Best Galvanized Bolt out of top 25 in 2020

 

8 Galvanized Hex Head 34 x 16 Lag Bolts Wood Screws

(8) Galvanized Hex Head 3/4 x 16 Lag Bolts Wood Screws

(8) Galvanized Hex Head 3/4 x 16 Lag Bolts Wood Screws - These hot dip galvanized fasteners are 3/4″ thread and are 16″ in length with a 6″ thread length and 1-1/8″ hex. Lot of (8) hex head lag bolts.

 

The Hillman Group 811530 Hot Dipped Galvanized Hex Bolt 14-Inch x 6-Inch 100-Pack

The Hillman Group 811530 Hot Dipped Galvanized Hex Bolt, 1/4-Inch x 6-Inch, 100-Pack

The Hillman Group 811530 Hot Dipped Galvanized Hex Bolt, 1/4-Inch x 6-Inch, 100-Pack - This bolt is compatible with standard nuts and washers of the same thread pitch, grade, and finish. These bolts are fully threaded. Hex bolts are bolts with hexagonal heads and machine threads for use with a nut or in a tapped hole.

 

Hillman 812558 Hot Dipped Galvanized Carriage Bolt 516 x 4-12-Inch Silver 50-Pack

Hillman 812558 Hot Dipped Galvanized Carriage Bolt, 5/16 x 4-1/2-Inch, Silver, 50-Pack

Hillman 812558 Hot Dipped Galvanized Carriage Bolt, 5/16 x 4-1/2-Inch, Silver, 50-Pack - Flat head provides a semi-flush finish to applications. Carriage bolts are designed to fasten a wooden face to either wood or metal. The heads is designed to eliminate the need for a washer. Galvanized finish is perfect for rust prevention. Square underside of the head is self locking to eliminate the need for a driving tool.

 

Prime-Line 9062450 Carriage Bolts 14 in-20 X 3 in A307 Grade A Hot Dip Galvanized Steel 50-Pack

Prime-Line 9062450 Carriage Bolts, 1/4 in.-20 X 3 in., A307 Grade A Hot Dip Galvanized Steel, 50-Pack

Prime-Line 9062450 Carriage Bolts, 1/4 in.-20 X 3 in., A307 Grade A Hot Dip Galvanized Steel, 50-Pack - Often used in cases where a protruding bolt head could cause injury. Square shoulder allows for nut to be tightened or loosened. Features a smooth rounded head as opposed to a standard hex head. Size 1/4 inch-20 x 3 inch. Nuts and washers not included, ensure washers and nuts are same diameter.

 

National Hardware N245-183 3260BC Eye Bolt in Galvanized

National Hardware N245-183 3260BC Eye Bolt in Galvanized

National Hardware N245-183 3260BC Eye Bolt in Galvanized - Bar code label is color coded to identify wire size. Designed with shoulder so that it can be tightened in place. Superior strength (swl) is clearly defined on label. Authorized replacement for stanley hardware stock #n245-183. Pintle punched for 5/16 in (1/2 in size) or 3/8 in (5/8 in size) bolts.

 

The Hillman Group 811598 Hot Dipped Galvanized Hex Bolt 38-Inch x 7-Inch 50-Pack

The Hillman Group 811598 Hot Dipped Galvanized Hex Bolt, 3/8-Inch x 7-Inch, 50-Pack

The Hillman Group 811598 Hot Dipped Galvanized Hex Bolt, 3/8-Inch x 7-Inch, 50-Pack - This bolt is compatible with standard nuts and washers of the same thread pitch, grade, and finish. These bolts are fully threaded. Hex bolts are bolts with hexagonal heads and machine threads for use with a nut or in a tapped hole.

 

Hillman Hardware Essentials 853110 Barrel Bolt Galvanized 5

Hillman Hardware Essentials 853110 Barrel Bolt Galvanized 5″

Hillman Hardware Essentials 853110 Barrel Bolt Galvanized 5″ - Comes with matching screws and mounting instructions. Use for right or left side applications. Tools required marking pencil, power drill, 1/16″ drill bit, and a handheld screwdriver. Used to secure left hand or right hand doors for doors, gates and more. #7 screws add strength and security. Size 5″. Made of a durable rust resistant steel material.

