Best and Coolest 21 Jacobs Chucks in 2020

 

58 Replacement Drill Chuck For Drill Press Jt3 Jt 3 Jacobs Taper

5/8″ Replacement Drill Chuck For Drill Press Jt3 Jt 3 Jacobs Taper …

5/8″ Replacement Drill Chuck For Drill Press Jt3 Jt 3 Jacobs Taper … - Arbor hole tapers from 80 inches at the opening (bottom of chuck) to 78 inches 1/2″ down into the arbor hole this gives a good fit profile for getting the correct chuck for your drill press. 1/32″, 5/8″ jt3 chuck. For those that prefer traditional keyed drill chucks, these chucks offer precision and nearly unlimited mechanical advantage for tightening and loosening drill bits and tooling these 1/32″, 5/8″ jt3 taper drill chucks have knurled grips and the chuck key is included. Fits mt3 taper arbors. Knurled grips chuck key included.

 

Jacobs Chuck 31416 High Torque and Precision Keyless Drill Chuck with Integrated Shank R8 Mount 0630 Maximum Capacity 2-18 Diameter x 3-2532 Closed Length

Jacobs Chuck 31416 High Torque and Precision Keyless Drill Chuck with Integrated Shank, R8 Mount, 0.630″ Maximum Capacity, 2-1/8″ Diameter x 3-25/32″ Closed Length

Jacobs Chuck 31416 High Torque and Precision Keyless Drill Chuck with Integrated Shank, R8 Mount, 0.630″ Maximum Capacity, 2-1/8″ Diameter x 3-25/32″ Closed Length - Right handed operation only. It makes impossible for the arbor and the drill chuck to become accidentally separated, providing a unit of greater rigidity and precision with. Arbor is integrated into the internal socket of the drill chuck. Self tightening feature automatically increases gripping force proportional to increased torque to prevent tool shank slippage. 100 percent individually controlled to ensure not to exceed a maximum total integrated run-out of 00016-inch.

 

JACOBS CHUCK - K30 CHUCK KEY - 403-3664

JACOBS CHUCK – K30 CHUCK KEY – 403-3664

JACOBS CHUCK – K30 CHUCK KEY – 403-3664 - Handle type thumb type key wt. 09 lb. 0.

 

Jacobs Chuck 9757 Rubber Flex Die Grinder Collet 332-1164 Capacity 1532 Contact Length 1932 OD

Jacobs Chuck 9757 Rubber Flex Die Grinder Collet, 3/32″-11/64″ Capacity, 15/32″ Contact Length, 19/32″ OD

Jacobs Chuck 9757 Rubber Flex Die Grinder Collet, 3/32″-11/64″ Capacity, 15/32″ Contact Length, 19/32″ OD - 15/32-inches contact length. 19/32-inches outside diameter. 3/32-inches minimum capacity, 11/64-inches maximum capacity. Rubber flex die grinder collet. Number of inserts 6. 26 degree cone angle.

 

Jacobs 2948 S-K3C Self-Ejecting T-Handle Chuck Key with 516-Inch Pilot-Size for Jacobs Series 3 3414N Keyed Chucks

Jacobs 2948 S-K3C Self-Ejecting T-Handle Chuck Key with 5/16-Inch Pilot-Size for Jacobs Series 3, 34,14N Keyed Chucks

Jacobs 2948 S-K3C Self-Ejecting T-Handle Chuck Key with 5/16-Inch Pilot-Size for Jacobs Series 3, 34,14N Keyed Chucks - Self ejecting key, pilot size 5/16 inch, used on numbers g2926217, g1944765, g2146304, g2578606, g2857267, g2578606, g0912247, g2394411.

 

Jacobs Chuck 14451 Heavy Duty Plain Bearing Taper Mounted Chuck 05 Maximum Capacity 2 Sleeve Diameter 3-4564 Close Length

Jacobs Chuck 14451 Heavy Duty Plain Bearing Taper Mounted Chuck, 0.5″ Maximum Capacity, 2″ Sleeve Diameter, 3-45/64″ Close Length

Jacobs Chuck 14451 Heavy Duty Plain Bearing Taper Mounted Chuck, 0.5″ Maximum Capacity, 2″ Sleeve Diameter, 3-45/64″ Close Length - Heavy duty plain bearing taper mounted chuck. Each chuck 100 percent inspected for performance and precision. One-piece sleeve eliminates crack between driving teeth often found in other designs. It has smooth sleeve with locking collar. Jaws center-ground for absolute straightness and alignment.

