Best and Coolest 21 Drill Mills in 2019

 

Drill America MMO516-2FSE-BN Solid Carbide End Mill Polished Finish 2 Flute Ball End 1316 Cutting Length 516 Cutting Diameter 2-12 Length 516 Shank Pack of 1 #ad

Drill America MMO5/16-2FSE-BN Solid Carbide End Mill, Polished Finish, 2 Flute, Ball End, 13/16″ Cutting Length, 5/16″ Cutting Diameter, 2-1/2″ Length, 5/16″ Shank (Pack of 1)

Drill America MMO5/16-2FSE-BN Solid Carbide End Mill, Polished Finish, 2 Flute, Ball End, 13/16″ Cutting Length, 5/16″ Cutting Diameter, 2-1/2″ Length, 5/16″ Shank (Pack of 1) #ad - Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. 2 flute single end ball. Round shanks allow use with a wide variety of toolholding systems. Available in polished finish. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging.

 

Drill America MMO1364-4FSE Solid Carbide End Mill Polished Finish 4 Flute Square End 58 Cutting Length 1364 Cutting Diameter 2-12 Length 14 Shank Pack of 1 #ad

Drill America MMO13/64-4FSE Solid Carbide End Mill, Polished Finish, 4 Flute, Square End, 5/8″ Cutting Length, 13/64″ Cutting Diameter, 2-1/2″ Length, 1/4″ Shank (Pack of 1)

Drill America MMO13/64-4FSE Solid Carbide End Mill, Polished Finish, 4 Flute, Square End, 5/8″ Cutting Length, 13/64″ Cutting Diameter, 2-1/2″ Length, 1/4″ Shank (Pack of 1) #ad - Round shanks allow use with a wide variety of toolholding systems. 4 flute single end. Available in polished finish. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems.

 

Melin Tool A-DP Cobalt Steel Drill Mill Uncoated Bright Finish 30 Deg Point Angle 2 Flutes 425 Overall Length 1 Cutting Diameter 075 Shank Diameter #ad

Melin Tool A-DP Cobalt Steel Drill Mill, Uncoated (Bright) Finish, 30 Deg Point Angle, 2 Flutes, 4.25″ Overall Length, 1″ Cutting Diameter, 0.75″ Shank Diameter

Melin Tool A-DP Cobalt Steel Drill Mill, Uncoated (Bright) Finish, 30 Deg Point Angle, 2 Flutes, 4.25″ Overall Length, 1″ Cutting Diameter, 0.75″ Shank Diameter #ad - Round shanks allow use with a wide variety of toolholding systems. Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys. Can be used for drilling, slotting, chamfering, and profile milling. Used for general purpose milling in most materials of medium and tough alloy materials such as stainless steel, nickel base alloy, brass, iron etc. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications.

 

SHOP FOX M1111 6-Inch by 21-Inch Mill and Drill #ad

SHOP FOX M1111 6-Inch by 21-Inch Mill and Drill

SHOP FOX M1111 6-Inch by 21-Inch Mill and Drill #ad - Just put the machine in tapping mode, start the tap, and when the thread is completed, push the button at the end of the rack levers and the spindle reverses, immediately withdrawing the tap from the hole. All of these extra features make the m1111 milling machine one of the most sought after machines available made in an iso 9001 factory. The quick reversing tapping feature also makes hole threading simple. However, this mill is further fortified with a quick-tilt headstock for horizontal milling, 1 hp brushless motor, a multi-function digital depth scale on the quill, push-button speed control and digital spindle tachometer. The back-lit digital tachometer tells you the precise spindle speed for matching tooling and material. This m1111 milling machine has all of the important features of the m1110, but with a few extra time-saving luxuries.