 

225 38x5 Carriage Bolts - Hot Dip Galvanized

(225) 3/8×5″ Carriage Bolts – Hot Dip Galvanized

(225) 3/8×5″ Carriage Bolts – Hot Dip Galvanized - Galvanized. Grade 2. Carriage bolts. 3/8×5″.

 

Hillman 812563 Galvanized Carriage Bolt 516 x 6 516 x 6-Inch

Hillman 812563 Galvanized Carriage Bolt 5/16″ x 6″, 5/16 x 6-Inch

Hillman 812563 Galvanized Carriage Bolt 5/16″ x 6″, 5/16 x 6-Inch - Galvanized finish is perfect for rust prevention. Square underside of the head is self locking to eliminate the need for a driving tool. The heads is designed to eliminate the need for a washer. Flat head provides a semi-flush finish to applications. Carriage bolts are designed to fasten a wooden face to either wood or metal.

 

Hillman 811596 Hot Dipped Galvanized Hex Bolt 38 X 6-Inch 50-Pack

Hillman 811596 Hot Dipped Galvanized Hex Bolt, 3/8 X 6-Inch, 50-Pack

Hillman 811596 Hot Dipped Galvanized Hex Bolt, 3/8 X 6-Inch, 50-Pack - Hex bolts are bolts with hexagonal heads and machine threads for use with a nut or in a tapped hole. This bolt is compatible with standard nuts and washers of the same thread pitch, grade, and finish. These bolts are fully threaded.

 

30 PCs Galvanized Hex Head 38 x 12 Lag Bolts Wood Screws Metric Hardware Fastener Kit

30 PCs Galvanized Hex Head 3/8 x 12″ Lag Bolts Wood Screws Metric Hardware Fastener Kit

30 PCs Galvanized Hex Head 3/8 x 12″ Lag Bolts Wood Screws Metric Hardware Fastener Kit - 100% satisfaction guarantee we offer a great choice of self-tapping screws, machine screws, socket head screws, hard drive screws, m3 m2 m4 screws, wood screws, sheet metal screws just select a couple and add to cart. Our professional license plate screws often located in a position that makes screw kit susceptible to corrosion and therefore is an obvious choice both regarding saving, appearance, and performance. Fantastic corrosion resistance a set screw is used widely in the home and office appliance, communication equipment and other machinery industry. Choose our deck screws for general purpose use they are intended for both manual and automatic screwing, twisting and tightening with the maximum force developed by any tool. Stainless steel concrete screws are reliable and durable and used in many applications it is widely used both for own repairs and for fixing parts of large production facilities.

 

Hillman 812632 12X8 Carriage Bolt 12 x 8-Inch Galvanized 25

Hillman 812632 1/2X8 Carriage Bolt, 1/2 x 8-Inch, Galvanized, 25

Hillman 812632 1/2X8 Carriage Bolt, 1/2 x 8-Inch, Galvanized, 25 - The heads is designed to eliminate the need for a washer. Galvanized finish is perfect for rust prevention. Square underside of the head is self locking to eliminate the need for a driving tool. Carriage bolts are designed to fasten a wooden face to either wood or metal. Flat head provides a semi-flush finish to applications.

 

Jake Sales Carriage Bolts 38-16 x 2-12 wNuts Galvanized Bulk Carriage Bolt ~ Coarse Thread 2 12 inches Long 100 Pieces

Jake Sales Carriage Bolts 3/8-16 x 2-1/2″: w/Nuts Galvanized Bulk Carriage Bolt ~ Coarse Thread (2 1/2 inches Long) (100 Pieces)

Jake Sales Carriage Bolts 3/8-16 x 2-1/2″: w/Nuts Galvanized Bulk Carriage Bolt ~ Coarse Thread (2 1/2 inches Long) (100 Pieces) - The 3/8″ galvanized nuts are included galvanized coating gives protection from corrosion. This carriage bolts 3/8-16 x 2-1/2″ w/ nuts galvanized carriage bolt ~ coarse thread is a 100 pack. Carriage bolts 3/8-16 x 2-1/2″ w/ nuts galvanized bulk carriage bolt ~ coarse thread (2 1/2 in). General use application these ones are a gray looking galvanized bolt easy to install. The tread pitch on these bolts is 16 (3/8-16) an everyday use 3/8″ coarse thread carriage bolt.

