Best 18 Diamond Coated Drill Bits

 

CNBTR 12mm Silver Bowlder Gems Diamond Coated Drill Bits Shank 23mm Pack of 20

CNBTR 1.2mm Silver Bowlder Gems Diamond Coated Drill Bits Shank 2.3mm Pack of 20

CNBTR 1.2mm Silver Bowlder Gems Diamond Coated Drill Bits Shank 2.3mm Pack of 20 - The smallest bits are truly micro and the range of sizes provide you with the exact size you need for any project requiring a tiny hole. Drill a holes in seconds use with water as a lubricant must drop water or put the stones in the water,. It suitable for use in drill hole on the jewelry, gems, jade, agate, amber, beeswax, crystal. Dimension 23 x 42mm/009 x 165″”(dia x l).

 

TOOGOOR 4 Pcs 12mm Dia Diamond Coated Drill Bit Marble Tile Glass Hole Saw Cutter Tool

TOOGOO(R) 4 Pcs 12mm Dia Diamond Coated Drill Bit Marble Tile Glass Hole Saw Cutter Tool

TOOGOO(R) 4 Pcs 12mm Dia Diamond Coated Drill Bit Marble Tile Glass Hole Saw Cutter Tool - Suitable for drilling marble, tile, ceramic, glass, porcelain, granite, stone, ideal replacement for the old or damaged ones. Only authorized seller of toogoo can sell under toogoo listings. Toogoo is a registered trademark. Toogoo(r) 4 pcs 12mm dia diamond coated drill bit marble tile glass hole saw cutter tool 4 pcs silver tone metal glass hole saw, diamond coated cutting hole, great for making clean and accurate hole on glass and tile. Works better with an electric drill (here is not included).

 

ZFE 6mm-50mm Diamond Coated Drill Bit Hole Saw Set Wet Use for Tiles Glass Fish Tanks Marble Granite Ceramic pack of 16Pcs

ZFE 6mm-50mm Diamond Coated Drill Bit Hole Saw Set, Wet Use for Tiles, Glass, Fish Tanks, Marble, Granite, Ceramic pack of 16Pcs

ZFE 6mm-50mm Diamond Coated Drill Bit Hole Saw Set, Wet Use for Tiles, Glass, Fish Tanks, Marble, Granite, Ceramic pack of 16Pcs - Can be used with a standard electric drill( excluding in this item ). This diamond coated core drill bit removes a complete circle from glass, tiles, marble, granite, cer. Do not run dry diamond coated tools will work best if you use water to keep the tools cool. Size6mm, 8mm, 10mm, 12mm, 14mm,16mm, 18mm, 20mm, 22mm, 25mm, 28mm, 30mm, 35mm, 40mm,45mm, 50mm. Easy to use, high quality,good performance, long life, excellent for making clean and accurate hole.

 

Agile-shop 110mm 4 38 Inch THK Diamond Coated Drill Bit Hole Saw Core Drills Glass Marble

Agile-shop 110mm (4 3/8″ Inch) THK Diamond Coated Drill Bit Hole Saw Core Drills Glass Marble

Agile-shop 110mm (4 3/8″ Inch) THK Diamond Coated Drill Bit Hole Saw Core Drills Glass Marble - Brand new & high quality. Easy to use, good performance and long life. Use with water as a lubricant. Suitable for use in drill hole on glass, marble, tile or granite. Drilling speed drill a holes in seconds.

 

uxcell Hardware 10mm Diamond Coated Drill Bit Ceramic Tile Glass Hole Saw

uxcell Hardware 10mm Diamond Coated Drill Bit Ceramic Tile Glass Hole Saw

uxcell Hardware 10mm Diamond Coated Drill Bit Ceramic Tile Glass Hole Saw - Weight 9gpackage content 1 x hole saw. Cutting diameter 10mm / 039″shank size 65 x 185mm / 026″ x 073″ (d l). Product name hole sawmaterial metal. Shank hole dia 4mm/ 016″side hole size 13 x 3mm/ 051″ x 012″. Total length 50mm / 2″color silver tone.

 

6mm - 40mm Diamond Coated Drill Bit Set Kit Hole Saw Holesaw Glass Granite Tile Cutter Holer Cutting Tool New

6mm – 40mm Diamond Coated Drill Bit Set Kit Hole Saw Holesaw Glass Granite Tile Cutter Holer Cutting Tool New

6mm – 40mm Diamond Coated Drill Bit Set Kit Hole Saw Holesaw Glass Granite Tile Cutter Holer Cutting Tool New - Sizes 6mm,8mm,10mm,12mm,15mm,16mm,18mm,20mm,22mm,30mm. Can be used with a standard electric drill. This diamond coated core drill bit removes a complete circle from glass, tiles, marble, granite. Materials and only needs water for lubrication.

