Top 15 Socket Weld Flanges for 2020

 

Socket Weld Flange  A105  Raised Face  300  SCH XH  NOM 075 #ad

Socket Weld Flange | A105 | Raised Face | 300# | SCH: XH | NOM: 0.75″

Socket Weld Flange | A105 | Raised Face | 300# | SCH: XH | NOM: 0.75″ #ad - Product features socket weld flanges were initially developed for use on small-size high pressure piping. But before welding, a space must be created between flange and the end pipe. 6 mm) away from contact between the end of the pipe and the shoulder of the socket. Asme b31. 3 preparation for welding (e) socket weld assembly says in assembly of the joint before welding, the pipe or tube shall be inserted into the socket to the maximum depth and then withdrawn approximately 1/16″ (1. The disadvantage of this flange is due to this gap. The image shows you the x measure for the expansion gap. 1 1998 127. Their static strength is equal to slip on flanges, but their fatigue strength 50% greater than slip on flanges. Material a105, the standard forged carbon steel piping components for ambient and high temperature / pressure systems. In piping system using mainly stainless steel pipe and corrosive products, the crack between pipe and flange can give corrosion problems. The purpose for this bottoming clearance in a socket weld is to reduce the residual stress at the root of the weld that could occur during solidification of the weld metal. The connection with the pipe is done with one fillet weld at the outside of the flange.

 

Socket Weld Flange  A105  Raised Face  150  SCH XH  NOM 12 #ad

Socket Weld Flange | A105 | Raised Face | 150# | SCH: XH | NOM: 12″

Socket Weld Flange | A105 | Raised Face | 150# | SCH: XH | NOM: 12″ #ad - 3 preparation for welding (e) socket weld assembly says in assembly of the joint before welding, the pipe or tube shall be inserted into the socket to the maximum depth and then withdrawn approximately 1/16″ (1. But before welding, a space must be created between flange and the end pipe. The connection with the pipe is done with one fillet weld at the outside of the flange. Asme b31. Product features socket weld flanges were initially developed for use on small-size high pressure piping. Material a105, the standard forged carbon steel piping components for ambient and high temperature / pressure systems. In piping system using mainly stainless steel pipe and corrosive products, the crack between pipe and flange can give corrosion problems. The image shows you the x measure for the expansion gap. Their static strength is equal to slip on flanges, but their fatigue strength 50% greater than slip on flanges. 6 mm) away from contact between the end of the pipe and the shoulder of the socket. The disadvantage of this flange is due to this gap. The purpose for this bottoming clearance in a socket weld is to reduce the residual stress at the root of the weld that could occur during solidification of the weld metal. 1 1998 127.

 

Socket Weld Flange  A105  Raised Face  150  SCH XH  NOM 15 #ad

Socket Weld Flange | A105 | Raised Face | 150# | SCH: XH | NOM: 1.5″

Socket Weld Flange | A105 | Raised Face | 150# | SCH: XH | NOM: 1.5″ #ad - The disadvantage of this flange is due to this gap. Material a105, the standard forged carbon steel piping components for ambient and high temperature / pressure systems. Their static strength is equal to slip on flanges, but their fatigue strength 50% greater than slip on flanges. The connection with the pipe is done with one fillet weld at the outside of the flange. In piping system using mainly stainless steel pipe and corrosive products, the crack between pipe and flange can give corrosion problems. The image shows you the x measure for the expansion gap. 6 mm) away from contact between the end of the pipe and the shoulder of the socket. Product features socket weld flanges were initially developed for use on small-size high pressure piping. 3 preparation for welding (e) socket weld assembly says in assembly of the joint before welding, the pipe or tube shall be inserted into the socket to the maximum depth and then withdrawn approximately 1/16″ (1. The purpose for this bottoming clearance in a socket weld is to reduce the residual stress at the root of the weld that could occur during solidification of the weld metal. But before welding, a space must be created between flange and the end pipe. 1 1998 127. Asme b31.

