Top 15 Best Carbide Tipped Saws

 

AGE Series by Amana Tool MD10-500 Combination 10-Inch Diameter by 50-Teeth by 58-Inch Bore 4&1 Grind Carbide Tipped Saw Blade

A.G.E. Series by Amana Tool MD10-500 Combination 10-Inch Diameter by 50-Teeth by 5/8-Inch Bore, 4&1 Grind Carbide Tipped Saw Blade

A.G.E. Series by Amana Tool MD10-500 Combination 10-Inch Diameter by 50-Teeth by 5/8-Inch Bore, 4&1 Grind Carbide Tipped Saw Blade - 126-inch kerf, 087-inch plate. Designed to rip and crosscut hardwoods, softwoods, as well as sheet stock such as plywood and particleboard. Carbide tipped, industrial quality. 15-degree hook angle, 5/8-inch bore, combination 4+1 grind. 10-inch diameter, 50-teeth.

 

Tenryu PT-21060 8 Carbide Tipped Saw Blade  60 Tooth ATAF Grind - 58Ko Arbor - 0079 Kerf

Tenryu PT-21060 8″ Carbide Tipped Saw Blade ( 60 Tooth ATAF Grind – 5/8″Ko Arbor – 0.079 Kerf)

Tenryu PT-21060 8″ Carbide Tipped Saw Blade ( 60 Tooth ATAF Grind – 5/8″Ko Arbor – 0.079 Kerf) - High-grade, c-3, fine-grain tungsten carbide tips resist erosion for extended blade life. Fully hardened, expertly tensioned tool steel bodies absorb impact, remain flat and true, and resist excess heat build-up. Thin kerf for less waste and lighter cutting performance (reduced feed pressure). Aggressive rake angles for maximum cutting speed and efficiency. Each tip is precision honed on all four exposed surfaces this minimizes micro-chipping along the sharp edge of the blade and results in a sharper, longer-lasting edge.

 

AGE Series MD10-601 PlywoodLaminate 10-Inch Diameter by 60-Teeth by 58-Inch Bore Triple Chip Grind Carbide Tipped Saw Blade

A.G.E. Series MD10-601 Plywood/Laminate 10-Inch Diameter by 60-Teeth by 5/8-Inch Bore, Triple Chip Grind Carbide Tipped Saw Blade

A.G.E. Series MD10-601 Plywood/Laminate 10-Inch Diameter by 60-Teeth by 5/8-Inch Bore, Triple Chip Grind Carbide Tipped Saw Blade - Carbide tipped, industrial quality. 10-inch diameter, 60-teeth. 12-degree hook angle, 5/8-inch bore, tc grind. 126-inch kerf, 087-inch plate. Designed for clean cuts in plywood and single-sided laminates.

 

Proxxon 28732 3-964-Inch 80mm Carbide Tipped Saw Blade 36-Teeth

Proxxon 28732 3-9/64-Inch 80mm Carbide Tipped Saw Blade 36-Teeth

Proxxon 28732 3-9/64-Inch 80mm Carbide Tipped Saw Blade 36-Teeth - 28 inches. 14″ h x 0. 39″ h x 7. Dimensions overall length, end to end -7. 39 inches. Product type -circular. 14″ d, 0. -Use for balsa, plywood, hard and soft woods, polycarbonate, plastic, aluminum and pc boards. Overall height, top to bottom -0. Generic dimensions -blade dimensions 3. 2 pounds. -36 teeth. 28″ w x 3. 2 lbs. 39″ d. 23″ w x 0. 28732 features -carbide tipped saw blade. Overall product weight -0. -Overall dimensions 0.

 

Timberline 12060 Ti-Cut General Purpose and Finishing 12-Inch Diameter by 60-Teeth by 1-Inch Bore ATB Grind Thin Kerf Carbide Tipped Saw Blade

Timberline 12060 Ti-Cut General Purpose and Finishing 12-Inch Diameter by 60-Teeth by 1-Inch Bore, ATB Grind Thin Kerf Carbide Tipped Saw Blade

Timberline 12060 Ti-Cut General Purpose and Finishing 12-Inch Diameter by 60-Teeth by 1-Inch Bore, ATB Grind Thin Kerf Carbide Tipped Saw Blade - Carbide tipped, professional quality. 12-inch dia, 60-teeth. Designed to cut softwood, hardwood & plywood. Thin kerf. 10-degree hook angle, 1-inch bore, atb grind.

 

Tenryu PT-20360 8 Carbide Tipped Saw Blade  60 Tooth ATAF Grind - 58 Arbor - 0087 Kerf

Tenryu PT-20360 8″ Carbide Tipped Saw Blade ( 60 Tooth ATAF Grind – 5/8″ Arbor – 0.087 Kerf)

Tenryu PT-20360 8″ Carbide Tipped Saw Blade ( 60 Tooth ATAF Grind – 5/8″ Arbor – 0.087 Kerf) - Cost per cut compare to abrasives is less. Cold cutting. Ferrous metal and cement.

 

Makita A-91039 12-Inch 76-Teeth Stainless Steel Carbide-Tipped Saw Blade

Makita A-91039 12-Inch 76-Teeth Stainless Steel Carbide-Tipped Saw Blade

Makita A-91039 12-Inch 76-Teeth Stainless Steel Carbide-Tipped Saw Blade - 1-inch arbor. 12-inch by76t. Stainless steel.

 

Floor KingTM 33818 Carbide Tipped Saw Blade Comparable to Crain 787

Floor KingTM 33818 Carbide Tipped Saw Blade Comparable to Crain 787

Floor KingTM 33818 Carbide Tipped Saw Blade Comparable to Crain 787 - These blades fit the following crain® toe-kick saws #785 & #795. Lightweight saw blade with 18 carbide teeth for smooth cutting action with superb handling. Use in tricky spots such as cutting flooring flush with wall and cabinet bases.

