Best 15 Spot Drill Bits

 

Magafor 888196H0500  Hard-X Carbide Spot Drill Bit 120 Degree 5 mm

Magafor 888196H0500 Hard-X Carbide Spot Drill Bit, 120 Degree, 5 mm

Magafor 888196H0500 Hard-X Carbide Spot Drill Bit, 120 Degree, 5 mm - Easy installation. 5mm hard-x 120 carbide spot drill. The product is manufactured in france.

 

Magafor 888196H0400  Hard-X Carbide Spot Drill Bit 120 Degree 4 mm

Magafor 888196H0400 Hard-X Carbide Spot Drill Bit, 120 Degree, 4 mm

Magafor 888196H0400 Hard-X Carbide Spot Drill Bit, 120 Degree, 4 mm - Easy installation. The product is manufactured in france. 4mm hard-x 120 carbide spot drill.

 

Magafor 888195H0400  Hard-X Carbide Spot Drill Bit 90 Degree 5 mm

Magafor 888195H0400 Hard-X Carbide Spot Drill Bit, 90 Degree, 5 mm

Magafor 888195H0400 Hard-X Carbide Spot Drill Bit, 90 Degree, 5 mm - The product is manufactured in france. Easy installation. 4mm hard-x 90 carbide spot drill.

 

Magafor 888196H0952  Hard-X Carbide Spot Drill Bit 120 Degree 38

Magafor 888196H0952 Hard-X Carbide Spot Drill Bit, 120 Degree, 3/8″

Magafor 888196H0952 Hard-X Carbide Spot Drill Bit, 120 Degree, 3/8″ - Easy installation. 3/8 hard-x 120 carbide spot drill. . The product is manufactured in france.

 

Magafor 888195H0952  Hard-X Carbide Spot Drill Bit 90 Degree 38 Diameter

Magafor 888195H0952 Hard-X Carbide Spot Drill Bit, 90 Degree, 3/8″ Diameter

Magafor 888195H0952 Hard-X Carbide Spot Drill Bit, 90 Degree, 3/8″ Diameter - Easy installation. The product is manufactured in france. 38hard-x 90 carbide spot drill.

 

Magafor 888196H0300  Hard-X Carbide Spot Drill Bit 120 Degree 3 mm

Magafor 888196H0300 Hard-X Carbide Spot Drill Bit, 120 Degree, 3 mm

Magafor 888196H0300 Hard-X Carbide Spot Drill Bit, 120 Degree, 3 mm - Easy installation. The product is manufactured in france. . 3mm hard-x carbide 120 spot drill.

 

Magafor 888195H0600  Hard-X Nc Carbide Spot Drill Bit 90 Degree 6 mm

Magafor 888195H0600 Hard-X Nc Carbide Spot Drill Bit, 90 Degree, 6 mm

Magafor 888195H0600 Hard-X Nc Carbide Spot Drill Bit, 90 Degree, 6 mm - . The product is manufactured in france. Easy installation. 6mm hard-x 90 nc carbide spot drill.

 

Magafor 888195H0635  Hard-X Carbide Spot Drill Bit 90 Degree 14 Diameter

Magafor 888195H0635 Hard-X Carbide Spot Drill Bit, 90 Degree, 1/4″ Diameter

Magafor 888195H0635 Hard-X Carbide Spot Drill Bit, 90 Degree, 1/4″ Diameter - 14hard-x 90 carbide spot drill. The product is manufactured in france. Easy installation.

 

Magafor 888196H1200  Hard-X Carbide Spot Drill Bit 120 Degree 12 mm

Magafor 888196H1200 Hard-X Carbide Spot Drill Bit, 120 Degree, 12 mm

Magafor 888196H1200 Hard-X Carbide Spot Drill Bit, 120 Degree, 12 mm - 12mm hard-x 120 carbide spot drill. The product is manufactured in france. Easy installation.

 

Magafor 888195H1000  Hard-X Carbide Spot Drill Bit 90 Degree 10 mm

Magafor 888195H1000 Hard-X Carbide Spot Drill Bit, 90 Degree, 10 mm

Magafor 888195H1000 Hard-X Carbide Spot Drill Bit, 90 Degree, 10 mm - The product is manufactured in france. 10mm hard-x 90 carbide spot drill. Easy installation.

 

Magafor 888195H0793 Hard-X Carbide NC Spot Drill Bit 516 Diameter 90 Degree

Magafor 888195H0793 Hard-X Carbide NC Spot Drill Bit, 5/16″ Diameter, 90 Degree

Magafor 888195H0793 Hard-X Carbide NC Spot Drill Bit, 5/16″ Diameter, 90 Degree - The product is manufactured in france. Easy installation. . 5/16 hard-x 90 carbide nc spot drill.

 

Magafor 888195H0800  Hard-X Carbide Spot Drill Bit 90 Degree 8 mm

Magafor 888195H0800 Hard-X Carbide Spot Drill Bit, 90 Degree, 8 mm

Magafor 888195H0800 Hard-X Carbide Spot Drill Bit, 90 Degree, 8 mm - The product is manufactured in france. 8mm hard-x 90 carbide spot drill. Easy installation.

 

uxcell Electrical 10mm Shank 4mm 016 Center Spot Drill Bit Power Tool

uxcell Electrical 10mm Shank 4mm 0.16″ Center Spot Drill Bit Power Tool

uxcell Electrical 10mm Shank 4mm 0.16″ Center Spot Drill Bit Power Tool - Used for producing center holds in components or work pieces with require machining between centers. Center and spotting drills are traditionally used to make a conical hole for a lathe center in order to make a starting point for a standard twist drill, designed to prevent the twist drill from walking. .

 

Magafor 888195H1400  Hard-X Carbide Spot Drill Bit 90 Degree 14 mm

Magafor 888195H1400 Hard-X Carbide Spot Drill Bit, 90 Degree, 14 mm

Magafor 888195H1400 Hard-X Carbide Spot Drill Bit, 90 Degree, 14 mm - The product is manufactured in france. 14mm hard-x 90 carbide spot drill. Easy installation.

 

Magafor 888196H1000  Hard-X Carbide Spot Drill Bit 120 Degree 10 mm

Magafor 888196H1000 Hard-X Carbide Spot Drill Bit, 120 Degree, 10 mm

Magafor 888196H1000 Hard-X Carbide Spot Drill Bit, 120 Degree, 10 mm - Easy installation. 10mm hard-x 120 carbide spot drill. . The product is manufactured in france.