 

Socket Weld Flange  A105  Raised Face  300  SCH XH  NOM 4 #ad

Socket Weld Flange | A105 | Raised Face | 300# | SCH: XH | NOM: 4″

Socket Weld Flange | A105 | Raised Face | 300# | SCH: XH | NOM: 4″ #ad - The image shows you the x measure for the expansion gap. Asme b31. Their static strength is equal to slip on flanges, but their fatigue strength 50% greater than slip on flanges. 1 1998 127. Product features socket weld flanges were initially developed for use on small-size high pressure piping. 3 preparation for welding (e) socket weld assembly says in assembly of the joint before welding, the pipe or tube shall be inserted into the socket to the maximum depth and then withdrawn approximately 1/16″ (1. But before welding, a space must be created between flange and the end pipe. The purpose for this bottoming clearance in a socket weld is to reduce the residual stress at the root of the weld that could occur during solidification of the weld metal. The disadvantage of this flange is due to this gap. Material a105, the standard forged carbon steel piping components for ambient and high temperature / pressure systems. In piping system using mainly stainless steel pipe and corrosive products, the crack between pipe and flange can give corrosion problems. The connection with the pipe is done with one fillet weld at the outside of the flange. 6 mm) away from contact between the end of the pipe and the shoulder of the socket.

 

Socket Weld Flange  A105  Raised Face  600  SCH STD  NOM 4 #ad

Socket Weld Flange | A105 | Raised Face | 600# | SCH: STD | NOM: 4″

Socket Weld Flange | A105 | Raised Face | 600# | SCH: STD | NOM: 4″ #ad - The connection with the pipe is done with one fillet weld at the outside of the flange. Material a105, the standard forged carbon steel piping components for ambient and high temperature / pressure systems. But before welding, a space must be created between flange and the end pipe. The purpose for this bottoming clearance in a socket weld is to reduce the residual stress at the root of the weld that could occur during solidification of the weld metal. The image shows you the x measure for the expansion gap. 6 mm) away from contact between the end of the pipe and the shoulder of the socket. 1 1998 127. Product features socket weld flanges were initially developed for use on small-size high pressure piping. Their static strength is equal to slip on flanges, but their fatigue strength 50% greater than slip on flanges. Asme b31. The disadvantage of this flange is due to this gap. 3 preparation for welding (e) socket weld assembly says in assembly of the joint before welding, the pipe or tube shall be inserted into the socket to the maximum depth and then withdrawn approximately 1/16″ (1. In piping system using mainly stainless steel pipe and corrosive products, the crack between pipe and flange can give corrosion problems.

 

Socket Weld Flange  A105  Raised Face  600  SCH XH  NOM 1 #ad

Socket Weld Flange | A105 | Raised Face | 600# | SCH: XH | NOM: 1″

Socket Weld Flange | A105 | Raised Face | 600# | SCH: XH | NOM: 1″ #ad - 3 preparation for welding (e) socket weld assembly says in assembly of the joint before welding, the pipe or tube shall be inserted into the socket to the maximum depth and then withdrawn approximately 1/16″ (1. The purpose for this bottoming clearance in a socket weld is to reduce the residual stress at the root of the weld that could occur during solidification of the weld metal. 6 mm) away from contact between the end of the pipe and the shoulder of the socket. 1 1998 127. The connection with the pipe is done with one fillet weld at the outside of the flange. The image shows you the x measure for the expansion gap. But before welding, a space must be created between flange and the end pipe. Product features socket weld flanges were initially developed for use on small-size high pressure piping. In piping system using mainly stainless steel pipe and corrosive products, the crack between pipe and flange can give corrosion problems. Their static strength is equal to slip on flanges, but their fatigue strength 50% greater than slip on flanges. Asme b31. The disadvantage of this flange is due to this gap. Material a105, the standard forged carbon steel piping components for ambient and high temperature / pressure systems.