 

Jacobs Chuck 30354 38-Inch Keyless Chuck for 38-Inch 24 Thread Spindle

Jacobs Chuck 30354 3/8-Inch Keyless Chuck for 3/8-Inch 24 Thread Spindle

Jacobs Chuck 30354 3/8-Inch Keyless Chuck for 3/8-Inch 24 Thread Spindle - 375 in. , Mounting size 3/8-24, mounting type threaded, nominal capacity 3/8 in. , Capacity min. Drill chuck, keyless, steel, ball bearing, capacity max. 040 in.

 

Jacobs Chuck Key Holder 14

Jacobs Chuck Key Holder 1/4 “

Jacobs Chuck Key Holder 1/4 “ - More comfortable. Patented softgrip sleeve for easier tightening and better grip torque. 3/8 to 24 threaded mount. 3/8-inch capacity (10 to 10 mm).

 

Jacobs Chuck Key 38  1564  Pilot

Jacobs Chuck Key 3/8 ” 15/64 ” Pilot

Jacobs Chuck Key 3/8 ” 15/64 ” Pilot - Shank size 3 morse taper. 4-15/16-inches length. Morse taper arbor. Chuck (jacobs) taper 2jt mount. Ideal for use with custom tool, work holder designs and for specialized machining applications.

 

Genuine Jacobs Drill Chuck 364 - 12 15 - 13 mm Capacity with MT2 Morse Taper 2 Arbor Key

Genuine Jacobs Drill Chuck 3/64″ – 1/2″ 1.5 – 13 mm Capacity with MT2 Morse Taper 2 Arbor & Key

Genuine Jacobs Drill Chuck 3/64″ – 1/2″ 1.5 – 13 mm Capacity with MT2 Morse Taper 2 Arbor & Key - Keyed drill chuck, mounting type 1/2-20. Includes original jacobs key, may be thumb or t style, as available. Jacobs drill chuck with kk key, mounted on an mt2 / morse taper #2 arbor.

 

Jacobs 14442 34-02 12-Inch Heavy Duty Plain Bearing Keyed Chuck with No02 Jacobs Taper Mount

Jacobs 14442 34-02 1/2-Inch Heavy Duty Plain Bearing Keyed Chuck with No.02 Jacobs Taper Mount

Jacobs 14442 34-02 1/2-Inch Heavy Duty Plain Bearing Keyed Chuck with No.02 Jacobs Taper Mount - Each chuck is 100% inspected for precision performance. Through-hardened sleeve teeth and hardened chuck nose provide superior wear resistance. Chuck jaws are center-ground for absolute straightness and alignment. Chuck key included.

 

Jacobs Chuck 7314 Morse Taper Arbor 3 Morse x 2JT Mount 4-1516 Length

Jacobs Chuck 7314 Morse Taper Arbor, 3 Morse x 2JT Mount, 4-15/16″ Length

Jacobs Chuck 7314 Morse Taper Arbor, 3 Morse x 2JT Mount, 4-15/16″ Length - Shank size 3 morse taper. Ideal for use with custom tool, work holder designs and for specialized machining applications. Chuck (jacobs) taper 2jt mount. 4-15/16-inches length. Jacobs chuck morse taper arbor.

 

Jacobs Chuck Key L Shaped 14  14  Pilot

Jacobs Chuck Key L Shaped 1/4 ” 1/4 ” Pilot

Jacobs Chuck Key L Shaped 1/4 ” 1/4 ” Pilot - Morse taper arbor. Ideal for use with custom tool, work holder designs and for specialized machining applications. Chuck (jacobs) taper 2jt mount. Sold on amazon. Shank size 3 morse taper.

 

JACOBS CHUCK - K32 Chuck Key - 403-3666

JACOBS CHUCK – K32 Chuck Key – 403-3666

JACOBS CHUCK – K32 Chuck Key – 403-3666 - Price for each used on 32, 33 series and 11n chuck key size k32 item chuck key pilot size (in) 1/4 jacobs equivalent 3666 country of origin (subject to change) china. Commercial brand jacobs. Knobs, handles, workholding & machine tool accessories.

