Top 17 Best Robert Sorbies in 2019

 

Robert Sorby Proedge Trizact Belt 3000 Grit #ad

Robert Sorby Proedge Trizact Belt 3000 Grit

Robert Sorby Proedge Trizact Belt 3000 Grit #ad - A cool running trizact abrasive belt for sorby’s proedge sharpening system. Puts a keen edge on tools while avoiding overheating. Works best for superfine finishing of knives and other fine edge tools. One belt per pack. This unique abrasive has engineered pyrimidal shaped particles that cut consistently and last for a long time. England.

 

Robert Sorby 890H20 Pair of Thread Cutters - 20TPI #ad

Robert Sorby #890H/20 Pair of Thread Cutters – 20TPI

Robert Sorby #890H/20 Pair of Thread Cutters – 20TPI #ad - Made in england. The tools have a unique enhanced helix angle design specifically for use in wood, so you can be assured of smooth and precise results. Hss blades. The optional relief tool (#19072) and tool support (#19074) are highly recommended accessories to help ensure the cutting of ideally formed threads. The thread cutters come as a pair that will cut both the male and female threads. Detailed instructions are included with the thread cutters. Used to make lidded boxes and other threaded turnings, sorby’s threading tools bring a tremendously fascinating feature to projects. Ash handles.

 

Robert Sorby RSTM-HCT123 TurnMaster Handled with Round Detail Point Square Tungsten Carbide Cutters #ad

Robert Sorby RSTM-HCT123 TurnMaster Handled with Round, Detail Point, & Square Tungsten Carbide Cutters

Robert Sorby RSTM-HCT123 TurnMaster Handled with Round, Detail Point, & Square Tungsten Carbide Cutters #ad - The robert sorby turnmaster is the first wood turning tool in the world to combine three cutting edge technologies in one amazingly versatile tool. It’s collection of available parts and cutters make it the most flexible and value added single turning tool on the market today. Choose high speed steel for clean detail and fine finishing. The turnmaster will accept any of 3 standard cutters (square, round, or detail), as well as a wide range of other cutting tips which have been specially configured to work with it. Choose super tough tungsten carbide for roughing operations or for abrasive materials such as high silica exotic woods. Will also accept any of sorby’s other turnmaster cutting tips. . This lets turners select just the right cutter for the materials being turned. Specifications the rstm-htc123 comes with one each of the round, detail point, and square tungsten carbide cutters. Also includes a cutter release key, torx wrenches, and an instruction sheet. It has a high tensile strength torx screw to keep cutters tight. Both the hss and tin cutters are re-sharpenable. The titanium nitride coated excelsior tips offer the same characteristics as plain hss, but with the added toughness (has an rc of 90) and prolonged edge life that tin provides. The round shank has a flat underside for stability on the rest. Cutters are available in 3 different materials, tungsten carbide (tc), high speed steel (hss), and the titanium nitride (tin) coated excelsior line. The handled version of sorby’s versatile turnmaster tool with all three (round, detail point, and square) of their primary tungsten carbide cutters (tcc). Tool has a 12″ long ash handle and is 20-5/8″ long overall. This allows for both scraping (for fast material removal) and shear scraping (for fine finishing and smoothing) options. It also includes a special key for quick cutter release. The turnmaster incorporates a patented interchangeable cutter head that locks into three positions.

 

12 Robert Sorby RCSTB250 Revolving Stebcentre 2 MT #ad

1/2″ Robert Sorby #RCSTB250 Revolving Stebcentre #2 MT

1/2″ Robert Sorby #RCSTB250 Revolving Stebcentre #2 MT #ad - Comes in diameters of 1/2″, 7/8″, and 1-1/4″. This offers many advantages. With a light setting this offers safety for the novice turner because the workpiece simply stops revolving should a dig-in occur, rather than causing kick back. In time critical production turning, the teeth can be backed off with the point still in place, so the workpeice can be stopped and checked without removing it from the lathe, and finished pieces and blanks can be exchanged by backing off the tail stock, rather than starting and stopping the lathe. Made in england. Size refers to drive face diameter. These revolutionary spur drives combine a spring loaded center point with a ring of razor sharp teeth. By winding in the tail stock the degree of “bite” can be varied while still keeping the center point firmly located. Inspired by norwegian master turner petter herud, this revolving (or live) version of the stebcentre allows the turner to experiment with off-center or eccentric turning.