 

2 Pcs Diamond Coated Drill Bit Ceramic Tile Glass Hole Saw 3764

2 Pcs Diamond Coated Drill Bit Ceramic Tile Glass Hole Saw 37/64″

2 Pcs Diamond Coated Drill Bit Ceramic Tile Glass Hole Saw 37/64″ - Weight 23g. Shank size 14 x 7mm/055′ x 028” (ld)total length 44mm/173”. Product name glass hole sawhole diameter 14mm/37/64”. Package content 2 x 14mm glass hole saw. Material metal, diamond particlescolor silver tone.

 

10x 316 5mm Diamond Coated Glass Marble Hole Saw Cutter Drill Bit Tile Granite

10x 3/16″ 5mm Diamond Coated Glass Marble Hole Saw Cutter Drill Bit Tile Granite

10x 3/16″ 5mm Diamond Coated Glass Marble Hole Saw Cutter Drill Bit Tile Granite - . Please add water for coolant and drill slowly. Features new 10 pieces of 5mm (close to 3/16″) diamond coated hole saw / drill bits. Suitable for use in drill hole on glass, marble, tile or granite. Drill hole diameter5mm package included 10 pieces of 5mm diamond coated hole saw / drill bits. Specifications 49mm shank and 53mm total length.

 

Agile-shop 100mm 4 Inch Diamond Coated Drill Bit Hole Saw Cutter Glass Tile Ceramic Marble

Agile-shop 100mm 4″ Inch Diamond Coated Drill Bit Hole Saw Cutter Glass Tile Ceramic Marble

Agile-shop 100mm 4″ Inch Diamond Coated Drill Bit Hole Saw Cutter Glass Tile Ceramic Marble - Brand new & high quality. Drilling speed drill a holes in seconds. Works better with a electric drill( excluding in this item ). Easy to use, good performance and long life. Use with water as a lubricant.

 

Flyshop 12 Inch 50mm Diamond Coated Drill Bit Make Lighted Bottles Glass Blocks

Flyshop 1/2 Inch 50mm Diamond Coated Drill Bit Make Lighted Bottles Glass Blocks

Flyshop 1/2 Inch 50mm Diamond Coated Drill Bit Make Lighted Bottles Glass Blocks - Lenght 2″”(50mm) includes 1 x diamond drill “. This bit can be used on glass, marble, granite, fiberglass, ceramic and porcelain tile specifications 1. The end of this drill bit is grooved, so the diamond coating has better adhesion for longer life 2. “from the manufacturer 1. The side hole allows water to lubricate inside of the drill bit to insure an absolutely smooth and perfect hole 3. Chuck size 1/2″”(12mm) 2.

 

Drilax 2-78 Diamond Coated Drill Bit Hole Circular Saw Smaller Than 3  Ceramic Porcelain Tiles Glass Marble Granite Quartz - Shower Wet Drilling Tool 2 78 Inches in Drilax010075

Drilax® 2-7/8″ Diamond Coated Drill Bit Hole Circular Saw (Smaller Than 3 “) Ceramic, Porcelain Tiles, Glass, Marble, Granite, Quartz – Shower Wet Drilling Tool 2 7/8 Inches in Drilax010075

Drilax® 2-7/8″ Diamond Coated Drill Bit Hole Circular Saw (Smaller Than 3 “) Ceramic, Porcelain Tiles, Glass, Marble, Granite, Quartz – Shower Wet Drilling Tool 2 7/8 Inches in Drilax010075 - Do not run dry diamond coated tools will work best if you use water to keep the tools cool. Shank round and size is 3/8″, use with standard electric or battery drillers. This is a very rare size save %80 over stores. Wet cutting diamond drilling holesaw tool 2 7/8″, slightly smaller than 3 inches. There is no need for a center pilot drill these tools do not have center pilot drills.

 

uxcell Glass Tile Marble Diamond Coated Drill Bit Hole Saw Tool 8mm 516 Diameter

uxcell Glass Tile Marble Diamond Coated Drill Bit Hole Saw Tool 8mm 5/16″ Diameter

uxcell Glass Tile Marble Diamond Coated Drill Bit Hole Saw Tool 8mm 5/16″ Diameter - Diamond coated tip and sturdy metal body, gives good performance and longer life. Used on glass, ceramic, porcelain, tile, limestone, slate, marble, granite, stone, and fiberglass. . Works better with an electric drill which is not included here. Designed for drilling 5/16″ diameter holes.

