Coolest 15 Benders in 2019

 

Gardner Bender CTT-45 Cable Tie Tensioning Tool #ad

Gardner Bender CTT-45 Cable Tie Tensioning Tool

Gardner Bender CTT-45 Cable Tie Tensioning Tool #ad - Easy and simple use kit. Lightweight, economical. Quick twist snaps off excess length. The product is cable tie tension tool. Use for all cable ties up to 75 lbs. The product is manufactured in china.

 

Gardner Bender GS-40 Wire Stripper with Spring 24-10 AWG #ad

Gardner Bender GS-40 Wire Stripper with Spring, 24-10 AWG

Gardner Bender GS-40 Wire Stripper with Spring, 24-10 AWG #ad - 5″. Includes spring return and lock. Hardened spring steel tool cuts and strips eight wire sizes 10-24 gauge. Star-wheel gauge easily adjusts to wire size without adjusting nut & bolt assembly.

 

Gardner Bender GBT-502A Household Battery Tester #ad

Gardner Bender GBT-502A Household Battery Tester

Gardner Bender GBT-502A Household Battery Tester #ad - Testing equipment can be put to good use ensuring that electrical equipment is properly installed and safe to operate. Faulty installations can be lethal the condition of electrical installations can be established when contractors use test equipment. Gardner bender is please to offer an innovative full feature line of test equipment designed to make electrical work faster and safer.

 

Gardner Bender GCC-120 12-Inch Two Hole Plastic Straps 20-Pack #ad

Gardner Bender GCC-120 1/2-Inch Two Hole Plastic Straps, 20-Pack

Gardner Bender GCC-120 1/2-Inch Two Hole Plastic Straps, 20-Pack #ad - Heavy duty polyethylene. Resists deterioration from uv rays and breakage from extreme cold. Enables secure fastening of plastic electrical conduit, schedule 40 pvc, copper tubing, etc. 1/2-inch. 20 per bag.

 

General Tools S106 Tubing Bender Set #ad

General Tools S106 Tubing Bender Set

General Tools S106 Tubing Bender Set #ad - The tubing benders are made from oil hardened and tempered spring steel with a zinc-plated finish. For best results, general recommends using one bender over the tube and an additional bender inside the tube. Steel spring tubing benders are a simple and effective means of bending thin-wall tubing without crimping or collapsing the pipe. Tube size outside diameters are 1/4, 5/16, 3/8, 7/17, 1/2, and 5/8 inches. This set contains 6″popular bending sizes capable of making bends up to 180 degrees.

 

Aluminum Die Cast Conduit Bender 8 Degree Inside Radius For 1 EMT or 34 Rigid #ad

Aluminum Die Cast Conduit Bender, 8 Degree Inside Radius, For 1″ EMT or 3/4″ Rigid

Aluminum Die Cast Conduit Bender, 8 Degree Inside Radius, For 1″ EMT or 3/4″ Rigid #ad - Conduit bender have cast in-angle indicators with raised bending points of reference to aid the installer. The bodies are aluminum die cast which are lightweight yet strong enough for everyday use. 8 degree inside radius. Conduit bender is for 1-inches electrical metallic tubing (emt) or 3/4-inches rigid.

 

hilmor 1926598 Compact Bender Kit with Reverse Bending Attachment #ad

hilmor 1926598 Compact Bender Kit with Reverse Bending Attachment

hilmor 1926598 Compact Bender Kit with Reverse Bending Attachment #ad - Small-space capabilities, one-handed operation and precise bends, you get it all. The hilmor compact bender will help you get the job done right, from start to finish. A universal crossbar and color-coded mandrels provide simple setup and easy size identification. You can count on precise bends of 1/4″, 5/16″, 3/8″, 1/2″, 5/8″, 3/4″ and 7/8″ tubing up to 90degree or 7/8″ mandrels. Small in size. An advanced mandrel design and quick-release mechanism allow for an easy tube release. Big on advantages.

 

Gardner Bender 10-107 Terminal Ring 12-10 AWG Stud Sz 12-14 Yellow  50 pk #ad

Gardner Bender 10-107 Terminal Ring, 12-10 AWG, Stud Sz 12-1/4, Yellow (50 pk)

Gardner Bender 10-107 Terminal Ring, 12-10 AWG, Stud Sz 12-1/4, Yellow (50 pk) #ad - Rated at 600 volt max. Gardner bender ring terminals- vinyl-insulated barrel. Temperature rating 167 °f (75 °c).

