Best 24 Torque Drivers

 

ES-618LH1 Lever Start Torque Screwdriver Slip Clutch

ES-618LH1 Lever Start Torque Screwdriver (Slip Clutch)

ES-618LH1 Lever Start Torque Screwdriver (Slip Clutch) - The slip/cushion clutch slips once the pre-set torque is reached. Common usages for this screwdriver are tapping screws and applications with less stringent torque control requirements. The es-618lh1 is a lever start screwdriver with a slip/cushion type clutch. The torque setting is set by adjusting the stepless torque adjuster at the top of the screwdriver. This feels like a slight release of pressure on the bit of the screwdriver to the operator.

 

Lindstrom MAL500-3 5-40 lbin Micro-Adjustable Torque Driver

Lindstrom MAL500-3 5-40 lb.in. Micro-Adjustable Torque Driver

Lindstrom MAL500-3 5-40 lb.in. Micro-Adjustable Torque Driver -  Length 673″ accuracy +/-6 control type micro-adjustable drive size 1/4 (hex)” torque 5-40 in/lb type cam-over . Comes with an inch/lb scale which gives readable results cnm scale no longer available .

 

Husky 14 in Hex Torque Driver

Husky 1/4 in. Hex Torque Driver

Husky 1/4 in. Hex Torque Driver - Perfect for technicians working on aluminum to copper connectors requiring limited torque. It’s positive bit locking to eliminate slippage or dropping in tight spaces. Hex torque drive has been calibrated for +/- 4% accuracy. . The 1/4 in.

 

Pedros Fixed Torque Driver 5 Nm

Pedro’s Fixed Torque Driver: 5 Nm

Pedro’s Fixed Torque Driver: 5 Nm - Each wrench is calibrated using a torque calibration analyzer accurate to +/- 1%, then tested 5x results included. Pedro’s fixed torque drivers are shop quality preset torque wrenches designed with a torque-limiting clutch to eliminate over-torquing of critical parts  when the torque value is. Magnetic socket drive accepts standard 1″ hex bits 4mm, 5mm, & t25 bits included. Ergonomic handle stores two extra bits.

 

Tohnichi Dial Torque Screwdriver 40FTD2-A-S 5~40lbfin

Tohnichi Dial Torque Screwdriver 40FTD2-A-S (5~40lbf.in)

Tohnichi Dial Torque Screwdriver 40FTD2-A-S (5~40lbf.in) - Cw and ccw loading directions main and memory pointers. Resin grip with bright easy to read scale. Includes certificate of calibration accepts 1/4 hex bits (not included). Torque range 5~40lbfin. Accuracy +/-3% of reading.

 

Bondhus 50154 25mm Hex Tip ClickSet Torque Limiting Device Screwdriver Blade with TuffKote Finish

Bondhus 50154 2.5mm Hex Tip ClickSet Torque Limiting Device Screwdriver Blade with TuffKote Finish

Bondhus 50154 2.5mm Hex Tip ClickSet Torque Limiting Device Screwdriver Blade with TuffKote Finish - Bondhus clickset tld (torque limiting device) with tuffkote finish has a wide range of factory preset torque limiting handles, no adjustment is needed. When the preset torque level is reached, the mechanism slips and makes an audible “click” which protects from overtorquing. Reduces fastener wear and stripping and potential damage to carbide inserts. .

 

Torque Driver EA-BN412LCE Brushless Motor ESD Safe Lever Start 132 - 1056 in lbs Auto Stop Clutch with SP-B32HL62T1C6 Power Supply

Torque Driver EA-BN412L/CE Brushless Motor ESD Safe Lever Start 1.32 – 10.56 in lbs (Auto Stop Clutch) with SP-B32HL62T1/C6 Power Supply

Torque Driver EA-BN412L/CE Brushless Motor ESD Safe Lever Start 1.32 – 10.56 in lbs (Auto Stop Clutch) with SP-B32HL62T1/C6 Power Supply - Common usages for this screwdriver are demanding assembly fastening applications that require one or all the following torque control, esd protection, or screw counting functionality. A selection of power supply controllers are available that provide hi/lo speed, slow start, output signals, and fastener counter and run down verification functionality. This screwdriver has a brushless motot that generates less heat, requires less maintenance, and is ideal for clean-rooms. Torque driver ea-bn412l/ce is a lever-start torque limiting screwdriver with an esd (electrostatic discharge) housing designed to ensure the operator’s comfort. This screwdriver’s full auto shut-off clutch completely stops the bit from turning once the torque setting is reached. This feature ensures that the fastener is not damaged by the screwdriver’s bit.