 

Melin Tool AMG-DP Carbide Drill Mill AlTiN Monolayer Finish 30 Deg Point Angle 2 Flutes 2 Overall Length 01875 Cutting Diameter 01875 Shank Diameter #ad

Melin Tool AMG-DP Carbide Drill Mill, AlTiN Monolayer Finish, 30 Deg Point Angle, 2 Flutes, 2″ Overall Length, 0.1875″ Cutting Diameter, 0.1875″ Shank Diameter

Melin Tool AMG-DP Carbide Drill Mill, AlTiN Monolayer Finish, 30 Deg Point Angle, 2 Flutes, 2″ Overall Length, 0.1875″ Cutting Diameter, 0.1875″ Shank Diameter #ad - Can be used for drilling, slotting, chamfering, and profile milling. Aluminum titanium nitride is similar to tialn but with a higher aluminum content for improved hardness and smoothness. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. Available in 60 degree points. Round shanks allow use with a wide variety of toolholding systems.

 

SHOP FOX M1110 6-Inch by 21-Inch Variable Speed Mill and Drill #ad

SHOP FOX M1110 6-Inch by 21-Inch Variable Speed Mill and Drill

SHOP FOX M1110 6-Inch by 21-Inch Variable Speed Mill and Drill #ad - Enjoy the precision ground dovetail column that allows for fast and easy tool changes without having to re-register the spindle centerline. These features combined with the outstanding x and y table travel of 5-3/4 x 15-1/2-inch make the m1110 mill/drill one of the most popular units available. A 3/4 hp reversible variable-speed universal motor drives an all-steel geared hi/lo range gearbox which drives the 60mm diameter quill and r-8 spindle. Made in an iso 9001 factory. The precision ground cast iron milling table with coolant troughs and drain will accept an aftermarket coolant system and power feed. The z-axis handwheel with the fully geared lift system easily lifts and lowers the headstock up to 14-3/4-inch.

 

Grizzly G0704 Drill Mill with Stand #ad

Grizzly G0704 Drill Mill with Stand

Grizzly G0704 Drill Mill with Stand #ad - Distance spindle to table 13″ • swing 15″ • table travel (longitudinal) 18-7/8″ • table travel (cross) 6-7/8″ • table size 7-1/16″ x 26-5/8″ • spindle speed 50-2250 rpm • approximate shipping weight 362 lbs. This great little machine sports some of the same features found on much larger mill/drills dovetail column, variable speed 1 hp motor, r-8 spindle with digital read out, tapered gibs with double locks, large 7-1/16″ x 26-5/8″ table and it comes with its own stand this is an excellent value and great for just starting out or even as a dedicated, single-purpose machine in the shop features • dovetail column • safety shut off switch • spindle speed dro • fine feed head control • 2-speed gearbox • clear guard on spindle • rubber chip guards on ways • zero setting dials • dials read inches • forward/reverse switch • stand with chip tray and cabinet measures 16″ l x 16″ w x 31″ h specifications • motor 1 hp, 110v, 12a, single-phase • spindle taper r-8 • spindle travel 2″ • t-slots 3 @ 2-1/2″ centers, 7/16″ wide • head travel 11″ • head tilt 90° l/r • max.

 

RedLine Tools RDM40316 - Drill Mill 90 Degree 25000 Length 2500 Diameter 7500 Flute Length 4 Flute Uncoated Carbide End Mill #ad

RedLine Tools RDM40316 – Drill Mill 90 Degree, 2.5000″ Length, .2500″ Diameter, .7500″ Flute Length, 4 Flute, Uncoated, Carbide End Mill

RedLine Tools RDM40316 – Drill Mill 90 Degree, 2.5000″ Length, .2500″ Diameter, .7500″ Flute Length, 4 Flute, Uncoated, Carbide End Mill #ad - Substrate/coating carbide / uncoated. Flute length 7500″. Made in the usa. Diameter 2500″. Number of flutes 4.

