25 Coolest Skew Chisels in 2019

 

Sorby B809253 Oval Skew Chisel 1-Inch #ad

Sorby B809253 Oval Skew Chisel, 1-Inch

Sorby B809253 Oval Skew Chisel, 1-Inch #ad - Delicately balanced skew chisels feature oval profiles for gliding effortlessly along the tool rest for smoothing cylinders, cleaning end grain and cutting shallow curves, beads, pummels and v-cuts. Size 1″.

 

34 Robert Sorby 810H Skew Chisel #ad

3/4″ Robert Sorby #810H Skew Chisel

3/4″ Robert Sorby #810H Skew Chisel #ad - Made in england. Skews are superb for large spindle work, such as kitchen table legs or newel posts. 3/4″ skew has a 10″ handle with an overall length of 16-1/4″. Rectangular section profile gives it more weight. Standard tip grind. It’s a miracle on an ash handle.

 

34 Robert Sorby 810 Skew Chisel Blade #ad

3/4″ Robert Sorby #810 Skew Chisel Blade

3/4″ Robert Sorby #810 Skew Chisel Blade #ad - The robert sorby standard skew blade is for turners who prefer to make their own turning tool handles, or for use in sorby’s sovereign system handles. A tang collet adapter (#85406) is required for use with the sovereign system. Standard tip grind. Superb for large spindle work, such as kitchen table legs or newel posts. High speed steel (hss) blade is 1/4″ thick. Scraper is tanged at one end and measures approximately 8″ long overall. Made in england. Rectangular section profile gives it more weight.

 

Crown 2222 No2 18-Inch 3-mm Skew Chisel #ad

Crown 2222 No.2 1/8-Inch 3-mm Skew Chisel

Crown 2222 No.2 1/8-Inch 3-mm Skew Chisel #ad - Rosewood handle. Finest carbon steel. Exceptional quality tools from crown hand tools ltd, sheffield, england. Rockwell hardness 57/60.

 

12 Robert Sorby 809H Oval Skew Chisel #ad

1/2″ Robert Sorby 809H Oval Skew Chisel

1/2″ Robert Sorby 809H Oval Skew Chisel #ad - Handles are made from super hard european hornbeam. Bevel ground at 30 degree skew and a 25 degree bevel. Blades are made from fine-grained, nicely tempered chrome-manganese steel and hardened to rc 59. Contains both right and left skew chisel 26 mm 1 1/16″ wide. Made by a small tool manufacturer in the czech republic.

 

12 Robert Sorby 810H Skew Chisel #ad

1/2″ Robert Sorby #810H Skew Chisel

1/2″ Robert Sorby #810H Skew Chisel #ad - This 6 piece carving set is manufactured by small tool maker in czech republic. All chisels blades are made from hardened highly allowed cr-mn steel and heat treated to hrc 55. Set includes straight skew, curved straight, 2 curves skews, curves v tool and curved gouge. Comes in retail packaging. Handles are oiled european beech with ergonomic octagonal cross section.

 

Narex Lathe Wood Turning Double Bevel Skew Chisel 4 mm x 14 mm x 105 mm Blade Alloyed Tool Steel 60 HRc 817110 #ad

Narex Lathe Wood Turning Double Bevel Skew Chisel 4 mm x 14 mm x 105 mm Blade Alloyed Tool Steel 60 HRc 817110

Narex Lathe Wood Turning Double Bevel Skew Chisel 4 mm x 14 mm x 105 mm Blade Alloyed Tool Steel 60 HRc 817110 #ad - This lathe tool is made by a small tool manufacturer in the czech republic. Handles are natural varnished european beech wood. Straight chisel blade is 4 mm (3/16″) thick by 14 mm (9/16″) wide by 105 mm (425″) long. Overall length of tool is 345 mm (14″). Blades are heat treated allow tool steel and hardened to hrc 60 and will hold an excellent edge.

 

Crown 250W 34-Inch Oval Skew Chisel #ad

Crown 250W 3/4-Inch Oval Skew Chisel

Crown 250W 3/4-Inch Oval Skew Chisel #ad - Lasts up to 6 times as long as carbon tools. Made with heavy duty brass ferrules. High speed steel. Exceptional quality tools from crown hand tools ltd, sheffield, england. Rockwell 62/64.

 

12 Robert Sorby 809H Oval Skew Chisel #ad

1/2″ Robert Sorby #809H Oval Skew Chisel

1/2″ Robert Sorby #809H Oval Skew Chisel #ad - Designed by sorby, the profile allows the tool to glide effortlessly along the tool rest without fear of the edges catching on the rest. 1/2″ tool has a handle length of 10″ and an overall length of 16-3/4″. Ash handle. A delicately balanced tool that is the “plane” of a turner’s tool kit. It will smooth cylinders, clean the end grain of spindles, and cut shallow curves, beads, pummels, and v-cuts. Made in england. Indispensable when a fine finish is required from the tool.