 

Makita A-94904 Tungsten Carbide Tipped Saw Blade 5-38-Inch 16Tooth

Makita A-94904 Tungsten Carbide Tipped Saw Blade 5-3/8-Inch 16Tooth

Makita A-94904 Tungsten Carbide Tipped Saw Blade 5-3/8-Inch 16Tooth - Makita a-94904 specifications diameter 5-3/8″ arbor 5/8″ teeth 16makita a-94904 features ideal for general purpose cuts the thin kerf design works well for a lighter cutting load and aids in the elimination of wasted material the precision-ground teeth enable a clean cutting surface and promote a longer blade life applications general purpose, trim cutting, wood cutting, fiber cement cutting.

 

Milwaukee 48-40-4505 14-Inch 72 Tooth ATB Dry Cut Carbide Tipped Saw Blade with 1-Inch Arbor for Blade Right Saws

Milwaukee 48-40-4505 14-Inch 72 Tooth ATB Dry Cut Carbide Tipped Saw Blade with 1-Inch Arbor for Blade Right Saws

Milwaukee 48-40-4505 14-Inch 72 Tooth ATB Dry Cut Carbide Tipped Saw Blade with 1-Inch Arbor for Blade Right Saws - The product is durable. Hardened-steel body. 14-inch diameter limited manufacturer warranty. Vibration dampening. The product is manufactured in japan. Circular saw blade for cutting of ferrous materials. Carbide-tipped for longer life. The product is easy to use.

 

Makita T-01410 40T Fine Crosscutting Carbide-Tipped Saw Blade 6-12

Makita T-01410 40T Fine Crosscutting Carbide-Tipped Saw Blade, 6-1/2″

Makita T-01410 40T Fine Crosscutting Carbide-Tipped Saw Blade, 6-1/2″ - Fully hardened and expertly hand-tensioned steel saw plates for true cuts. Ultra-thin kerf carbide-tipped design provides smoother cuts with less drag on the motor and minimal material loss. Specially designed for cordless saws to permit more cuts per charge. Carbide tooth construction for clean cuts and long life. For use with 6-1/2″ cordless circular saws with 5/8″ arbor.

 

Freud LM74R014 14-Inch Diameter by 44T TCG Glue Line Ripping Carbide-Tipped Saw Blade with 1-Inch Arbor and 0138 Kerf

Freud LM74R014 14-Inch Diameter by 44T TCG Glue Line Ripping Carbide-Tipped Saw Blade with 1-Inch Arbor and 0.138 Kerf

Freud LM74R014 14-Inch Diameter by 44T TCG Glue Line Ripping Carbide-Tipped Saw Blade with 1-Inch Arbor and 0.138 Kerf - The ideal working range is from 1/8″ to 1″ thick. With this ultimate ripping blade, there is no need for stabilizers. There is no need for sanding or jointing after the cut. This blade also features laser cut anti-vibration slots, practically eliminating the vibration that resonates in standard blades. Application heavy duty glue line ripping blades for superior finish.

 

Hitachi 7-14 Carbide Tipped Saw Blade 18 Teeth 58 Arbor Thin Kerf

Hitachi 7-1/4″ Carbide Tipped Saw Blade 18 Teeth 5/8″ Arbor Thin Kerf

Hitachi 7-1/4″ Carbide Tipped Saw Blade 18 Teeth 5/8″ Arbor Thin Kerf - For hitachi makita bosch and other brands circcular saws. Grind atb, alternate top bevel kerf 106″ hook 18 degree carbide grade c2. Made in japan carbide alloy is composed of cobalt and tungsten gives saw blades longer lasting tips. Square top toth configuration for wood. Thiple chip grind and alternative top bevel.

 

AGE Series by Amana Tool MD7400 Fine FramingDecking 7-14-Inch Dia x 40-Teeth x 58-Inch Bore ATB-FT Grind Carbide Tipped Saw Blade

A.G.E. Series by Amana Tool MD7400 Fine Framing/Decking 7-1/4-Inch Dia x 40-Teeth x 5/8-Inch Bore, ATB-FT Grind, Carbide Tipped Saw Blade

A.G.E. Series by Amana Tool MD7400 Fine Framing/Decking 7-1/4-Inch Dia x 40-Teeth x 5/8-Inch Bore, ATB-FT Grind, Carbide Tipped Saw Blade - Carbide tipped, industrial quality saw blades for fine framing/decking and
composite materials (trex®). 20-degree hook angle, 5/8-inch bore with diamond knockout, atb-ft grind. 070-inch kerf, 047-inch plate. One of the most aggressive framing blades on the market. 7-1/4-inch diameter, 40-teeth.

 

Timberline 10040-30 Ti-Cut General Purpose and Finishing 10-Inch Diameter by 40-Teeth by 30mm Bore ATB Grind Thin Kerf Carbide Tipped Saw Blade

Timberline 10040-30 Ti-Cut General Purpose and Finishing 10-Inch Diameter by 40-Teeth by 30mm Bore, ATB Grind Thin Kerf Carbide Tipped Saw Blade

Timberline 10040-30 Ti-Cut General Purpose and Finishing 10-Inch Diameter by 40-Teeth by 30mm Bore, ATB Grind Thin Kerf Carbide Tipped Saw Blade - 18-degree hook angle, 30mm bore, atb grind. Carbide tipped, professional quality. Designed to cut softwood, hardwood & plywood. 10-inch dia, 40-teeth. Thin kerf.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.