 

316 Robert Sorby 831H Diamond Parting Tool #ad

3/16″ Robert Sorby #831H Diamond Parting Tool

3/16″ Robert Sorby #831H Diamond Parting Tool #ad - Ash handles offer firm hand control during use and brass ferrules prevent wood splitting from tool pressure. . Overall lengths 17″ to 21″. This hss 3/16″ diamond parting tool will keep a sharpened edge about six times longer than carbon steel and resist “blued” softening from overheating during grinding or from heavy turning.

 

116 Robert Sorby 830SH Slim Parting Tool #ad

1/16″ Robert Sorby #830SH Slim Parting Tool

1/16″ Robert Sorby #830SH Slim Parting Tool #ad - Made in england. The blade has a double bevel cutting face, and is seated and triple riveted into the ash handle. Its 1-1/4″ blade width eliminates the flexing and twisting normally associated with thin blades. This 1/16 thick hss parting tool is designed to give the cleanest and finest of cuts with the minimum of waste. Overall length is approximately 10-1/2″.

 

Robert Sorby 370A Micro Spiraling System Complete #ad

Robert Sorby #370/A Micro Spiraling System Complete

Robert Sorby #370/A Micro Spiraling System Complete #ad - Note for sorby’s micro system only. A high quality fine steel tool cutter for sorby’s micro spiralling system. Will not fit full size set. Made in england.

 

Robert Sorby 895H Relief Cutting Tool #ad

Robert Sorby #895H Relief Cutting Tool

Robert Sorby #895H Relief Cutting Tool #ad - Hss blade with ash handle. This rabbet assures that the threads stop before running into and marring the container. It cuts the rabbet (relief cut) prior to cutting threads. Made in england. The relief tool is used in conjunction with sorby’s thread cutting tools (10, 16, and 20 tpi).

 

1 Robert Sorby 820H Round Nose Scraper #ad

1″ Robert Sorby #820H Round Nose Scraper

1″ Robert Sorby #820H Round Nose Scraper #ad - High speed steel (hss) blade is 1/4″ thick. Made in england. Scraper has 12″ ash handle with an overall length of approximately 18-1/2″. Generally used for coves in spindle work, hollowing end grain, and on bowls and platters for creating smooth, flowing curves.

 

116 Robert Sorby 870H Micro Fluted Parting Tool #ad

1/16″ Robert Sorby #870H Micro Fluted Parting Tool

1/16″ Robert Sorby #870H Micro Fluted Parting Tool #ad - High speed steel (hss) blade. Fluted parting tool has a 6-1/4″ ash handle and is 10″ long overall. It has a flute running along the bottom edge that creates 2 sharp spurs at the cutting face. Made in england. A very fine parting tool sized for the delicacy and control required for smaller projects and fine detail work. The spurs sever wood fibers to produce a burnished finish. The part is nearly seamless in appearance, which is especially helpful where matching of grain is desired.

 

5pc Robert Sorby 570 Sheaf River Butt Chisel Set #ad

5pc. Robert Sorby #570 Sheaf River Butt Chisel Set

5pc. Robert Sorby #570 Sheaf River Butt Chisel Set #ad - Butt chisels are significantly less awkward to use. Especially good for paring, joint fitting, and other fine detail work. Much shorter than standard bench chisels. Made in england. Their compact size will help you achieve a much higher level of control.

 

Robert Sorby 472 Cutting Tip Holder #ad

Robert Sorby #472 Cutting Tip Holder

Robert Sorby #472 Cutting Tip Holder #ad - It is double ended to allow you to hold comfortably almost every sorby tool tip without fear of catching the cutting tip or, even more importantly, your finger, in a sharpening belt or grinding wheel. An inexpensive yet indispensible little sharpening accessory. Made in england.