 

Drill America MMO316-4FSE-BN Solid Carbide End Mill Polished Finish 4 Flute Ball End 58 Cutting Length 316 Cutting Diameter 2 Length 316 Shank Pack of 1 #ad

Drill America MMO3/16-4FSE-BN Solid Carbide End Mill, Polished Finish, 4 Flute, Ball End, 5/8″ Cutting Length, 3/16″ Cutting Diameter, 2″ Length, 3/16″ Shank (Pack of 1)

Drill America MMO3/16-4FSE-BN Solid Carbide End Mill, Polished Finish, 4 Flute, Ball End, 5/8″ Cutting Length, 3/16″ Cutting Diameter, 2″ Length, 3/16″ Shank (Pack of 1) #ad - Available in polished finish. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. 4 flute single end ball. Round shanks allow use with a wide variety of toolholding systems. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging.

 

Drill America MMO332-4FDE-ST Solid Carbide End Mill Polished Finish 4 Flute Square End 316 Cutting Length 332 Cutting Diameter 1-12 Length 18 Shank Pack of 1 #ad

Drill America MMO3/32-4FDE-ST Solid Carbide End Mill, Polished Finish, 4 Flute, Square End, 3/16″ Cutting Length, 3/32″ Cutting Diameter, 1-1/2″ Length, 1/8″ Shank (Pack of 1)

Drill America MMO3/32-4FDE-ST Solid Carbide End Mill, Polished Finish, 4 Flute, Square End, 3/16″ Cutting Length, 3/32″ Cutting Diameter, 1-1/2″ Length, 1/8″ Shank (Pack of 1) #ad - Hex shanks have six flats on their sides to reduce slippage when working in high-torque applications. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Available in polished finish. 4 flute double end stub.

 

GOWE CNC Drill&Mill Machine20mm Drill Machine850W CNC Machine #ad

GOWE CNC Drill&Mill Machine/20mm Drill Machine/850W CNC Machine

GOWE CNC Drill&Mill Machine/20mm Drill Machine/850W CNC Machine #ad - Cnc drill&mill machine/20mm drill machine/850w cnc machine. Multi-purpose drill mills for drilling, milling, spotting, chamfering, and countersinking. Made in usa. Coated altin for extended tool life.

 

Drill America MMO316-2FSE-BN Solid Carbide End Mill Polished Finish 2 Flute Ball End 58 Cutting Length 316 Cutting Diameter 2 Length 316 Shank Pack of 1 #ad

Drill America MMO3/16-2FSE-BN Solid Carbide End Mill, Polished Finish, 2 Flute, Ball End, 5/8″ Cutting Length, 3/16″ Cutting Diameter, 2″ Length, 3/16″ Shank (Pack of 1)

Drill America MMO3/16-2FSE-BN Solid Carbide End Mill, Polished Finish, 2 Flute, Ball End, 5/8″ Cutting Length, 3/16″ Cutting Diameter, 2″ Length, 3/16″ Shank (Pack of 1) #ad - Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. 2 flute single end ball. Round shanks allow use with a wide variety of toolholding systems. Available in polished finish.

 

Drill America MMO12-2FSE Solid Carbide End Mill Polished Finish 2 Flute Square End 1 Cutting Length 12 Cutting Diameter 3 Length 12 Shank Pack of 1 #ad

Drill America MMO1/2-2FSE Solid Carbide End Mill, Polished Finish, 2 Flute, Square End, 1″ Cutting Length, 1/2″ Cutting Diameter, 3″ Length, 1/2″ Shank (Pack of 1)

Drill America MMO1/2-2FSE Solid Carbide End Mill, Polished Finish, 2 Flute, Square End, 1″ Cutting Length, 1/2″ Cutting Diameter, 3″ Length, 1/2″ Shank (Pack of 1) #ad - Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. Weldon shanks feature a round shank with one of more flats machined into the side for easy indexing and alignment. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. 2 flute single end. Available in polished finish.