 

Jacobs Chuck 31248 Hex Bit Adapter Keyless Chuck 14 Mount 38 Capacity

Jacobs Chuck 31248 Hex Bit Adapter Keyless Chuck, 1/4″ Mount, 3/8″ Capacity

Jacobs Chuck 31248 Hex Bit Adapter Keyless Chuck, 1/4″ Mount, 3/8″ Capacity - Ideal for drilling holes and hard-to-reach spaces. Quick change chuck attachment enables impact drivers to be used in drill applications. Fits all round shank bits. Converts an impact driver into a drill. Plastic front and metal rear sleeves for greater durability.

 

Jacobs Drill Chuck Keyed Steel 58 In 3JT

Jacobs Drill Chuck, Keyed, Steel, 5/8 In, 3JT

Jacobs Drill Chuck, Keyed, Steel, 5/8 In, 3JT - Chuck jaws are center-ground for absolute straightness and alignment. Chuck key included. Each chuck is 100% inspected for precision performance. Through-hardened sleeve teeth and hardened chuck nose provide superior wear resistance.

 

Jacobs 3655 K4 Thumb Handle Chuck Key with 38-Inch Pilot-Size for Jacobs Series 36 16N 18N Keyed Chucks

Jacobs 3655 K4 Thumb Handle Chuck Key with 3/8-Inch Pilot-Size for Jacobs Series 36 ,16N, 18N Keyed Chucks

Jacobs 3655 K4 Thumb Handle Chuck Key with 3/8-Inch Pilot-Size for Jacobs Series 36 ,16N, 18N Keyed Chucks - Commercial brand jacobs. Made in taiwan. Knobs, handles, workholding & machine tool accessories.

 

Jacobs - USA Made 564 - 12 Capacity Multicraft Drill Chuck 33 Jacobs Taper Mount MU8K33

Jacobs – USA Made 5/64″ – 1/2″ Capacity Multicraft Drill Chuck 33 Jacobs Taper Mount MU8K33

Jacobs – USA Made 5/64″ – 1/2″ Capacity Multicraft Drill Chuck 33 Jacobs Taper Mount MU8K33 - Do not subject chuck key handles to hammer or other impact blows. Soft steel handles limit the potential for dangerous fracturing under excessive load. Never apply extensions, pliers, wrenches or ‘cheaters’ of any kind to chuck key handles. Sold on amazon. Self ejecting models with spring-loaded ejectors ensure key disengagement after tightening.

 

JBS3659 - Jacobs Chuck Mfg Co K7 Thumb-Handle Chuck Key

JBS3659 – Jacobs Chuck Mfg Co K7 Thumb-Handle Chuck Key

JBS3659 – Jacobs Chuck Mfg Co K7 Thumb-Handle Chuck Key - Resists tool loosening on high-speed machines with right hand rotation and instant spindle stop. Furnished with milled wrench flats and spanner wrench to allow the application of supplementary gripping torque. Precision tested and certified to 00016-inch tir maximum at half capacity. Sold on amazon. Use on cnc machining centers in drilling, boring, counter boring and milling opperations.

 

Jacobs Chuck Key 12  932  Pilot

Jacobs Chuck Key 1/2 ” 9/32 ” Pilot

Jacobs Chuck Key 1/2 ” 9/32 ” Pilot - Sold as 5 units at $4. 22 per unit. 1/2″. Manufacturer number 30250. ) Peggable card. Sku # 28113. 9/32″ pilot. Country of origin (tba). (1 unit = each. Distributed by danaher tool group.

 

JBS30598 - Jacobs Chuck Mfg Co Multi-Craft Drill Chuck

JBS30598 – Jacobs Chuck Mfg Co Multi-Craft Drill Chuck

JBS30598 – Jacobs Chuck Mfg Co Multi-Craft Drill Chuck - For corded or cordless reversible or non-reversible power drills. 078quot drill bit range max 1/2quot. Through-hardened jaws. Materials steel drill bit range min. Durable gripping surfaces.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.