Best Japanese Chisel out of top 24 in 2019

 

Matsumura Japanese White Steel Dovetail Chisel - 3mm - 18

Matsumura Japanese White Steel Dovetail Chisel – 3mm – 1/8″

Matsumura Japanese White Steel Dovetail Chisel – 3mm – 1/8″ - Matsumura dovetail chisel, 3mm, 1/8″. Handle of akagashi (japanese red oak) double hooped with a platinum colored steel ring at top. Cutting edge of shirogami hagane (white steel) hardened to rockwell c64. Overall length 9″, blade length is 2″. Matsumura chisels have consistently ranked at the top in reviews by fine woodworking magazine.

 

Shodo Japanese White Steel Bench Chisel - 12mm - 12

Shodo Japanese White Steel Bench Chisel – 12mm – 1/2″

Shodo Japanese White Steel Bench Chisel – 12mm – 1/2″ - Shodo a highly respected artisan in japan has a reputation superb edge tools. Shodo chisels are robust well-suited for daily use and offer a lifetime of service with proper care. Handles are hand turned from the center of japanese red oak which imparts great strength. Shodo white steel bench chisel with red oak handles hooped with satin hammered rings. Each chisel is hand forged by the maker of shirogami hagane (white steel) and wrought iron.

 

Matsumura Japanese White Steel Paring Chisel - 51mm - 2

Matsumura Japanese White Steel Paring Chisel – 51mm – 2″

Matsumura Japanese White Steel Paring Chisel – 51mm – 2″ - Traditional woodworkers use them to trim intricate joints to finished dimension. Mr. Matsumura hand forges each blade from the best quality “white” steel laminated onto wrought iron. Paring chisels are delicate and finely made and are used for finish and paring cuts. They are thenindividually tempered to rockwell rc 64. The average length is 14″ and the blade length is 3-1/2″. The “push” style handles are hand-turned from best quality akagashi (japanese red oak). Each chisel comesfully sharpened and polished.

 

Matsumura Japanese Blue Steel Bench Chisel - 18mm - 34

Matsumura Japanese Blue Steel Bench Chisel – 18mm – 3/4″

Matsumura Japanese Blue Steel Bench Chisel – 18mm – 3/4″ - Cutting edge of aogami hagane (blue steel) hardened to rockwell c64. Handle of akagashi (japanese red oak) double hooped with hammered steel ring at top. Overall length 9″, blade length is 2″. Ranked “best overall” in the japanese style chisel category in fine woodworking 200 chisel review. Matsumura bench chisel, 18mm, 3/4″.

 

Matsumura Japanese White Steel Dovetail Chisel - 9mm - 38

Matsumura Japanese White Steel Dovetail Chisel – 9mm – 3/8″

Matsumura Japanese White Steel Dovetail Chisel – 9mm – 3/8″ - Cutting edge of shirogami hagane (white steel) hardened to rockwell c64. Matsumura dovetail chisel, 9mm, 3/8″. Matsumura chisels have consistently ranked at the top in reviews by fine woodworking magazine. Overall length 9″, blade length is 2″. Handle of akagashi (japanese red oak) double hooped with a platinum colored steel ring at top.

 

Matsumura Japanese White Steel Dovetail Chisel - 9mm - 38

Matsumura Japanese White Steel Dovetail Chisel – 9mm – 3/8″

Matsumura Japanese White Steel Dovetail Chisel – 9mm – 3/8″ - Handle of akagashi (japanese red oak) double hooped with a platinum colored steel ring at top. Matsumura dovetail chisel, 9mm, 3/8″. Cutting edge of shirogami hagane (white steel) hardened to rockwell c64. Matsumura chisels have consistently ranked at the top in reviews by fine woodworking magazine. Overall length 9″, blade length is 2″.

 

Matsumura Japanese White Steel Paring Chisel - 6mm - 14

Matsumura Japanese White Steel Paring Chisel – 6mm – 1/4″

Matsumura Japanese White Steel Paring Chisel – 6mm – 1/4″ - Each chisel comesfully sharpened and polished. The average length is 14″ and the blade length is 3-1/2″. Traditional woodworkers use them to trim intricate joints to finished dimension. Mr. Matsumura hand forges each blade from the best quality “white” steel laminated onto wrought iron. They are thenindividually tempered to rockwell rc 64. The “push” style handles are hand-turned from best quality akagashi (japanese red oak). Paring chisels are delicate and finely made and are used for finish and paring cuts.

 

Matsumura Japanese White Steel Firmer Chisel - 15mm - 58

Matsumura Japanese White Steel Firmer Chisel – 15mm – 5/8″

Matsumura Japanese White Steel Firmer Chisel – 15mm – 5/8″ - Firmer chisels are used for carpentry and heavy cabinet and boat work. They are longer and made to a heavier pattern than are the bench chisels. Mr. The handles are best quality akagashi (japanese red oak), double hooped to prevent splitting. Matsumura uses the hokkaido pattern to give our firmer chisels a fine balance and provide the user with excellent control. Each firmer chisel is fully sharpened. The blades are tempered to rc 64 and are finished in the traditional fashion. Each blade is hand-forged from the best quality “white” steel laminated to wrought iron. The overall length is 12″ and the blade length is 3-1/2″.