 

Socket Weld Flange  A105  Raised Face  600  SCH XH  NOM 125 #ad

Socket Weld Flange | A105 | Raised Face | 600# | SCH: XH | NOM: 1.25″

Socket Weld Flange | A105 | Raised Face | 600# | SCH: XH | NOM: 1.25″ #ad - In piping system using mainly stainless steel pipe and corrosive products, the crack between pipe and flange can give corrosion problems. Product features socket weld flanges were initially developed for use on small-size high pressure piping. The connection with the pipe is done with one fillet weld at the outside of the flange. The disadvantage of this flange is due to this gap. 3 preparation for welding (e) socket weld assembly says in assembly of the joint before welding, the pipe or tube shall be inserted into the socket to the maximum depth and then withdrawn approximately 1/16″ (1. 6 mm) away from contact between the end of the pipe and the shoulder of the socket. Material a105, the standard forged carbon steel piping components for ambient and high temperature / pressure systems. 1 1998 127. The image shows you the x measure for the expansion gap. Asme b31. But before welding, a space must be created between flange and the end pipe. The purpose for this bottoming clearance in a socket weld is to reduce the residual stress at the root of the weld that could occur during solidification of the weld metal. Their static strength is equal to slip on flanges, but their fatigue strength 50% greater than slip on flanges.

 

Socket Weld Flange  A105  Raised Face  600  SCH STD  NOM 05 #ad

Socket Weld Flange | A105 | Raised Face | 600# | SCH: STD | NOM: 0.5″

Socket Weld Flange | A105 | Raised Face | 600# | SCH: STD | NOM: 0.5″ #ad - The purpose for this bottoming clearance in a socket weld is to reduce the residual stress at the root of the weld that could occur during solidification of the weld metal. In piping system using mainly stainless steel pipe and corrosive products, the crack between pipe and flange can give corrosion problems. Asme b31. But before welding, a space must be created between flange and the end pipe. 1 1998 127. The disadvantage of this flange is due to this gap. Their static strength is equal to slip on flanges, but their fatigue strength 50% greater than slip on flanges. 3 preparation for welding (e) socket weld assembly says in assembly of the joint before welding, the pipe or tube shall be inserted into the socket to the maximum depth and then withdrawn approximately 1/16″ (1. 6 mm) away from contact between the end of the pipe and the shoulder of the socket. Product features socket weld flanges were initially developed for use on small-size high pressure piping. Material a105, the standard forged carbon steel piping components for ambient and high temperature / pressure systems. The connection with the pipe is done with one fillet weld at the outside of the flange. The image shows you the x measure for the expansion gap.

 

Socket Weld Flange  A105  Raised Face  150  SCH XH  NOM 8 #ad

Socket Weld Flange | A105 | Raised Face | 150# | SCH: XH | NOM: 8″

Socket Weld Flange | A105 | Raised Face | 150# | SCH: XH | NOM: 8″ #ad - 1 1998 127. Their static strength is equal to slip on flanges, but their fatigue strength 50% greater than slip on flanges. Product features socket weld flanges were initially developed for use on small-size high pressure piping. Material a105, the standard forged carbon steel piping components for ambient and high temperature / pressure systems. 3 preparation for welding (e) socket weld assembly says in assembly of the joint before welding, the pipe or tube shall be inserted into the socket to the maximum depth and then withdrawn approximately 1/16″ (1. 6 mm) away from contact between the end of the pipe and the shoulder of the socket. But before welding, a space must be created between flange and the end pipe. The connection with the pipe is done with one fillet weld at the outside of the flange. The image shows you the x measure for the expansion gap. Asme b31. The disadvantage of this flange is due to this gap. In piping system using mainly stainless steel pipe and corrosive products, the crack between pipe and flange can give corrosion problems. The purpose for this bottoming clearance in a socket weld is to reduce the residual stress at the root of the weld that could occur during solidification of the weld metal.