 

Lindstrom MAL500-1 20-100 ozin Micro-Adjustable Torque Driver

Lindstrom MAL500-1 20-100 oz.in. Micro-Adjustable Torque Driver

Lindstrom MAL500-1 20-100 oz.in. Micro-Adjustable Torque Driver - Lock ring holds selected torque value in place and a click alerts user that torque set has been achieved. Length 543″ accuracy +/-6 control type micro-adjustable drive size 1/4 (hex)” torque 20-100 in/oz type cam-over . Includes certificate of calibration (nist traceable cert offered for additional fee). Rotary slip mechanism prevents over torque by ratcheting after click accuracy +/-3% of indicated value. Adjustable torque setting by twisting shaft with main and supplementary scales for clockwise tightening only.

 

Pedros Fixed Torque Driver 6 Nm

Pedro’s Fixed Torque Driver: 6 Nm

Pedro’s Fixed Torque Driver: 6 Nm - Pedro’s fixed torque drivers are shop quality preset torque wrenches designed with a torque-limiting clutch to eliminate over-torquing of critical parts  when the torque value is. Ergonomic handle stores two extra bits. Each wrench is calibrated using a torque calibration analyzer accurate to +/- 1%, then tested 5x results included. Magnetic socket drive accepts standard 1″ hex bits 4mm, 5mm, & t25 bits included.

 

Laser - 5490 Torque Driver 1-5Nm 14D by Laser

Laser – 5490 Torque Driver 1-5Nm 1/4D by Laser

Laser – 5490 Torque Driver 1-5Nm 1/4D by Laser - Supplied with a sliding t-bar for ease of applicationcalibration certificate suppliedsupplied in a blow mould case1/4d.

 

Neiko 10573B Torque Screwdriver Set 14-Inch Drive Long Shank 10 to 50 Inch-Pound Range 20 Bits Included

Neiko 10573B Torque Screwdriver Set, 1/4-Inch Drive, Long Shank, 10 to 50 Inch-Pound Range, 20 Bits Included

Neiko 10573B Torque Screwdriver Set, 1/4-Inch Drive, Long Shank, 10 to 50 Inch-Pound Range, 20 Bits Included - Bits and case includes storage case and 20 bits phillips (2 x #0, #1, #2, #3), slotted (2 x 4, 6mm), torx (t10, t15, t20, t25, t30, t40) and hex (3, 4, 5, 6mm). Torque limiting feature screwdriver torques only to set level, avoiding damage to threaded fasteners. Simple operation ‘pull-turn-lock’ handle design ensures easy adjustment and automatic tension locking. Versatile 1/4-inch drive head drive head is compatible with any 1/4-inch socket, allowing varied uses such as electronic repair, firearm accurizing, and instrument assembly. Professional grade tool meter window displays a 10-50 inch-pound torque range, adjustable in 5 inch-pound increments.

 

ES-625L1 Lever Start Torque Screwdriver Slip Clutch

ES-625L1 Lever Start Torque Screwdriver (Slip Clutch)

ES-625L1 Lever Start Torque Screwdriver (Slip Clutch) - Common usages for this screwdriver are tapping screws and applications with less stringent torque control requirements. The torque setting is set by adjusting the stepless torque adjuster at the top of the screwdriver. This feels like a slight release of pressure on the bit of the screwdriver to the operator. The es-625l1 is a lever start screwdriver with a slip/cushion type clutch. The slip/cushion clutch slips once the pre-set torque is reached.

 

Utica TS100 TS100 ToRQUE DRIVER WCERT oF CAL CooPER by Utica

Utica TS100 TS100 ToRQUE DRIVER W/CERT oF CAL CooPER by Utica

Utica TS100 TS100 ToRQUE DRIVER W/CERT oF CAL CooPER by Utica - High rpm 1000 low rpm 600. Lever start, esd housing, provided with dc controller. Forward/reverse switch with automatic shut-off precision clutch. Utica ts100 ts100 torque driver w/cert of cal cooper. Power souce 32 vdc.

 

ED-645L1 Lever-Start Torque Screwdriver Auto Stop Clutch

ED-645L1 Lever-Start Torque Screwdriver (Auto Stop Clutch)

ED-645L1 Lever-Start Torque Screwdriver (Auto Stop Clutch) - Common usages for these scewdrivers are assembly fastening applications that require precision torque control. This screwdriver has a full auto shut-off clutch that completely stops the bit of the screwdriver once the torque setting is reached. The ed-645l1 is a lever start torque scewdriver with an ergonomic design to ensure operator’s comfort. This feature ensures that the fastener is not damaged by the screwdriver’s bit.

 

Tohnichi Dial Torque Screwdriver FTD15Z2-S 2~15 ozfin

Tohnichi Dial Torque Screwdriver FTD15Z2-S (2~15 ozf.in)

Tohnichi Dial Torque Screwdriver FTD15Z2-S (2~15 ozf.in) - Torque range 2~15 ozfin. Cw and ccw loading directions main and memory pointers. Accuracy +/-3% of reading. Includes certificate of calibration accepts 1/4 hex bits (not included). Resin grip with bright easy to read scale.

