Coolest 15 Carbide Turning Tools in 2019

 

Savannah 3 Piece Large Carbide Turning Tool Set #ad

Savannah 3 Piece Large Carbide Turning Tool Set

Savannah 3 Piece Large Carbide Turning Tool Set #ad - The solid wood ash handle is coated with a comfortable rubber grip on the base that transitions to the wooden top part of the handle seamlessly. 99 each. The savannah carbide turning tools eliminate the need for sharpening of your turning tools since it features a rotatable cutter head. With the savannah large carbide turning tool, you can get right to turning without all the fuss. Set includes the large round (# 7537), square (# 7538) and diamond (# 7539) cutter tools, each of which can be purchased separately for $89. All you have to do is rotate the the cutter head for a clean, sharp edge and continue turning. To make turning even more enjoyable, the shaft of the savannah carbide turning tool also features a flat back for stability while your turning. The comfortable rubber grip helps reduce hand fatigue while turning. Once the cutter head is completely used, simply replace it with a new carbide cutter. It is ideal for wood turners of all skill levels and helps ensure success right from the start. The savannah large carbide turning tools are designed with ease of use in mind. The solid carbide stays sharper for a longer period of time in comparison to steel tools.

 

Individual Indexable Carbide Turning Tool - SHANK 750 SQ Overall Length  4-12 #ad

Individual Indexable Carbide Turning Tool – SHANK: .750″ SQ Overall Length : 4-1/2″

Individual Indexable Carbide Turning Tool – SHANK: .750″ SQ Overall Length : 4-1/2″ #ad - 5x overall length 4-1/2″ cutting direction left hand insert ic 3/8″. 750″ sq use insert # tcmt-32. Shank.

 

Individual Indexable Carbide Turning Tool - SHANK 3750 SQ Overall Length  212 #ad

Individual Indexable Carbide Turning Tool – SHANK: .3750″ SQ Overall Length : 2/1/2″

Individual Indexable Carbide Turning Tool – SHANK: .3750″ SQ Overall Length : 2/1/2″ #ad - Shank. 3750″ sq use insert # tcmt-21. 5x overall length 2/1/2″ cutting direction left hand insert ic 1/4″.

 

Square Carbide Mini Turning Tool #ad

Square Carbide Mini Turning Tool

Square Carbide Mini Turning Tool #ad - Diameter of square cutter is 3/8″. The solid carbide cutter also stays sharp for longer when compared with steel, giving you a much longer useful life. Total overall length of mini turning tool is approximately 13-1/2″. The handles are made of solid ash encased with a thick, molded rubber end for an enhanced grip and reduced fatigue. Ash handles are coated with a soft, grippy rubber for a secure, effortless grip and excellent ergonomics. Simply rotate the carbide cutter for a fresh, sharp edge, and replace it once all available edges have grown dull. Shaft features a flattened back for stability when using the tool rest. Ash handles are 9-1/2″ long from the butt of the handle to the top of the stainless steel ferrule. Technical details ideal profile for flat or convex areas on spindles and pen turnings. Length of the shaft is approximately 4″.   Also available from rockler round carbide mini turning tool diamond carbide mini turning tool carbide mini turning tool 3-piece set. This square carbide mini turning tool from rockler features a replaceable and rotatable cutter that eliminates the hassle and downtime of sharpening. Note carbide cutters are not interchangeable between the different tools.

 

Individual Indexable Carbide Turning Tool - SHANK 6250 SQ Overall Length  4 #ad

Individual Indexable Carbide Turning Tool – SHANK: .6250″ SQ Overall Length : 4″

Individual Indexable Carbide Turning Tool – SHANK: .6250″ SQ Overall Length : 4″ #ad - 6250″ sq use insert # tcmt-32. 5x overall length 4″ cutting direction left hand insert ic 3/8″. Shank.

