp Accessory Kit (Fits UF & UG Series)

Strong Hand Tools, 4-IN-1 Clamp Accessory Kit (Fits UF & UG Series) #ad - For use, uf, rug models. Convert all utility clamps into 4-in-1 clamps. The 4-in-1 accessory kit includes v-pad, extender block, screw.

 

Strong Hand Tools MagTab Adjustable Magnetic Tab Holder Single Pack - MFT10 #ad

Strong Hand Tools, MagTab, Adjustable Magnetic Tab Holder, Single Pack – MFT10

Strong Hand Tools, MagTab, Adjustable Magnetic Tab Holder, Single Pack – MFT10 #ad - The better, faster way to hold tabs in place for tack welding. The adjustable magnetic v-shape base adjusts for different shapes round, flat, angle metal surfaces. 6-pc magnets ea. Hold tabs, or any small metal pieces, parallel or perpendicular to the substructure.

 

Strong hand Tools UE85 Medium Duty Utility Clamp with Capacity 850-Pound Pressure 85-Inch #ad

Strong hand Tools UE85 Medium Duty Utility Clamp with Capacity 850-Pound Pressure, 8.5-Inch

Strong hand Tools UE85 Medium Duty Utility Clamp with Capacity 850-Pound Pressure, 8.5-Inch #ad - Clamping pressure 850lbs. Rail size 25/32″ x 3/8″. Tapped hole 3/8-16. Capacity 8-1/2″. Throat depth 4″.

 

Strong Hand Tools Sliding Arm Clamp - 205in Model UM205 #ad

Strong Hand Tools Sliding Arm Clamp – 20.5in, Model# UM205

Strong Hand Tools Sliding Arm Clamp – 20.5in, Model# UM205 #ad - Economical 4-in-1 clamp adapts to serve four different functions 1) standard clamping 2) pipe clamping 3) spreader clamping 4) step-over clamping. 1 clamp 4 functions. Threaded hole in the jaw allows for the addition of the unique v-pad and extender block accessories. For standard clamping, the 4-in-1 clamp is 10x faster than a c-clamp. Removable / reversible clamp arm.

 

Strong Hand Tools BuildPro 38-Piece Modular Fixturing Kit - Model Number TMK510 #ad

Strong Hand Tools BuildPro 38-Piece Modular Fixturing Kit – Model Number TMK510

Strong Hand Tools BuildPro 38-Piece Modular Fixturing Kit – Model Number TMK510 #ad - 4 magnetic rest buttons can be used anywhere on the tabletop to elevate work pieces at 045in height increments. 38-piece kit includes12 ball lock bolts that engage under the table to position and hold clamps and accessories. 4 inserta clamps instantly lock into place when inserted in any of the 5/8in holes on the buildpro tabletop. 2 magnetic mount threaded adapters convert any hole on the table into a 3/8-16 or 1/2-13 threaded hole. 10 straight edge stops with long slots for flexibility in fixturing and squaring up parts.

 

Strong Hand Tools Long Nose Pliers Overall Length 8 #ad

Strong Hand Tools, Long Nose Pliers (Overall Length 8″)

Strong Hand Tools, Long Nose Pliers (Overall Length 8″) #ad - Secure adjustment bar minimizes bar pop-outs. Unique crank handle for fast, easy jaw opening and pressure adjustment. Quick release trigger. Non-slip grip marks on top and bottom jaws for positive gripping. Crank up, or lessen the torque by inserting a screwdriver.

 

Anyren 4PCS Welding Fixture Adjustable Magnetic Welding Tongs V Pads Mounting Bracket Hand Tool Strong Welder Clamps Holder Suspender #ad

Anyren 4PCS Welding Fixture, Adjustable Magnetic Welding Tongs V Pads Mounting Bracket Hand Tool Strong Welder Clamps Holder Suspender

Anyren 4PCS Welding Fixture, Adjustable Magnetic Welding Tongs V Pads Mounting Bracket Hand Tool Strong Welder Clamps Holder Suspender #ad - ▶Made of stainless steel material, durable and reliable. ▶V shape magnetic welding fixture, strong pull force. ▶Easy to install and apply. ▶Widely used on doors, tool boxes, windows, wooden case, furniture, equipment, etc. ▶strong hand tools, adjustable magnetic tab holder, adjustable, magnetic v-pads, 4 piece kit.

 

Strong Hand Tools 4-in-1 Clamp Kit Deep Throat #ad

Strong Hand Tools, 4-in-1 Clamp Kit (Deep Throat)

Strong Hand Tools, 4-in-1 Clamp Kit (Deep Throat) #ad - Versatile 3 pc clamping kit. One clamp, four functions. Removable/ reversible clamp arm. Tapped jaw hole for adding extender block and v-pad.

 

Strong Hand Tools Mini Magnetic Multi Angle Squares Twin Pack 2-516 x 2 x 58 MS346AT #ad

Strong Hand Tools, Mini Magnetic Multi Angle Squares, Twin Pack, (2-5/16″ x 2″ x 5/8″), MS346AT

Strong Hand Tools, Mini Magnetic Multi Angle Squares, Twin Pack, (2-5/16″ x 2″ x 5/8″), MS346AT #ad - Center hole for easy handling. Holding at multiple angles while soldering, brazing, and welding at 30, 45, 60, and 90. The compact size of the mini magnets makes it easy to pack, store, and carry for use anywhere. Accurate 30, 45, 60, 90 angles.

 

Strong Hand Tools Adjust-O 90° Dual Switch High Magnetic Welding Fabrication Square 6 Wide x 1-12 Deep x 6 #ad

Strong Hand Tools, Adjust-O 90°, Dual Switch, High Magnetic Welding & Fabrication Square, 6″ Wide x 1-1/2″ Deep x 6″

Strong Hand Tools, Adjust-O 90°, Dual Switch, High Magnetic Welding & Fabrication Square, 6″ Wide x 1-1/2″ Deep x 6″ #ad - 120 pull force. Angle magnet squares with the convenience of on/off switches. Two on/off switches for independent operation. Precision machined flat and v-surfaces are ideal for round and square tubing, angle, and flat stock. Turn the magnets off when setting up, turn on when you’re ready to work easy and safe set-up.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.