 

Socket Weld Flange  A105  Raised Face  600  SCH XH  NOM 15 #ad

Socket Weld Flange | A105 | Raised Face | 600# | SCH: XH | NOM: 1.5″

Socket Weld Flange | A105 | Raised Face | 600# | SCH: XH | NOM: 1.5″ #ad - 6 mm) away from contact between the end of the pipe and the shoulder of the socket. Their static strength is equal to slip on flanges, but their fatigue strength 50% greater than slip on flanges. 1 1998 127. The disadvantage of this flange is due to this gap. The image shows you the x measure for the expansion gap. The purpose for this bottoming clearance in a socket weld is to reduce the residual stress at the root of the weld that could occur during solidification of the weld metal. But before welding, a space must be created between flange and the end pipe. In piping system using mainly stainless steel pipe and corrosive products, the crack between pipe and flange can give corrosion problems. Product features socket weld flanges were initially developed for use on small-size high pressure piping. 3 preparation for welding (e) socket weld assembly says in assembly of the joint before welding, the pipe or tube shall be inserted into the socket to the maximum depth and then withdrawn approximately 1/16″ (1. Asme b31. Material a105, the standard forged carbon steel piping components for ambient and high temperature / pressure systems. The connection with the pipe is done with one fillet weld at the outside of the flange.

 

Socket Weld Flange  A105  Raised Face  150  SCH XH  NOM 125 #ad

Socket Weld Flange | A105 | Raised Face | 150# | SCH: XH | NOM: 1.25″

Socket Weld Flange | A105 | Raised Face | 150# | SCH: XH | NOM: 1.25″ #ad - In piping system using mainly stainless steel pipe and corrosive products, the crack between pipe and flange can give corrosion problems. The disadvantage of this flange is due to this gap. Product features socket weld flanges were initially developed for use on small-size high pressure piping. Material a105, the standard forged carbon steel piping components for ambient and high temperature / pressure systems. 6 mm) away from contact between the end of the pipe and the shoulder of the socket. But before welding, a space must be created between flange and the end pipe. The purpose for this bottoming clearance in a socket weld is to reduce the residual stress at the root of the weld that could occur during solidification of the weld metal. The image shows you the x measure for the expansion gap. Asme b31. 1 1998 127. The connection with the pipe is done with one fillet weld at the outside of the flange. Their static strength is equal to slip on flanges, but their fatigue strength 50% greater than slip on flanges. 3 preparation for welding (e) socket weld assembly says in assembly of the joint before welding, the pipe or tube shall be inserted into the socket to the maximum depth and then withdrawn approximately 1/16″ (1.

 

Socket Weld Flange  A105  Raised Face  150  SCH XH  NOM 4 #ad

Socket Weld Flange | A105 | Raised Face | 150# | SCH: XH | NOM: 4″

Socket Weld Flange | A105 | Raised Face | 150# | SCH: XH | NOM: 4″ #ad - The connection with the pipe is done with one fillet weld at the outside of the flange. Material a105, the standard forged carbon steel piping components for ambient and high temperature / pressure systems. 6 mm) away from contact between the end of the pipe and the shoulder of the socket. But before welding, a space must be created between flange and the end pipe. 3 preparation for welding (e) socket weld assembly says in assembly of the joint before welding, the pipe or tube shall be inserted into the socket to the maximum depth and then withdrawn approximately 1/16″ (1. 1 1998 127. The purpose for this bottoming clearance in a socket weld is to reduce the residual stress at the root of the weld that could occur during solidification of the weld metal. In piping system using mainly stainless steel pipe and corrosive products, the crack between pipe and flange can give corrosion problems. The image shows you the x measure for the expansion gap. Product features socket weld flanges were initially developed for use on small-size high pressure piping. Their static strength is equal to slip on flanges, but their fatigue strength 50% greater than slip on flanges. The disadvantage of this flange is due to this gap. Asme b31.