 

Individual Indexable Carbide Turning Tool - SHANK 500 SQ Overall Length  3-12 #ad

Individual Indexable Carbide Turning Tool – SHANK: .500″ SQ Overall Length : 3-1/2″

Individual Indexable Carbide Turning Tool – SHANK: .500″ SQ Overall Length : 3-1/2″ #ad - Shank. 500″ sq use insert # tcmt-32. 5x overall length 3-1/2″ cutting direction neutral insert ic 3/8″.

 

Individual Indexable Carbide Turning Tool - SHANK 750 SQ Overall Length  4-12 #ad

Individual Indexable Carbide Turning Tool – SHANK: .750″ SQ Overall Length : 4-1/2″

Individual Indexable Carbide Turning Tool – SHANK: .750″ SQ Overall Length : 4-1/2″ #ad - 750″ sq use insert # tcmt-32. 5x overall length 4-1/2″ cutting direction right hand insert ic 3/8″. Shank.

 

HB Rouse 5 Pc 14 Shank Indexable Carbide Turning Tool Set #ad

H.B. Rouse 5 Pc. 1/4″ Shank Indexable Carbide Turning Tool Set

H.B. Rouse 5 Pc. 1/4″ Shank Indexable Carbide Turning Tool Set #ad - Color silver tone, blue. Package content 2 x turning tool holders. Net weight 204g. Hb rouse 5 pc 1/4″ shank indexable carbide turning tool set. Overall size 90 x 12 x 12mm/35″ x 047″ x 047″(l wt).

 

Savannah Large Diamond Carbide Turning Tool #ad

Savannah Large Diamond Carbide Turning Tool

Savannah Large Diamond Carbide Turning Tool #ad - The savannah large carbide turning tool is designed with ease of use in mind. Once the cutter head is completely used, simply replace it with a new carbide cutter (item # 10754). The solid wood ash handle is coated with a comfortable rubber grip on the base that transitions to the wooden top part of the handle seamlessly. The large diamond cutter (item # 10754) perfect for achieving smooth finishes in tight, small areas like detailed beads and coves in spindle turnings. The comfortable rubber grip helps reduce hand fatigue while turning. To make turning even more enjoyable, the shaft of the savannah carbide turning tool also features a flat back for stability while your turning. It is ideal for wood turners of all skill levels and helps ensure success right from the start. With the savannah large carbide turning tool, you can get right to turning without all the fuss. All you have to do is rotate the the cutter head for a clean, sharp edge and continue turning. The savannah diamond carbide turning tool eliminates the need for sharpening of your turning tools since it features a rotatable cutter head. 7539 features • sharpening not necessary • last longer than steel tools • replaceable cutter heads • solid ash handle is coated with a soft rubber grip • shaft length is approximately 6-1/2″ • handle length is approximately 13-1/2″ from the butt to the stainless steel ferrule • diamond carbide cutter head included please note the carbide cutter on this tool is not interchangeable with any of the other savannah carbide turning tools (7537,7538 & 7540). The solid carbide stays sharper for a longer period of time in comparison to steel tools.

 

Savannah Large Square Carbide Turning Tool #ad

Savannah Large Square Carbide Turning Tool

Savannah Large Square Carbide Turning Tool #ad - The savannah large square carbide turning tool eliminates the need for sharpening of your turning tools since it features a rotatable cutter head. All you have to do is rotate the the cutter head for a clean, sharp edge and continue turning. To make turning even more enjoyable, the shaft of the savannah carbide turning tool also features a flat back for stability while your turning. It is ideal for wood turners of all skill levels and helps ensure success right from the start. The comfortable rubber grip helps reduce hand fatigue while turning. The large square cutter (item # 10750) is ideal for smoothing out cuts and for working convex surfaces with it’s slightly rounded profile. Once the cutter head is completely used, simply replace it with a new carbide cutter (item # 10750). 7538 features • sharpening not necessary • last longer than steel tools • replaceable cutter heads • solid ash handle is coated with a soft rubber grip • shaft length is approximately 6-1/2″ • handle length is approximately 13-1/2″ from the butt to the stainless steel ferrule • square carbide cutter head included please note the carbide cutter on this tool is not interchangeable with any of the other savannah carbide turning tools (7537,7539 & 7540). The solid carbide stays sharper for a longer period of time in comparison to steel tools. The solid wood ash handle is coated with a comfortable rubber grip on the base that transitions to the wooden top part of the handle seamlessly. With the savannah large carbide turning tool, you can get right to turning without all the fuss. The savannah large carbide turning tool is designed with ease of use in mind.