 

7 Robert Sorby 977 Double Ended Calipers #ad

7″ Robert Sorby #977 Double Ended Calipers

7″ Robert Sorby #977 Double Ended Calipers #ad - The calipers are made from plated steel for corrosion resistance and have a friction fit adjustment point. The increased throat depth of this 7″ version allows them to be used on larger diameter vessels that have restricted openings. An indispensable addition to the turner’s tool kit, double-ended calipers are ideal for both measuring vessel wall thicknesses and checking turning diameters. The mirror image design of the caliper automatically transfers the measurement taken at one end to the opposite end so that you can take an accurate reading without removing the caliper from the work. Using calipers while turning will increase the accuracy of measurement readings and transfers and speed the turning process. Made in england.

 

Robert Sorby H6542 Turning Tool Set 8 Piece #ad

Robert Sorby H6542 Turning Tool Set (8 Piece)

Robert Sorby H6542 Turning Tool Set (8 Piece) #ad - Hss turning tool set includes 3/4″ roughing gouge, 1/4″ and 1/2″ spindle gouge, 3/8″ bowl gouge, 3/4″ standard skew, 3/16″ diamond side cut scraper, 1″ square scraper, and 1/2″ round scraper. This 8-pc. Overall lengths are 16″ to 19″.

 

2 - 240 Grit 10 pk Robert Sorby 412A Sandmaster #ad

2″ – 240 Grit (10 pk.) Robert Sorby #412A Sandmaster

2″ – 240 Grit (10 pk.) Robert Sorby #412A Sandmaster #ad - Made in england. Come in packs of 10. High quality 2″ diameter x 240 grit hook & loop abrasives for the sorby sandmaster.

 

Robert Sorby RSTM-HT123 TurnMaster Handled with Round Detail Point Square HSS Cutters #ad

Robert Sorby RSTM-HT123 TurnMaster Handled with Round, Detail Point, & Square HSS Cutters

Robert Sorby RSTM-HT123 TurnMaster Handled with Round, Detail Point, & Square HSS Cutters #ad - The robert sorby turnmaster is the first wood turning tool in the world to combine three cutting edge technologies in one amazingly versatile tool. The titanium nitride coated excelsior tips offer the same characteristics as plain hss, but with the added toughness (has an rc of 90) and prolonged edge life that tin provides. Tool has a 12″ long ash handle and is 20-5/8″ long overall. The turnmaster will accept any of 3 standard cutters (square, round, or detail), as well as a wide range of other cutting tips which have been specially configured to work with it. Also includes a cutter release key, torx wrenches, and an instruction sheet. Cutters are available in 3 different materials, tungsten carbide (tc), high speed steel (hss), and the titanium nitride (tin) coated excelsior line. Choose high speed steel for clean detail and fine finishing. It has a high tensile strength torx screw to keep cutters tight. Specifications the rstm-ht123 comes with one each of the round, detail point, and square high speed steel cutters. It also includes a special key for quick cutter release. The handled version of sorby’s versatile turnmaster tool with all three (round, detail point, and square) of their primary high speed steel cutters (hss). The round shank has a flat underside for stability on the rest. Will also accept any of sorby’s other turnmaster cutting tips. This lets turners select just the right cutter for the materials being turned. Choose super tough tungsten carbide for roughing operations or for abrasive materials such as high silica exotic woods. Both the hss and tin cutters are re-sharpenable. The turnmaster incorporates a patented interchangeable cutter head that locks into three positions. It’s collection of available parts and cutters make it the most flexible and value added single turning tool on the market today. This allows for both scraping (for fast material removal) and shear scraping (for fine finishing and smoothing) options.

 

12 Robert Sorby 842XLH Bowl Gouge #ad

1/2″ Robert Sorby #842XLH Bowl Gouge

1/2″ Robert Sorby #842XLH Bowl Gouge #ad - Sharpening surface can be easily tilted back at any angle. Includes skew chisel jig, standard gouge jig, fingernail profiler & sharpening belts. User can easily bypass the presets and set a custom angle. No complex assembly required. (1) proedge plus sharpening unit (ped01).





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.