 

Socket Weld Flange  A105  Raised Face  150  SCH STD  NOM 8 #ad

Socket Weld Flange | A105 | Raised Face | 150# | SCH: STD | NOM: 8″

Socket Weld Flange | A105 | Raised Face | 150# | SCH: STD | NOM: 8″ #ad - In piping system using mainly stainless steel pipe and corrosive products, the crack between pipe and flange can give corrosion problems. The purpose for this bottoming clearance in a socket weld is to reduce the residual stress at the root of the weld that could occur during solidification of the weld metal. The connection with the pipe is done with one fillet weld at the outside of the flange. But before welding, a space must be created between flange and the end pipe. Material a105, the standard forged carbon steel piping components for ambient and high temperature / pressure systems. 6 mm) away from contact between the end of the pipe and the shoulder of the socket. Product features socket weld flanges were initially developed for use on small-size high pressure piping. The disadvantage of this flange is due to this gap. 1 1998 127. Asme b31. Their static strength is equal to slip on flanges, but their fatigue strength 50% greater than slip on flanges. 3 preparation for welding (e) socket weld assembly says in assembly of the joint before welding, the pipe or tube shall be inserted into the socket to the maximum depth and then withdrawn approximately 1/16″ (1. The image shows you the x measure for the expansion gap.

 

Socket Weld Flange  A105  Raised Face  600  SCH XH  NOM 075 #ad

Socket Weld Flange | A105 | Raised Face | 600# | SCH: XH | NOM: 0.75″

Socket Weld Flange | A105 | Raised Face | 600# | SCH: XH | NOM: 0.75″ #ad - 6 mm) away from contact between the end of the pipe and the shoulder of the socket. Product features socket weld flanges were initially developed for use on small-size high pressure piping. 1 1998 127. Asme b31. The connection with the pipe is done with one fillet weld at the outside of the flange. Their static strength is equal to slip on flanges, but their fatigue strength 50% greater than slip on flanges. The image shows you the x measure for the expansion gap. But before welding, a space must be created between flange and the end pipe. The disadvantage of this flange is due to this gap. The purpose for this bottoming clearance in a socket weld is to reduce the residual stress at the root of the weld that could occur during solidification of the weld metal. 3 preparation for welding (e) socket weld assembly says in assembly of the joint before welding, the pipe or tube shall be inserted into the socket to the maximum depth and then withdrawn approximately 1/16″ (1. In piping system using mainly stainless steel pipe and corrosive products, the crack between pipe and flange can give corrosion problems. Material a105, the standard forged carbon steel piping components for ambient and high temperature / pressure systems.

 

Socket Weld Flange  A105  Raised Face  600  SCH XH  NOM 2 #ad

Socket Weld Flange | A105 | Raised Face | 600# | SCH: XH | NOM: 2″

Socket Weld Flange | A105 | Raised Face | 600# | SCH: XH | NOM: 2″ #ad - 1 1998 127. The image shows you the x measure for the expansion gap. Asme b31. In piping system using mainly stainless steel pipe and corrosive products, the crack between pipe and flange can give corrosion problems. Material a105, the standard forged carbon steel piping components for ambient and high temperature / pressure systems. Their static strength is equal to slip on flanges, but their fatigue strength 50% greater than slip on flanges. 6 mm) away from contact between the end of the pipe and the shoulder of the socket. 3 preparation for welding (e) socket weld assembly says in assembly of the joint before welding, the pipe or tube shall be inserted into the socket to the maximum depth and then withdrawn approximately 1/16″ (1. The connection with the pipe is done with one fillet weld at the outside of the flange. The disadvantage of this flange is due to this gap. But before welding, a space must be created between flange and the end pipe. Product features socket weld flanges were initially developed for use on small-size high pressure piping. The purpose for this bottoming clearance in a socket weld is to reduce the residual stress at the root of the weld that could occur during solidification of the weld metal.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.