Best 20 10 24 Threads

 

316 Stainless Steel Machine Screw Plain Finish Flat Head Phillips Drive 1-14 Length 10-24 Threads Pack of 25

316 Stainless Steel Machine Screw, Plain Finish, Flat Head, Phillips Drive, 1-1/4″ Length, #10-24 Threads (Pack of 25)

316 Stainless Steel Machine Screw, Plain Finish, Flat Head, Phillips Drive, 1-1/4″ Length, #10-24 Threads (Pack of 25) - 316 stainless steel provides strength and better corrosion resistance than 18-8 stainless steel. Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening. Plain surface has no finish or coating. Flat head is cone shaped for use in countersunk holes and has a flat top that fits flush with the mated surface.

 

JW Winco L03-5316 CN Check Nut Steel 10-24 Thread

J.W. Winco L03-5316 CN Check Nut, Steel, 10-24 Thread

J.W. Winco L03-5316 CN Check Nut, Steel, 10-24 Thread - May be used in combination with other components such as knurled head screws, torque thumb screws hand knob assemblies, toggle shoe clamp assemblies and many other tooling applications. Rohs compliant. Soft, low carbon steel, black oxide finish. May be used in combination with other components such as hand knob assemblies, toggle shoe clamp assemblies and many other tooling applications.

 

LASCO SB-515 Faucet Handle Screw with 1 12-Inch x 10-24 Thread and Chrome Plated Oval Head 2-Pack

LASCO SB-515 Faucet Handle Screw with 1 1/2-Inch x 10-24 Thread and Chrome Plated Oval Head, 2-Pack

LASCO SB-515 Faucet Handle Screw with 1 1/2-Inch x 10-24 Thread and Chrome Plated Oval Head, 2-Pack - Industry number s-515. 1 1/2-inch x 10-24 thread. Commonly used size. Faucet replacement part. Lasco sb-515 faucet handle screw, 1 1/2-inch x 10-24 thread, chrome plated oval head, 2-pack. . Chrome plated oval head faucet handle screw.

 

Bridle Rng 2 w10-24 Thread 100 per pack

Bridle Rng 2″ w/10-24 Thread, 100 per pack

Bridle Rng 2″ w/10-24 Thread, 100 per pack - 2 inch loop size machine screw thread bridle ring with 10-24 threaded leg. Binding head is a slightly undercut, low-profile head with a round top and short vertical sides. Combination phillips slotted drive accepts both phillips and standard slotted drivers and is designed to prevent over-tightening.

 

Steel Pan Head Machine Screw Black Oxide Finish Meets ASME B1863 2 Phillips Drive 10-24 Thread Size 4-12 Length Fully Threaded Import Pack of 10

Steel Pan Head Machine Screw, Black Oxide Finish, Meets ASME B18.6.3, #2 Phillips Drive, #10-24 Thread Size, 4-1/2″ Length, Fully Threaded, Import (Pack of 10)

Steel Pan Head Machine Screw, Black Oxide Finish, Meets ASME B18.6.3, #2 Phillips Drive, #10-24 Thread Size, 4-1/2″ Length, Fully Threaded, Import (Pack of 10) - 18-8 stainless steel provides good corrosion resistance and strength. Thread cutting screw with type f point has machine screw threads that taper down to a blunt edge and is suitable for heavy gauge sheet metal, aluminum, cast iron, brass, and plastic. Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening. Flat undercut head has a flat top with an 82-degree cone-shaped bearing surface and is undercut for use in shallow countersunk holes. Plain surface has no finish or coating.

 

Nylon 66 Pan Head Machine Screw Black Slotted Drive 10-24 Thread Size 12 Length Fully Threaded USA Made Pack of 100

Nylon 6/6 Pan Head Machine Screw, Black, Slotted Drive, #10-24 Thread Size, 1/2″ Length, Fully Threaded, USA Made (Pack of 100)

Nylon 6/6 Pan Head Machine Screw, Black, Slotted Drive, #10-24 Thread Size, 1/2″ Length, Fully Threaded, USA Made (Pack of 100) - Plain surface has no finish or coating. Flat undercut head has a flat top with an 82-degree cone-shaped bearing surface and is undercut for use in shallow countersunk holes. Thread cutting screw with type f point has machine screw threads that taper down to a blunt edge and is suitable for heavy gauge sheet metal, aluminum, cast iron, brass, and plastic. Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening. 18-8 stainless steel provides good corrosion resistance and strength.