 

7 Pc 58 Indexable Carbide Turning Lathe Tool Set SCLCL SDJCR SWGCR SDNCN #ad

7 Pc 5/8” Indexable Carbide Turning Lathe Tool Set SCLCL SDJCR SWGCR SDNCN

7 Pc 5/8” Indexable Carbide Turning Lathe Tool Set SCLCL SDJCR SWGCR SDNCN #ad - Carbide inserts length4-1/2”longcarbide inserts include(1)sclcl 5/8″(1)sdncn 5/8″(1)sdjcr 5/8″. (1) sclcr 5/8″(1) swgcr 5/8”(1) ser 5/8”-16(1) mgehr 5/8”-3. Quantity 1 shipping weight415 lbs. Case includedcase overall dimension 5-5/8”l x 10”w x 1-3/8”h. 7 pc 5/8” indexable carbide turning tool set.

 

7 Pc 38 Indexable Carbide Turning Tool Set SCLCL SDJCR SWGCR SDNCN MGEHR SER #ad

7 Pc 3/8” Indexable Carbide Turning Tool Set SCLCL SDJCR SWGCR SDNCN MGEHR SER

7 Pc 3/8” Indexable Carbide Turning Tool Set SCLCL SDJCR SWGCR SDNCN MGEHR SER #ad - Carbide inserts length3″ longcarbide inserts includes(1) sclcl 3/8″(1) sdncn 3/8″(1)sdjcr 3/8″. 7 pc 3/8” indexable carbide turning tool set. Case includedcase overall dimension 5”-7/8l x 7”w x 1-3/8”h. (1) sclcr 3/8″(1) swgcr 3/8”(1) ser 3/8”-11(1) mgehr 3/8”-2. Quantity 1 shipping weight 14 lbs.

 

YUFU-TOOL Wood Working Reversible Index-able Carbide Inserts14mm lengthX14mm widthX20mm thickness Pack of 1 Designed for SpiralHelical Planer Cutter Head wood turning lathe tool #ad

YUFU-TOOL Wood Working Reversible Index-able Carbide Inserts(14mm lengthX14mm widthX2.0mm thickness) ,Pack of 1, Designed for Spiral/Helical Planer Cutter Head, wood turning lathe tool

YUFU-TOOL Wood Working Reversible Index-able Carbide Inserts(14mm lengthX14mm widthX2.0mm thickness) ,Pack of 1, Designed for Spiral/Helical Planer Cutter Head, wood turning lathe tool #ad - Designed for numerous spiral/helical planer cutter head system and diy wood lathe turning tools. Holds a cutting edge up to 20 times longer than hss. Easy to replace your jointers and planers, excellent accessory for wood turning work. Made of solid tungsten carbide, providing you a better experience and durable use. Four usable sides(14mm length x14mm width), and all are of the same sharpness.

 

1 Indexable Carbide Insert Turning Tool Bit Set #ad

1″ Indexable Carbide Insert Turning Tool Bit Set

1″ Indexable Carbide Insert Turning Tool Bit Set #ad - This 1 inch indexible turning tool set contains 5 tcmt32. 52 inserts made of c6 carbide material. There is one each of ar, al, br, bl and e, 5 pcs spare screws, 2 l wrench, a and built-in chipbreaker groove is included.

 

Individual Indexable Carbide Turning Tool - SHANK 500 SQ Overall Length  3-12 #ad

Individual Indexable Carbide Turning Tool – SHANK: .500″ SQ Overall Length : 3-1/2″

Individual Indexable Carbide Turning Tool – SHANK: .500″ SQ Overall Length : 3-1/2″ #ad - 5x overall length 3-1/2″ cutting direction left hand insert ic 3/8″. Shank. 500″ sq use insert # tcmt-32.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.