 

The Hillman Group 812592 Hot Dipped Galvanized Carriage Bolt 38-Inch x 6-12-Inch 50-Pack

The Hillman Group 812592 Hot Dipped Galvanized Carriage Bolt, 3/8-Inch x 6-1/2-Inch, 50-Pack

The Hillman Group 812592 Hot Dipped Galvanized Carriage Bolt, 3/8-Inch x 6-1/2-Inch, 50-Pack - They are used in wood connections utilizing the square neck under the round head which will sit into the hole to prevent the head from turning. These carriage bolts come plated in zinc for moderate corrosion resistance. Carriage bolts have a smooth, rounded head that has a small square section underneath.

 

Hillman 812581 Hot Dipped Galvanized Carriage Bolt 38 x 3-Inch Silver 50-Pack

Hillman 812581 Hot Dipped Galvanized Carriage Bolt, 3/8 x 3-Inch, Silver, 50-Pack

Hillman 812581 Hot Dipped Galvanized Carriage Bolt, 3/8 x 3-Inch, Silver, 50-Pack - Flat head provides a semi-flush finish to applications. Galvanized finish is perfect for rust prevention. The heads is designed to eliminate the need for a washer. Carriage bolts are designed to fasten a wooden face to either wood or metal. Square underside of the head is self locking to eliminate the need for a driving tool.

 

100 12x3 Carriage Bolts - Hot Dip Galvanized

(100) 1/2×3″ Carriage Bolts – Hot Dip Galvanized

(100) 1/2×3″ Carriage Bolts – Hot Dip Galvanized - Grade 2. Galvanized. Carriage bolts. 1/2×3″.

 

350 pcs 38 X 5 Hex Head Lag Screw Bolts Steel Hot Dip Galvanized

(350 pcs) 3/8″ X 5″, Hex Head Lag Screw Bolts, Steel, Hot Dip Galvanized

(350 pcs) 3/8″ X 5″, Hex Head Lag Screw Bolts, Steel, Hot Dip Galvanized - 36″shoulder diameter (maximum) 0. 1 and sae j429a note on our product images the copyrighted images are schematic representations. 25″shoulder diameter (minimum) 0. These are artistic renderings which may not reflect the exact appearance, proportions and/or relative dimensions of the actual products. 375″thread pitch 7length (nominal) 5″thread length (minimum) 3″across flats (basic) 9/16″head height 0. Diameter (nominal) 3/8″diameter (dimension) 0. For more precise imagery and/or technical references, please contact our customer support team. 388″shoulder length 0. 2. 125″product class externally threaded fastenersorder thread cutting fastenerscategory lag screwssystem of measurement us unitsbrand aspen fasteners®head style hex headdrive style external hex drivethread direction right-hand threadmaterial steelcoating hot dip galvanizedstandards and specifications asme b18.

 

CM M849G Super Strong Anchor Shackle with Galvanized Bolt Nut and Cotter 2 Ton Work Load Limit 716 Size

CM M849G Super Strong Anchor Shackle with Galvanized Bolt, Nut and Cotter, 2 Ton Work Load Limit, 7/16″ Size

CM M849G Super Strong Anchor Shackle with Galvanized Bolt, Nut and Cotter, 2 Ton Work Load Limit, 7/16″ Size - Shackles show major deformation before failure. All shackles have alloy quenched and tempered pins. Shackles meet dimensional requirements and exceed performance requirements of rr-c-271. Manufactured from technically advanced micro alloy steel with optimal hardness for strength and ductility. Working load limit and traceability codes shown as permanent markings on body.