 

Robert Sorby Micro Skew Chisel Blade #ad

Robert Sorby Micro Skew Chisel Blade

Robert Sorby Micro Skew Chisel Blade #ad - Rosewood handle. Gives up to 6 times the edge life of carbon tools. Exceptional quality tools from crown hand tools ltd, sheffield, england. Made from m2 high speed steel (rockwell 62/64).

 

Narex Pair Right Left 6 mm 14 Skew Paring Chisels in Wooden Presentation Box 851656 #ad

Narex Pair Right & Left 6 mm 1/4″ Skew Paring Chisels in Wooden Presentation Box 851656

Narex Pair Right & Left 6 mm 1/4″ Skew Paring Chisels in Wooden Presentation Box 851656 #ad - Packaged in a wooden presentation box. Handles made from super hard european hornbeam. Blades are made from fine-grained, nicely tempered chrome-manganese steel and hardened to rc 59. Contains both right and left skew chisel 6 mm 1/4″ wide. Bevel ground at 30 degree skew and a 25 degree bevel.

 

PFEIL Swiss Made 1 Double Bevel Skew Chisel 8mm #ad

PFEIL “Swiss Made” #1 Double Bevel Skew Chisel, 8mm

PFEIL “Swiss Made” #1 Double Bevel Skew Chisel, 8mm #ad - “Swiss made” implies reliability and precision. Pfeil is undoubtedly the finest carving tool on the market, second-to-none in terms of manufacturing quality and durability. This skew-cut profile chisel is a double beveled grind with two rounded heels that allow the rocking motion necessary in controlling depth of cut. Pfeil carving tools and sets are “swiss made”.

 

Crown 270APM 34-Inch 19-mm Powder Metallurgy Skew Chisel #ad

Crown 270APM 3/4-Inch 19-mm Powder Metallurgy Skew Chisel

Crown 270APM 3/4-Inch 19-mm Powder Metallurgy Skew Chisel #ad - Hardened to between 66-degrees and 69-degrees rockwell. Black ash handle. Lasts 4-5 times longer than conventional high speed tools. The ‘elite’ line of quality tools from crown hand tools ltd, sheffield, england.

 

1-14 Robert Sorby 809H Oval Skew Chisel #ad

1-1/4″ Robert Sorby #809H Oval Skew Chisel

1-1/4″ Robert Sorby #809H Oval Skew Chisel #ad - Blades are made from fine-grained, nicely tempered chrome-manganese steel and hardened to rc 59. Handles mades from super hard european hornbeam. Bevel ground at 30 degree skew and a 25 degree bevel. Made by a small tool manufacturer in the czech republic. Contains both right and left skew chisel 12 mm 1/2″ wide.

 

Carter Son Toolworks ½ Skew Chisel #ad

Carter & Son Toolworks ½” Skew Chisel

Carter & Son Toolworks ½” Skew Chisel #ad - Can sharpen easily by grinding on the flat surface. Unique profile allows for smooth non-binding cutting with ultimate control. 1/2-inch chisel with 7-inch handle and 5-inch blade. 3/4-inch chisel with 9-inch handle and 6-inch blade. The m2 high speed steel blades outlasts high carbon steel 6-to-1, and will give you years of use.

 

Narex 6 Piece Set Carving Chisels curved skews curved straight curved V Tool and straight skew chisel 894710 #ad

Narex 6 Piece Set Carving Chisels curved skews, curved straight, curved V Tool and straight skew chisel 894710

Narex 6 Piece Set Carving Chisels curved skews, curved straight, curved V Tool and straight skew chisel 894710 #ad - Comes in retail packaging. This 6 piece carving set is manufactured by small tool maker in czech republic. All chisels blades are made from hardened highly allowed cr-mn steel and heat treated to hrc 55. Handles are oiled european beech with ergonomic octagonal cross section. Set includes straight skew, curved straight, 2 curves skews, curves v tool and curved gouge.

 

Chris Pye - Auriou Straight Skew Chisel Width 10 Mm #ad

Chris Pye – Auriou Straight Skew Chisel Width 10 Mm

Chris Pye – Auriou Straight Skew Chisel Width 10 Mm #ad - Allongee style of blade splays from the shoulder they are lighter to use. Chris pye, auriou straight skew chisel width 10 mm. Hand forged by beating out a blank of steel creates a very resilient grain structure. Made in france.

 

Set of Skew Chisels Ø 06 mm 024 inch - 2 pcs - in wooden box #ad

Set of Skew Chisels Ø 06 mm (0.24 inch) – 2 pcs – in wooden box

Set of Skew Chisels Ø 06 mm (0.24 inch) – 2 pcs – in wooden box #ad - It can withstand heavy blows with a mallet. The ergonomic handle is made of hard and hefty hornbeam wood. The forged blade is made of traditional cr-mn steel and is heat treated to 59 hrc.