 

RUBBER-NUT THREADED INSERTS 10-24 THREAD SIZE 015-050 GRIP RANGE PACK OF 10

RUBBER-NUT THREADED INSERTS, 10-24 THREAD SIZE, .015-.050 GRIP RANGE (PACK OF 10)

RUBBER-NUT THREADED INSERTS, 10-24 THREAD SIZE, .015-.050 GRIP RANGE (PACK OF 10) - Dampens vibration & shock / muffles noise. 10-24 thread size. No installation tools required / easy one-step installation. Helps prevent galvanic corrosion / seals out ambient moisture. Blind, install from one side.

 

Steel Pan Head Machine Screw Black Zinc Plated Meets ASME B1863 2 Phillips Drive 10-24 Thread Size 3 Length Fully Threaded Import Pack of 50

Steel Pan Head Machine Screw, Black Zinc Plated, Meets ASME B18.6.3, #2 Phillips Drive, #10-24 Thread Size, 3″ Length, Fully Threaded, Import (Pack of 50)

Steel Pan Head Machine Screw, Black Zinc Plated, Meets ASME B18.6.3, #2 Phillips Drive, #10-24 Thread Size, 3″ Length, Fully Threaded, Import (Pack of 50) - . They are available with a variety of head shapes, which determine how the screw interacts with the mating surface, and drive styles, which determine the type of driver required to install and remove the screw. Machine screws are threaded fasteners that are typically used with nuts or drilled and tapped (threaded) holes.

 

LASCO SB-506 Faucet Handle Screw with 12-Inch x 10-24 Thread and Chrome Plated Oval Head 2-Pack

LASCO SB-506 Faucet Handle Screw with 1/2-Inch x 10-24 Thread and Chrome Plated Oval Head, 2-Pack

LASCO SB-506 Faucet Handle Screw with 1/2-Inch x 10-24 Thread and Chrome Plated Oval Head, 2-Pack - Industry number s-506. Faucet replacement part. Commonly used size. Chrome plated oval head faucet handle screw. 1/2-inch x 10-24 thread. Lasco sb-506 faucet handle screw, 1/2-inch x 10-24 thread, chrome plated oval head, 2-pack.

 

18-8 Stainless Steel Thread Cutting Screw Plain Finish 82 Degree Flat Undercut Head Phillips Drive Type 23 10-24 Thread Size 34 Length Pack of 25

18-8 Stainless Steel Thread Cutting Screw, Plain Finish, 82 Degree Flat Undercut Head, Phillips Drive, Type 23, #10-24 Thread Size, 3/4″ Length (Pack of 25)

18-8 Stainless Steel Thread Cutting Screw, Plain Finish, 82 Degree Flat Undercut Head, Phillips Drive, Type 23, #10-24 Thread Size, 3/4″ Length (Pack of 25) - Flat undercut head has a flat top with an 82-degree cone-shaped bearing surface and is undercut for use in shallow countersunk holes. 18-8 stainless steel provides good corrosion resistance and strength. Thread cutting screw with type 23 point style has fine threads that taper down to a blunt point with a large cutting surface suitable for soft metal, provides excellent chip clearance, and requires minimal rotating force to install. Plain surface has no finish or coating. Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening.

 

Steel Truss Head Machine Screw Black Oxide Finish Meets ASME B1863 2 Phillips Drive 10-24 Thread Size 1 Length Fully Threaded Imported Pack of 100

Steel Truss Head Machine Screw, Black Oxide Finish, Meets ASME B18.6.3, #2 Phillips Drive, #10-24 Thread Size, 1″ Length, Fully Threaded, Imported (Pack of 100)

Steel Truss Head Machine Screw, Black Oxide Finish, Meets ASME B18.6.3, #2 Phillips Drive, #10-24 Thread Size, 1″ Length, Fully Threaded, Imported (Pack of 100) - Plain surface has no finish or coating. Wafer head has a flat top, a 70-degree cone-shaped bearing surface, and a small slope between the top and the bearing surface. Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening. 410 stainless steel has high strength and hardness ratings and resists corrosion in mild environments.