 

Wiha VDE Slim Vario Torque Driver Wallet Set 11 Pieces by Wiha

Wiha VDE Slim Vario Torque Driver Wallet Set (11 Pieces) by Wiha

Wiha VDE Slim Vario Torque Driver Wallet Set (11 Pieces) by Wiha - This micro torx screwdriver tip is used to open many tiny electronic devices. Screwdriver bit has a fine well formed point, cr-v hardened for maximum durability. Requires a mini 1/8″ (4mm) hex drive screwdriver handle, not included. Used on ipad, psp, fitbit, and some blackberry phones. Wiha vde slim vario torque driver wallet set (11 pieces).

 

Wiha Torque Screwdriver Set Vario-S Hex 51 Pc

Wiha Torque Screwdriver Set Vario-S Hex 51 Pc.

Wiha Torque Screwdriver Set Vario-S Hex 51 Pc. - Made in us. Perfect for use with aluminum and plastic screws. Price for 1 each kit contents 53 pieces of torque control 1/4″ bit set, 28506 torque driver 10-50 in-lbs (+/-6%) and 48, 1/4 drive insert bits in steel storage box rohs compliant na. Reduces potential damage to carbide inserts. Reduces fastener wear and stripping.

 

Tohnichi Dial Torque Screwdriver FTD400CN2-S 50~400cNm

Tohnichi Dial Torque Screwdriver FTD400CN2-S (50~400cNm)

Tohnichi Dial Torque Screwdriver FTD400CN2-S (50~400cNm) - Torque range 50~400cnm graduations 10cnm. Resin grip with bright easy to read scale. Includes certificate of calibration accepts 1/4 hex bits (not included). Accuracy +/-3% of reading. Cw and ccw loading directions main and memory pointers.

 

Tohnichi Dial Torque Screwdriver 10FTD2-A-S 1~10lbfin

Tohnichi Dial Torque Screwdriver 10FTD2-A-S (1~10lbf.in.)

Tohnichi Dial Torque Screwdriver 10FTD2-A-S (1~10lbf.in.) - Accuracy +/-3% of reading. Includes certificate of calibration accepts 1/4 hex bits (not included). Torque range 1~10lbfin. Cw and ccw loading directions main and memory pointers. Resin grip with bright easy to read scale.

 

Lindstrom PS501-3 - Lindstrom PS501-3 Internally Adjustable Torque Driver 15-15 in lbs

Lindstrom PS501-3 – Lindstrom PS501-3 Internally Adjustable Torque Driver, 1.5-15 in lbs

Lindstrom PS501-3 – Lindstrom PS501-3 Internally Adjustable Torque Driver, 1.5-15 in lbs - Repeatable accuracy 3%. 200-1000cnm (~15-74lb ft) range. Axial torque driver. T-handle accessory included. Drive 1/4″ hex bits.

 

Sturtevant Torque Screwdriver 2-36 LbfIn Adjustable

Sturtevant Torque Screwdriver, 2-36 Lbf/In, Adjustable

Sturtevant Torque Screwdriver, 2-36 Lbf/In, Adjustable - Cal 36/4 screwdriver. Inch torque driver only, 2-36 in. Lbs.

 

ED-630LH1 Lever-Start Torque Screwdriver Auto Stop Clutch

ED-630LH1 Lever-Start Torque Screwdriver (Auto Stop Clutch)

ED-630LH1 Lever-Start Torque Screwdriver (Auto Stop Clutch) - This screwdriver has a full auto shut-off clutch that completely stops the bit of the screwdriver once the torque setting is reached. The ed-630lh1 is a lever start torque scewdriver with an ergonomic design to ensure operator’s comfort. This feature ensures that the fastener is not damaged by the screwdriver’s bit. Common usages for these scewdrivers are assembly fastening applications that require precision torque control. .

 

Pedros Fixed Torque Driver 4 Nm

Pedro’s Fixed Torque Driver: 4 Nm

Pedro’s Fixed Torque Driver: 4 Nm - Pedro’s fixed torque drivers are shop quality preset torque wrenches designed with a torque-limiting clutch to eliminate over-torquing of critical parts  when the torque value is. Ergonomic handle stores two extra bits. Magnetic socket drive accepts standard 1″ hex bits 4mm, 5mm, & t25 bits included. Each wrench is calibrated using a torque calibration analyzer accurate to +/- 1%, then tested 5x results included.

 

Tohnichi Adjustable Torque Screwdriver LTD120CN 20~120 cNm

Tohnichi Adjustable Torque Screwdriver LTD120CN 20~120 cNm

Tohnichi Adjustable Torque Screwdriver LTD120CN 20~120 cNm - Adjustable torque screwdriver with lock ring. Accuracy +/-3% of reading. At set torque a stop is felt and upon release springs back. Torque range 20~120 cnm. Includes removable resin grip and certificate of calibration.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.