 

Matsumura Japanese White Steel Dovetail Chisel - 45mm 316 in

Matsumura Japanese White Steel Dovetail Chisel – 4.5mm (3/16 in)

Matsumura Japanese White Steel Dovetail Chisel – 4.5mm (3/16 in) - Overall length 9″, blade length is 2″. Cutting edge of shirogami hagane (white steel) hardened to rockwell c64. Matsumura dovetail chisel, 9mm, 3/8″. Handle of akagashi (japanese red oak) double hooped with a platinum colored steel ring at top. Matsumura chisels have consistently ranked at the top in reviews by fine woodworking magazine.

 

Japanese Style Chisel Ou-Ire Nomi 9 mm Blade Material  High Speed Steel HSS

Japanese Style Chisel (Ou-Ire Nomi) 9 mm, Blade Material : High Speed Steel (HSS)

Japanese Style Chisel (Ou-Ire Nomi) 9 mm, Blade Material : High Speed Steel (HSS) - Made in japan. You can polish the blade with grinder or whetstone. ※Photo is a product of 24mm(09inch). Blade material high speed steel (hss). Blade width 9mm(04inch).

 

Japanese Style Chisel Ou-Ire Nomi 12 mm Blade Material  High Speed Steel HSS

Japanese Style Chisel (Ou-Ire Nomi) 12 mm, Blade Material : High Speed Steel (HSS)

Japanese Style Chisel (Ou-Ire Nomi) 12 mm, Blade Material : High Speed Steel (HSS) - â€»Photo is a product of 24mm(09inch). Blade material high speed steel (hss). Blade width 12mm(05inch). You can polish the blade with grinder or whetstone. Made in japan.

 

Matsumura Japanese White Steel Firmer Chisel - 36mm - 1-12

Matsumura Japanese White Steel Firmer Chisel – 36mm – 1-1/2″

Matsumura Japanese White Steel Firmer Chisel – 36mm – 1-1/2″ - The handles are best quality akagashi (japanese red oak), double hooped to prevent splitting. Firmer chisels are used for carpentry and heavy cabinet and boat work. Mr. Each blade is hand-forged from the best quality “white” steel laminated to wrought iron. The overall length is 12″ and the blade length is 3-1/2″. Each firmer chisel is fully sharpened. The blades are tempered to rc 64 and are finished in the traditional fashion. They are longer and made to a heavier pattern than are the bench chisels. Matsumura uses the hokkaido pattern to give our firmer chisels a fine balance and provide the user with excellent control.

 

Matsumura Japanese Blue Steel Bench Chisel - 12mm - 12

Matsumura Japanese Blue Steel Bench Chisel – 12mm – 1/2″

Matsumura Japanese Blue Steel Bench Chisel – 12mm – 1/2″ - Cutting edge of aogami hagane (blue steel) hardened to rockwell c64. Handle of akagashi (japanese red oak) double hooped with hammered steel ring at top. Matsumura bench chisel, 12mm, 1/2″. Overall length 9″, blade length is 2″. Ranked “best overall” in the japanese style chisel category in fine woodworking 200 chisel review.

 

Matsumura Japanese White Steel Bench Chisel - 15mm - 58

Matsumura Japanese White Steel Bench Chisel – 15mm – 5/8″

Matsumura Japanese White Steel Bench Chisel – 15mm – 5/8″ - Ranked number 1 out of 16 chisels reviewed in fine woodworking issue 139 for edge-holding. Overall length 9″, blade length is 2″. Matsumura bench chisel, 15mm, 5/8″. Handle of akagashi (japanese red oak) double hooped with blued steel ring at top. Cutting edge of shirogami hagane (white steel) hardened to rockwell c64.

 

Japanese Style Chisel Ou-Ire Nomi 6 mm Blade Material  High Speed Steel HSS

Japanese Style Chisel (Ou-Ire Nomi) 6 mm, Blade Material : High Speed Steel (HSS)

Japanese Style Chisel (Ou-Ire Nomi) 6 mm, Blade Material : High Speed Steel (HSS) - Made in japan. ※Photo is a product of 24mm(09inch). Blade width 6mm(02inch). You can polish the blade with grinder or whetstone. Blade material high speed steel (hss).

 

Japanese Style Chisel Ou-Ire Nomi 15mm Blade Material  High Speed Steel HSS

Japanese Style Chisel (Ou-Ire Nomi) 15mm, Blade Material : High Speed Steel (HSS)

Japanese Style Chisel (Ou-Ire Nomi) 15mm, Blade Material : High Speed Steel (HSS) - Made in japan. Blade width15mm(06inch). You can polish the blade with grinder or whetstone. Blade material high speed steel (hss). ※Photo is a product of 24mm(09inch).