 

Gardner Bender MSG-501 Heavy-Duty Cable Boss Staple Gun Professional Grade Secures NM Coax Low-Volt Cable Red #ad

Gardner Bender MSG-501 Heavy-Duty Cable Boss Staple Gun, Professional Grade, Secures (NM) Coax, & Low-Volt Cable, Red

Gardner Bender MSG-501 Heavy-Duty Cable Boss Staple Gun, Professional Grade, Secures (NM) Coax, & Low-Volt Cable, Red #ad - Cable boss staple gun, secures 120v & low volt cable, romex, coaxial & cat 5 from the same tool, comfort grip areas for 2 handed operation, easy trigger force, ergonomic handle, secures round & flat cable, 3 sizes covering nm, coax, voice/data & low volt. .

 

Greenlee 841AH Site Rite Aluminum Hand Bender With Handle For 34 EMT 12 RigidIMC #ad

Greenlee 841AH Site Rite Aluminum Hand Bender With Handle For 3/4″ EMT, 1/2″ Rigid/IMC

Greenlee 841AH Site Rite Aluminum Hand Bender With Handle For 3/4″ EMT, 1/2″ Rigid/IMC #ad - All the bender handles are a consistent diameter, offering a bigger grip area, while still straight up and down for fast 30 degree bends. Greenlee lifetime limited warranty. Capacity 3/4″ emt, 1/2″ rigid/imc. A strong stable square hook design. The aluminum and iron 1/2″, 3/4″ and 1″ bender heads all have enlarged foot pedals and increased toe room to ensure greater control, stability and leverage.

 

Aluminum Die Cast Conduit Bender 6 Degree Inside Radius For 34 EMT or 12 Rigid #ad

Aluminum Die Cast Conduit Bender, 6 Degree Inside Radius, For 3/4″ EMT or 1/2″ Rigid

Aluminum Die Cast Conduit Bender, 6 Degree Inside Radius, For 3/4″ EMT or 1/2″ Rigid #ad - The bodies are aluminum die cast which are lightweight yet strong enough for everyday use. Conduit bender have cast in-angle indicators with raised bending points of reference to aid the installer. 6 degree inside radius. Conduit bender is for 3/4-inches electrical metallic tubing (emt) or 1/2-inches rigid.

 

Gardner Bender DS-110N Duct Seal 1 lb Pug #ad

Gardner Bender DS-110N Duct Seal, 1 lb. Pug

Gardner Bender DS-110N Duct Seal, 1 lb. Pug #ad - Easy and simple use kit. Malleable non-conductive compound for sealing of electrical raceway connections from air, noise and moisture. The product is manufactured in china. Patented design and high-quality construction. Gardner bender duct seal. The product is duct seal lb comp plug.

 

SE 8593WB Wire Bender With 4 Pins 7 Piece #ad

SE 8593WB Wire Bender With 4 Pins (7 Piece)

SE 8593WB Wire Bender With 4 Pins (7 Piece) #ad - Wire bending tool is designed to handle steel and softer wires up to 1/4 inch in diameter. Triangle shape bends wire up to 90°. Straight channels bend wire up to 90°. Half round shape bends wire into large curves. Interchangeable peg location bends wire into a variety of curves.

 

OTC 6515 3-in-1 180 Degree Heavy Duty Tubing Bender #ad

OTC 6515 3-in-1 180 Degree Heavy Duty Tubing Bender

OTC 6515 3-in-1 180 Degree Heavy Duty Tubing Bender #ad - Capable of making 180 degree bends in copper brass aluminum and steel tubing. Lifetime limited warranty. Just one tool works on three sizes of tubing 1/4″ 5/16″ and 3/8″.

 

Gardner Bender LTW-400 Liquid Tape 4-Ounce White #ad

Gardner Bender LTW-400 Liquid Tape, 4-Ounce, White

Gardner Bender LTW-400 Liquid Tape, 4-Ounce, White #ad - Great for home, auto/marine and electrical applications indoor/outdoor. Liquid electrical tape. Rubber based coating will not harden. Indoor/outdoor use. Superior quality at an affordable price. A liquid coating used to insulate and protect electrical splices and connections.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.