 

Drill America MMO116-2FSE Solid Carbide End Mill Polished Finish 2 Flute Square End 14 Cutting Length 116 Cutting Diameter 1-12 Length 18 Shank Pack of 1 #ad

Drill America MMO1/16-2FSE Solid Carbide End Mill, Polished Finish, 2 Flute, Square End, 1/4″ Cutting Length, 1/16″ Cutting Diameter, 1-1/2″ Length, 1/8″ Shank (Pack of 1)

Drill America MMO1/16-2FSE Solid Carbide End Mill, Polished Finish, 2 Flute, Square End, 1/4″ Cutting Length, 1/16″ Cutting Diameter, 1-1/2″ Length, 1/8″ Shank (Pack of 1) #ad - Available in polished finish. Weldon shanks feature a round shank with one of more flats machined into the side for easy indexing and alignment. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. 2 flute single end.

 

Drill America MMO12-4FSE-BN Solid Carbide End Mill Polished Finish 4 Flute Ball End 1 Cutting Length 12 Cutting Diameter 3 Length 12 Shank Pack of 1 #ad

Drill America MMO1/2-4FSE-BN Solid Carbide End Mill, Polished Finish, 4 Flute, Ball End, 1″ Cutting Length, 1/2″ Cutting Diameter, 3″ Length, 1/2″ Shank (Pack of 1)

Drill America MMO1/2-4FSE-BN Solid Carbide End Mill, Polished Finish, 4 Flute, Ball End, 1″ Cutting Length, 1/2″ Cutting Diameter, 3″ Length, 1/2″ Shank (Pack of 1) #ad - Available in polished finish. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. Round shanks allow use with a wide variety of toolholding systems. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. 4 flute single end ball.

 

uxcell 1564 x 1564 Straight Shank 4 Flutes HSS End Mill Drill Bit #ad

uxcell 15/64″ x 15/64″ Straight Shank 4 Flutes HSS End Mill Drill Bit

uxcell 15/64″ x 15/64″ Straight Shank 4 Flutes HSS End Mill Drill Bit #ad - Package content 1 x straight shank end mill. Shank diameter 6mm/15/64”total length 58mm/23”. Color as picture shownweight 9g. Product name end millmaterial hss. Cutting diameter 6mm/15/64”cutting depth 24mm/094”.

 

Melin Tool AMG-DP1 Carbide Drill Mill AlTiN Monolayer Finish 30 Deg Point Angle 2 Flutes 25 Overall Length 025 Cutting Diameter 025 Shank Diameter #ad

Melin Tool AMG-DP1 Carbide Drill Mill, AlTiN Monolayer Finish, 30 Deg Point Angle, 2 Flutes, 2.5″ Overall Length, 0.25″ Cutting Diameter, 0.25″ Shank Diameter

Melin Tool AMG-DP1 Carbide Drill Mill, AlTiN Monolayer Finish, 30 Deg Point Angle, 2 Flutes, 2.5″ Overall Length, 0.25″ Cutting Diameter, 0.25″ Shank Diameter #ad - Available in 90 degree points. Aluminum titanium nitride is similar to tialn but with a higher aluminum content for improved hardness and smoothness. Round shanks allow use with a wide variety of toolholding systems. Can be used for drilling, slotting, chamfering, and profile milling. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems.

 

Micro 100 DM-375-290 2 Flute 90° Included Point Angle Drill Mill 38 Cutter Diameter 38 Shank Diameter 1 Flute Length 25 Overall Length Solid Carbide Tool #ad

Micro 100 DM-375-290 2 Flute 90° Included Point Angle Drill Mill, 3/8″ Cutter Diameter, 3/8″ Shank Diameter, 1″ Flute Length, 2.5″ Overall Length, Solid Carbide Tool

Micro 100 DM-375-290 2 Flute 90° Included Point Angle Drill Mill, 3/8″ Cutter Diameter, 3/8″ Shank Diameter, 1″ Flute Length, 2.5″ Overall Length, Solid Carbide Tool #ad - Designed and engineered to perform both drilling and milling applications when applicable. Each tool’s cutting edge/tip has a distinctive mirror like finish that significantly adds to material removal while improving surface finishes. Tools can be utilized for both roughing and finishing. For over 45 years, micro 100 is a known industry leader and internationally acclaimed when it comes to solid carbide tooling. Depending on the application, the drill mill can also be utilized as a chamfering tool as well. Their substrate is in a class of its own resulting from exclusive treating processes that allow for vastly increased speed and feed rates. Micro 100 solid carbide tools feature more than just a micro-grain of excellent quality. Manufactured with close tolerances to ensure ultimate precision and performance. The micro 100 dm-375-290 uncoated , 2 flute, solid carbide, 90° included point angle, drill mill.