 

Matsumura Japanese White Steel Paring Chisel - 9mm - 38

Matsumura Japanese White Steel Paring Chisel – 9mm – 3/8″

Matsumura Japanese White Steel Paring Chisel – 9mm – 3/8″ - The average length is 14″ and the blade length is 3-1/2″. Each chisel comesfully sharpened and polished. Traditional woodworkers use them to trim intricate joints to finished dimension. Paring chisels are delicate and finely made and are used for finish and paring cuts. Mr. Matsumura hand forges each blade from the best quality “white” steel laminated onto wrought iron. The “push” style handles are hand-turned from best quality akagashi (japanese red oak). They are thenindividually tempered to rockwell rc 64.

 

Japanese Style Chisel Ou-Ire Nomi 30 mm Blade Material  High Speed Steel HSS

Japanese Style Chisel (Ou-Ire Nomi) 30 mm, Blade Material : High Speed Steel (HSS)

Japanese Style Chisel (Ou-Ire Nomi) 30 mm, Blade Material : High Speed Steel (HSS) - Blade width 30mm(12inch). ※Photo is a product of 24mm(09inch). Made in japan. Blade material high speed steel (hss). You can polish the blade with grinder or whetstone.

 

Japanese Bench Chisel 48mm

Japanese Bench Chisel, 48mm

Japanese Bench Chisel, 48mm - Made in the same manner they have been for centuries, japanese chisels are individually tempered to rc 62-64 by a master craftsman. Each chisel is sharpened to a razor edge, ready to use and fitted with a hand-forged, hooped japanese red oak handle. Made of durable white (high-carbon) steel laminated onto a softer steel back for added strength, these bench chisels sharpen easily and hold an edge longer than western chisels. Handle ends are pre-peened over the hoop and ready to use. Chisels measure 9″ long with a 2-1/4″ blade length.

 

Japanese Wood Carving Chisel Bent-Flat Type 30 mm with Shirogami Steel Edge and Japanese Evergreen Oak Handle

Japanese Wood Carving Chisel Bent-Flat Type 30 mm with Shirogami Steel Edge and Japanese Evergreen Oak Handle

Japanese Wood Carving Chisel Bent-Flat Type 30 mm with Shirogami Steel Edge and Japanese Evergreen Oak Handle - Bent-flat blade, for carving wood. Blade width 30mm (118 inch). Made in japan. For professinals . Blade edge material shirogami steel no2 (white steel/ high carbon steel).

 

RIGORO Japanese Chisel NOMI OIRE 3 in 1 set by KAKURI

RIGORO Japanese Chisel NOMI OIRE 3 in 1 set by KAKURI

RIGORO Japanese Chisel NOMI OIRE 3 in 1 set by KAKURI - Rigoro japanese chisel nomi oire 3 in 1 set.

 

Narex Czech Steel Dovetail Japanese Style Chisel 14 12 34 813507-19 14

Narex Czech Steel Dovetail Japanese Style Chisel 1/4″, 1/2″ 3/4″ 813507-19 (1/4″)

Narex Czech Steel Dovetail Japanese Style Chisel 1/4″, 1/2″ 3/4″ 813507-19 (1/4″) - Blades ground with acute 35 degree angles along both sides of the blades for clearance into corners. Made by a highlly respected cutting tool anufacturer in the czech republic. Available in the following sizes 1/4, 1/2″ and 3/4″. Blades are made from fine-grained, nicely tempered chrome-manganese steel and hardened to rc 59. Handles are made from stained european beechwood.

 

Japanese Style wood craft Chisel Kibori Nomi  Blade Material  Shirogami steel 36mm

Japanese Style wood craft Chisel (Kibori Nomi) , Blade Material : Shirogami steel (36mm)

Japanese Style wood craft Chisel (Kibori Nomi) , Blade Material : Shirogami steel (36mm) - Blade material shirogami steel no2 (white steel/ high carbon steel). Blade width 36 mm (14inch). Made in japan.

 

Matsumura Japanese White Steel Mortise Chisel - 6mm - 14

Matsumura Japanese White Steel Mortise Chisel – 6mm – 1/4″

Matsumura Japanese White Steel Mortise Chisel – 6mm – 1/4″ - Mortise chisels are made with a square section and a heavy body. They are intended for deep mortise work in carpentry and heavy cabinet work. Matsumura handforges these blades from “white” steel laminated to wrought iron and tempers each blade to rc 64. Mr. The handles are double hooped to stand-up to heavy work. The handles are hand-turned from best quality akagashi (japanese red oak), noted for its strength and endurance. Each mortise chisel is fully sharpened. The overall length is 12″ and the blade length is 3-1/2″. The blades are finished in the traditional manner.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.