 

Brass Small Pattern Machine Screw Hex Nut Plain Finish 10-24 Thread Size 516 Width Across Flats 764 Thick Pack of 100

Brass Small Pattern Machine Screw Hex Nut, Plain Finish, #10-24 Thread Size, 5/16″ Width Across Flats, 7/64″ Thick (Pack of 100)

Brass Small Pattern Machine Screw Hex Nut, Plain Finish, #10-24 Thread Size, 5/16″ Width Across Flats, 7/64″ Thick (Pack of 100) - The nut has a small pattern design, meaning it is narrower than a standard machine screw hex nut for use in areas with limited space. It has six flat sides that a wrench can grip to turn from the side, enabling use when there is no space above the nut. Nuts are internally threaded fasteners that are used with bolts and threaded rods and studs to connect components. . The material is nonmagnetic. Several different nut styles fit a variety of application and installation requirements. Some nuts have a self-locking mechanism, such as a nylon patch or distorted threads, that makes them suitable for applications with a high amount of vibration. The brass small pattern machine screw hex nut has a plain finish. Others, such as eye nuts, thumb nuts, and wing nuts, can be tightened by hand. Some styles, such as hex nuts, acorn nuts, flange nuts, and coupling nuts, must be tightened with a tool. Brass provides corrosion resistance and offers thermal and electrical conductivity.

 

Unbrako 1100579 Alloy Steel Socket Cap Screw Black Oxide Finish Low-Head Socket Cap Head Hex Socket Drive Right Hand Threads 10-24 Thread Size 12 Length Fully Threaded Pack of 100

Unbrako 1100579 Alloy Steel Socket Cap Screw, Black Oxide Finish, Low-Head Socket Cap Head, Hex Socket Drive, Right Hand Threads, #10-24 Thread Size, 1/2″ Length, Fully Threaded (Pack of 100)

Unbrako 1100579 Alloy Steel Socket Cap Screw, Black Oxide Finish, Low-Head Socket Cap Head, Hex Socket Drive, Right Hand Threads, #10-24 Thread Size, 1/2″ Length, Fully Threaded (Pack of 100) - Low-head socket cap is round with a flat top and half the height of a standard socket cap head for use in thin materials and low-clearance applications. Black oxide finish offers mild corrosion resistance and lubricity. Hex socket drive has a hexagonal slot that turns using an allen key driver, permitting more compact spacing than a hex head cap screw. Alloy steel is often used in applications where strength is the primary consideration.

 

Nylon 66 Pan Head Machine Screw Black 2 Phillips Drive 10-24 Thread Size 1-12 Length Fully Threaded USA Made Pack of 100

Nylon 6/6 Pan Head Machine Screw, Black, #2 Phillips Drive, #10-24 Thread Size, 1-1/2″ Length, Fully Threaded, USA Made (Pack of 100)

Nylon 6/6 Pan Head Machine Screw, Black, #2 Phillips Drive, #10-24 Thread Size, 1-1/2″ Length, Fully Threaded, USA Made (Pack of 100) - Flat undercut head has a flat top with an 82-degree cone-shaped bearing surface and is undercut for use in shallow countersunk holes. 18-8 stainless steel provides good corrosion resistance and strength. Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening. Thread cutting screw with type f point has machine screw threads that taper down to a blunt edge and is suitable for heavy gauge sheet metal, aluminum, cast iron, brass, and plastic. Plain surface has no finish or coating.

 

18-8 Stainless Steel Pan Head Machine Screw Black Oxide Finish Meets MS-51957 2 Phillips Drive 10-24 Thread Size 38 Length Fully Threaded USA Made Pack of 25

18-8 Stainless Steel Pan Head Machine Screw, Black Oxide Finish, Meets MS-51957, #2 Phillips Drive, #10-24 Thread Size, 3/8″ Length, Fully Threaded, USA Made (Pack of 25)

18-8 Stainless Steel Pan Head Machine Screw, Black Oxide Finish, Meets MS-51957, #2 Phillips Drive, #10-24 Thread Size, 3/8″ Length, Fully Threaded, USA Made (Pack of 25) - Steel is often used in applications where strength is the primary consideration. Zinc plating resists corrosion and has a reflective appearance. Wafer head has a flat top, a 70-degree cone-shaped bearing surface, and a small slope between the top and the bearing surface. Star drive has a six-pointed indentation that provides a large contact area for the driver, resisting slippage better than a phillips or slotted drive.