 

Drill America MMO14-2FSE-BN Solid Carbide End Mill Polished Finish 2 Flute Ball End 34 Cutting Length 14 Cutting Diameter 2-12 Length 14 Shank Pack of 1 #ad

Drill America MMO1/4-2FSE-BN Solid Carbide End Mill, Polished Finish, 2 Flute, Ball End, 3/4″ Cutting Length, 1/4″ Cutting Diameter, 2-1/2″ Length, 1/4″ Shank (Pack of 1)

Drill America MMO1/4-2FSE-BN Solid Carbide End Mill, Polished Finish, 2 Flute, Ball End, 3/4″ Cutting Length, 1/4″ Cutting Diameter, 2-1/2″ Length, 1/4″ Shank (Pack of 1) #ad - 2 flute single end ball. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. Available in polished finish. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Round shanks allow use with a wide variety of toolholding systems.

 

Micro 100 DM-250-290X 90° Included Point Angle Drill Mill 2 Flute AlTiN Coated Solid Carbide Tool 14 Cutter Diameter 14 Shank Diameter 34 Flute Length 25 Overall Length #ad

Micro 100 DM-250-290X 90° Included Point Angle Drill Mill, 2 Flute, AlTiN Coated, Solid Carbide Tool, 1/4″ Cutter Diameter, 1/4″ Shank Diameter, 3/4″ Flute Length, 2.5″ Overall Length

Micro 100 DM-250-290X 90° Included Point Angle Drill Mill, 2 Flute, AlTiN Coated, Solid Carbide Tool, 1/4″ Cutter Diameter, 1/4″ Shank Diameter, 3/4″ Flute Length, 2.5″ Overall Length #ad - Applicable with oxidation temperatures up to 800° c or 1450° f. Altin coatings are best suited for alloy steels, stainless steels, tool steels, nickel alloys and titanium. Manufactured with close tolerances to ensure ultimate precision and performance. The micro 100 dm-250-290x altin, aluminum titanium nitride coated, 2 flute, solid carbide, 90° included point angle, drill mill. Has a higher breakdown temperature while maintaining high surface hardness at elevated temperatures. Depending on the application, the drill mill can also be utilized as a chamfering tool as well. Altin coatings are high performance and versatile. Designed and engineered to perform both drilling and milling applications when applicable. Tools can be utilized for both roughing and finishing. This type of coating also promotes tool life and allows for faster feeds and speeds. For over 45 years, micro 100 is a known industry leader and internationally acclaimed when it comes to solid carbide tooling. Micro 100 solid carbide tools feature more than just a micro-grain of excellent quality. Excellent for dry machining applications. Their substrate is in class of its own resulting from exclusive treating processes that allow increased speed and feed rates.

 

Magafor 8090 Carbide Drill Mill Uncoated Bright Finish 90 Deg Point Angle 2 Flutes 2-38 Overall Length 025 Cutting Diameter 516 Shank Diameter #ad

Magafor 8090 Carbide Drill Mill, Uncoated (Bright) Finish, 90 Deg Point Angle, 2 Flutes, 2-3/8″ Overall Length, 0.25″ Cutting Diameter, 5/16″ Shank Diameter

Magafor 8090 Carbide Drill Mill, Uncoated (Bright) Finish, 90 Deg Point Angle, 2 Flutes, 2-3/8″ Overall Length, 0.25″ Cutting Diameter, 5/16″ Shank Diameter #ad - Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. This multi use bits can be used for spotting, grooving, engraving, profiling, interpolation, drilling and chamfering. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.