 

Standard Skew Chisel 1 14 #ad

Standard Skew Chisel 1 1/4″

Standard Skew Chisel 1 1/4″ #ad - The robert sorby standard skew chisels are superb for large spindle work e. G. Newel posts and kitchen table legs.

 

14 Robert Sorby 540 Sheaf River Left Skew Chisel #ad

1/4″ Robert Sorby #540 Sheaf River Left Skew Chisel

1/4″ Robert Sorby #540 Sheaf River Left Skew Chisel #ad - The angled point of this 1/4″ left skew edge bench chisel from robert sorby makes it ideal for getting into corners and tight quarters, precisely paring joints, particularly dovetails, and other detailed finshing work it is capable of shearing through the toughest wood, especially tough end grain or unruly figured grain, with less fuss and less effort than a regular bench chisel. Made in england as part of sorby’s sheaf river line, this chisel is manufactured from the finest sheffield steel, with enduring attention to detail, each blade of sorby’s sheaf river chisel series is made from a drop stamped, high carbon blank incorporating a specially formulated alloy to ensure a perfect balance of steel strength and edge retention. This exceptional material allows blades to be sharpened to 0. Each chisel is also diamond hardness tested, guaranteeing not one single tool leaves the factory without inspection. The handles are made from certified sustainable american ash, combining high tensile strength and resilience with long-term timber sustainability and availability. Chisels have 5-5/8″ long blades (including bolster) and 4-3/4″ handles, for an overall length of approximately 10-3/8″. Though sold individually, most users typically buy skew chisels in pairs ( one left, one right). The rounded handle is matched to tapered bolster and ferrule for a clean, elegant look, and a very comfortable feel in use. 5 of micron, four times sharper than a disposable razor. Named after the river sheaf, sheffield’s endearing testimony to the steel industry, these bench chisels have been designed with environmental considerations at heart, while still maintaining the same legendary robert sorby quality.

 

14 Skew Chisel #ad

1/4″ Skew Chisel

1/4″ Skew Chisel #ad - The design of the tool keeps your fingers close to the cutting edge and the half-round palm-grip handle features a flat spot that keeps it from rolling off your bench. Overall length of the tools is 4-3/4″. Factory sharpened and ready for use. This 1/4″ skew chisel features a hardwood handle with a metal ferrule.

 

Narex Right Left 12 mm 12 Skew Paring Chisels 81112811162 #ad

Narex Right & Left 12 mm 1/2″ Skew Paring Chisels 81112/811162

Narex Right & Left 12 mm 1/2″ Skew Paring Chisels 81112/811162 #ad - Blades are made from fine-grained, nicely tempered chrome-manganese steel and hardened to rc 59. Handles mades from super hard european hornbeam. Bevel ground at 30 degree skew and a 25 degree bevel. Contains both right and left skew chisel 12 mm 1/2″ wide. Made by a small tool manufacturer in the czech republic.

 

Standard Skew Chisel 1 #ad

Standard Skew Chisel 1″

Standard Skew Chisel 1″ #ad - . The robert sorby standard skew chisels are superb for large spindle work e. G. Newel posts and kitchen table legs.

 

Crown 249 12-Inch Oval Skew Chisel #ad

Crown 249 1/2-Inch Oval Skew Chisel

Crown 249 1/2-Inch Oval Skew Chisel #ad - Gives up to 6 times the edge life of carbon tools. Made from m2 high speed steel (rockwell 62/64). Beech handle. Exceptional quality tools from crown hand tools ltd, sheffield, england.

 

Hurricane Woodturning Large Skew Chisel 1 12 Wide High Speed Steel w Handle HTT-119 #ad

Hurricane Woodturning Large Skew Chisel, 1 1/2″ Wide, High Speed Steel w Handle, HTT-119

Hurricane Woodturning Large Skew Chisel, 1 1/2″ Wide, High Speed Steel w Handle, HTT-119 #ad - This tool is from the hurricane standard series and is a great choice for beginning and intermediate woodturners. They are made out of high speed steel for superior edge holding ability and will last 8x longer between sharpenings as compared to carbon steel. The handles are made from solid ash. In addition to the high quality steel, hurricane turning tools have extra long handles, some as long at 16 inches. This is a large 1 1/2 ” wide woodturning skew chisel made from 3/8″ thick high speed steel. It is a serious tool for heavy duty work like peeling down spindles quickly. Hurricane turning tools have become one of the leading brands of woodturning tools. Ships ready for you to final sharpen. Compare these tools to others that sell for 2 to 3 times the price. These tools compare with any hss tool on the market and are sold throughout the world.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.