 

Steel Pan Head Machine Screw Zinc Plated Meets ASME B1863 2 Phillips Drive 10-24 Thread Size 5-12 Length Fully Threaded Imported Pack of 10

Steel Pan Head Machine Screw, Zinc Plated, Meets ASME B18.6.3, #2 Phillips Drive, #10-24 Thread Size, 5-1/2″ Length, Fully Threaded, Imported (Pack of 10)

Steel Pan Head Machine Screw, Zinc Plated, Meets ASME B18.6.3, #2 Phillips Drive, #10-24 Thread Size, 5-1/2″ Length, Fully Threaded, Imported (Pack of 10) - Flat head has an 82-degree cone-shaped bearing surface for use in countersunk holes and a flat top that fits flush with the mated surface. Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening. Thread cutting screw with type f point has machine screw threads that taper down to a blunt edge and is suitable for heavy gauge sheet metal, aluminum, cast iron, brass, and plastic. Black oxide finish offers mild corrosion resistance and lubricity. Steel is often used in applications where strength is the primary consideration.

 

Morton Stainless Steel Knurled Head Nuts Inch Size 10-24 Thread Size 716 Length 12 Diameter

Morton Stainless Steel Knurled Head Nuts, Inch Size, 10-24 Thread Size, 7/16″ Length, 1/2″ Diameter

Morton Stainless Steel Knurled Head Nuts, Inch Size, 10-24 Thread Size, 7/16″ Length, 1/2″ Diameter - Made from 300 series stainless steel. Diamond knurl. Full interior thread.

 

Brass Acorn Nut Grade 5 Right Hand Threads 10-24 Threads Pack of 25

Brass Acorn Nut, Grade 5, Right Hand Threads, #10-24 Threads (Pack of 25)

Brass Acorn Nut, Grade 5, Right Hand Threads, #10-24 Threads (Pack of 25) - Several different nut styles fit a variety of application and installation requirements. Some styles, such as hex nuts, acorn nuts, flange nuts, and coupling nuts, must be tightened with a tool. Brass provides corrosion resistance and offers thermal and electrical conductivity. . Others, such as eye nuts, thumb nuts, and wing nuts, can be tightened by hand. Nut styles such as locknuts and self-locking hex nuts have a locking mechanism that makes them suitable for applications with a high amount of vibration. The material is nonmagnetic. The brass acorn nut, also called a cap nut, has a domed top that covers exposed threads on rods, studs, and bolts. Nuts are internally threaded fasteners that are used with bolts and threaded rods and studs to connect components.

 

Steel Pan Head Machine Screw Black Zinc Plated Meets ASME B1863 2 Phillips Drive 10-24 Thread Size 12 Length Fully Threaded Import Pack of 100

Steel Pan Head Machine Screw, Black Zinc Plated, Meets ASME B18.6.3, #2 Phillips Drive, #10-24 Thread Size, 1/2″ Length, Fully Threaded, Import (Pack of 100)

Steel Pan Head Machine Screw, Black Zinc Plated, Meets ASME B18.6.3, #2 Phillips Drive, #10-24 Thread Size, 1/2″ Length, Fully Threaded, Import (Pack of 100) - They are available with a variety of head shapes, which determine how the screw interacts with the mating surface, and drive styles, which determine the type of driver required to install and remove the screw. Machine screws are threaded fasteners that are typically used with nuts or drilled and tapped (threaded) holes.

 

Steel Pan Head Machine Screw Black Oxide Finish Meets ASME B1863 2 Phillips Drive 10-24 Thread Size 1-14 Length Fully Threaded Import Pack of 100

Steel Pan Head Machine Screw, Black Oxide Finish, Meets ASME B18.6.3, #2 Phillips Drive, #10-24 Thread Size, 1-1/4″ Length, Fully Threaded, Import (Pack of 100)

Steel Pan Head Machine Screw, Black Oxide Finish, Meets ASME B18.6.3, #2 Phillips Drive, #10-24 Thread Size, 1-1/4″ Length, Fully Threaded, Import (Pack of 100) - They are available with a variety of head shapes, which determine how the screw interacts with the mating surface, and drive styles, which determine the type of driver required to install and remove the screw. Machine screws are threaded fasteners that are typically used with nuts or drilled and tapped (threaded) holes.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.