 

2 Pcs 10mm Dia Diamond Coated Drill Bit Marble Glass Hole Saw Cutter 52mm Long

2 Pcs 10mm Dia Diamond Coated Drill Bit Marble Glass Hole Saw Cutter 52mm Long

2 Pcs 10mm Dia Diamond Coated Drill Bit Marble Glass Hole Saw Cutter 52mm Long - Cutting hole diameter 10mm / 039″shank hole diameter 37mm / 0145″. Color silver toneweight 15g. Shank size (approx) 20 x 6mm / 08″ x 024″ (ld)total length 52mm / 2045″. Product name glass hole sawmain material metal. Package content 2 x glass hole saw.

 

DN Diamond Coated Drill Bit Hole Saw For Glass Marble 45mm 1-34 Opening Tools

DN Diamond Coated Drill Bit Hole Saw For Glass Marble 45mm 1-3/4″ Opening Tools

DN Diamond Coated Drill Bit Hole Saw For Glass Marble 45mm 1-3/4″ Opening Tools - Specifications product nameglass hole saw materialmetal color silver cutting hole outer diameter(down) 45mm/1. 77″ cutting hole outer diameter(up)8mm/0. 0″ size51x4. 472″ total length 51mm/2. 5×4. )12mm/0. 314″ shank hole diameter4mm/0. 77inch weight43g package included 1x glass hole saw. Note the color of the item may vary slightly due to photography and your own computer hole saw for glass it can cut tidy, smooth, no broken edges and no tremor phenomenon small incision resistance, improved the openning speed excellent for making clean and accurate holes on glass and tile designed with diamond coated tip and sturdy metal body, gives good performance and longer life application for suitable for glass, ceramic tile, marble, jade and other hard and brittle materials ondrilling. Only needs to be arranged in a common electric drill can be used for coolingliquid, drilling, drilling force should be light slow, especially the glass hole at the beginning of drill and drill, is currently the most ideal opening tool. 157″ shank dia (approx. 5cm/2×1. 77×1.

 

16pcsSet Diamond Coated Drill Bit Hole Saw Set 6-50mm Wet Use for Tiles Glass Fish Tanks Marble Granite Ceramic

16pcs/Set Diamond Coated Drill Bit Hole Saw Set 6-50mm, Wet Use for Tiles, Glass, Fish Tanks, Marble, Granite, Ceramic

16pcs/Set Diamond Coated Drill Bit Hole Saw Set 6-50mm, Wet Use for Tiles, Glass, Fish Tanks, Marble, Granite, Ceramic - This diamond coated core drill bit removes a complete circle from glass, tiles, marble, granite, cer. Can be used with a standard electric drill( excluding in this item ). Size6mm, 8mm, 10mm, 12mm, 14mm,16mm, 18mm, 20mm, 22mm, 25mm, 28mm, 30mm, 35mm, 40mm,45mm, 50mm. Easy to use, high quality,good performance, long life, excellent for making clean and accurate hol. Do not run dry diamond coated tools will work best if you use water to keep the tools cool.

 

GooDeal 15pcs Diamond Coated Core Hole Saw Drill Bit Tool 6-50mm Drill Bit for Ceramic Glass Porcelain Marble

GooDeal 15pcs Diamond Coated Core Hole Saw Drill Bit Tool 6-50mm Drill Bit for Ceramic Glass Porcelain Marble

GooDeal 15pcs Diamond Coated Core Hole Saw Drill Bit Tool 6-50mm Drill Bit for Ceramic Glass Porcelain Marble - Works better with a electric drill (excluding in the item). Fast shipping from california, us . Shipping from our usa warehouse, fast shipping and good service. Good performance and long life. Excellent for making clean and accurate hole on glass and tile.

 

Flyshop 34 Inch Diamond Coated Drill Bit Make Lighted Bottles Glass Blocks

Flyshop 3/4 Inch Diamond Coated Drill Bit Make Lighted Bottles Glass Blocks

Flyshop 3/4 Inch Diamond Coated Drill Bit Make Lighted Bottles Glass Blocks - This bit can be used on glass, marble, granite, fiberglass, ceramic and porcelain tile specifications 1. Lenght 2″(50mm) includes 1 x diamond drill. Chuck size 3/4″ 2. The end of this drill bit is grooved, so the diamond coating has better adhesion for longer life 2. From the manufacturer 1. The side hole allows water to lubricate inside of the drill bit to insure an absolutely smooth and perfect hole 3.

 

Glass Tile 16mm Diamond Coated Drill Bit Tool Hole Saw Cutter 10pcs

Glass Tile 16mm Diamond Coated Drill Bit Tool Hole Saw Cutter 10pcs

Glass Tile 16mm Diamond Coated Drill Bit Tool Hole Saw Cutter 10pcs - . Features 16mm 5/8 inch cutting diameter, 7mm round shank diamond coated drill bit hole saw in silver tone color. The hole saw tool is ideal for for making clean and accurate hole on glass , tile or ceramic. Works better with a electric drll(here is not included). The diamond coating on these saws give superior performance and life.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.