 

58 x 12 Eye Bolt - Galvanized Steel

5/8″ x 12″ Eye Bolt – Galvanized Steel

5/8″ x 12″ Eye Bolt – Galvanized Steel - Used as an anchor point for connecting wire rope & other rigging hardware to a fixed ending point. Hole size 125″. Overall length 1469″ shaft length 1200″. Working load limit 5,200 lbs | break strength 26,000 lbs. Eye bolts are made of heavy duty galvanized steel for strength and durability this eyebolt does not have a shoulder so it is meant for straight line pulls only.

 

Hillman 812560 Hot Dipped Galvanized Carriage Bolt 516 x 5-Inch Silver 50-Pack

Hillman 812560 Hot Dipped Galvanized Carriage Bolt, 5/16 x 5-Inch, Silver, 50-Pack

Hillman 812560 Hot Dipped Galvanized Carriage Bolt, 5/16 x 5-Inch, Silver, 50-Pack - Galvanized finish is perfect for rust prevention. Square underside of the head is self locking to eliminate the need for a driving tool. Flat head provides a semi-flush finish to applications. Carriage bolts are designed to fasten a wooden face to either wood or metal. The heads is designed to eliminate the need for a washer.

 

12-13 X 7 Inch Hot Dipped Galvanized Hex Bolt 50 Pack - KC Building Supply

1/2″-13 X 7″ Inch Hot Dipped Galvanized Hex Bolt, 50 Pack – KC Building Supply

1/2″-13 X 7″ Inch Hot Dipped Galvanized Hex Bolt, 50 Pack – KC Building Supply - Hex bolts feature a six-sided head, which is designed to be tightened using a wrench or drill. Hot dipped galvanized finish or coating. This bolt is compatible with standard nuts and washers of the same thread pitch, grade, and finish or in a tapped hole with a compatible female thread.

 

12-13 x 15 Carriage BoltsSteelHot Dip Galvanized  25 Pc Carton

1/2-13 x 15″ Carriage Bolts/Steel/Hot Dip Galvanized / 25 Pc. Carton

1/2-13 x 15″ Carriage Bolts/Steel/Hot Dip Galvanized / 25 Pc. Carton - Grade 2 steel. Hot dip galvanized finish. 1/2-13 x 15 carriage bolts.

 

Hillman 812642 Hot Dipped Galvanized Carriage Bolt 12 x 16-Inch Silver 25-Pack

Hillman 812642 Hot Dipped Galvanized Carriage Bolt, 1/2 x 16-Inch, Silver, 25-Pack

Hillman 812642 Hot Dipped Galvanized Carriage Bolt, 1/2 x 16-Inch, Silver, 25-Pack - Galvanized finish is perfect for rust prevention. Square underside of the head is self locking to eliminate the need for a driving tool. Carriage bolts are designed to fasten a wooden face to either wood or metal. The heads is designed to eliminate the need for a washer. Flat head provides a semi-flush finish to applications.

 

US Cargo Control 12 Inch Galvanized Bolt Type Anchor Shackle - Each with a 2 Ton Capacity

US Cargo Control 1/2 Inch Galvanized Bolt Type Anchor Shackle – Each with a 2 Ton Capacity

US Cargo Control 1/2 Inch Galvanized Bolt Type Anchor Shackle – Each with a 2 Ton Capacity - Quantity 1 shackle. Safety factor 61. Material galvanized steel contains a thin coating of zinc oxide to protect steel from elements that lead to corrosion and oxidation. Working load limit 2 ton wll is embossed on each shackle never exceed the working load limit. Diameter 1/2″ | pin size 5/8″ | inside height 188″ | inside width 131″ | mouth width 081″ | weight 075 lbs shackles are sized accordingly to the diameter of the bow section rather than the pin size.

 

90 Galvanized Hex Head 516 x 4 Lag Bolts Wood Screws

(90) Galvanized Hex Head 5/16 x 4″ Lag Bolts Wood Screws

(90) Galvanized Hex Head 5/16 x 4″ Lag Bolts Wood Screws - Lot of (90) hex head lag bolts. These hot dip galvanized fasteners are 5/16″ thread and are 4″ in length with a 3-1/2″ thread length and 1/2″ hex.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.