Top 18 Best Shank Diameters

 

Eagle Tool US EA75054 Auger Style Flex Installer Bit for Wood 14 Shank Diameter 34 Head Diameter x 54 Length

Eagle Tool US EA75054 Auger Style Flex Installer Bit for Wood, 1/4″ Shank Diameter, 3/4″ Head Diameter x 54″ Length

Eagle Tool US EA75054 Auger Style Flex Installer Bit for Wood, 1/4″ Shank Diameter, 3/4″ Head Diameter x 54″ Length - Made in usa. Add a quick switch hex to adapt to a quick change chuck part number ethxkit250. Aggressive and self feeding auger point. Flexible spring steel shank with wire fishing accommodation holes in the head and shank. Three flat non-slip grip on the chuck end.

 

Wokesi 10Pcs38Cutting Diameter146mmShank DiameterSolid Tungsten Carbide File Cutter Taper Points Burrs Grinding Head Fit Dremel Bits Endmills for Rotary Tools 3810mm

Wokesi 10Pcs,3/8″Cutting Diameter,1/4″(6mm)Shank Diameter,Solid Tungsten Carbide File Cutter Taper Points Burrs Grinding Head Fit Dremel Bits Endmills for Rotary Tools (3/8”(10mm))

Wokesi 10Pcs,3/8″Cutting Diameter,1/4″(6mm)Shank Diameter,Solid Tungsten Carbide File Cutter Taper Points Burrs Grinding Head Fit Dremel Bits Endmills for Rotary Tools (3/8”(10mm)) - Package1 pack of 10 pieces. Used in the parts bevel edge,inverted round and trench processing,the clean-up casting. Suitable for process copper,aluminum,alloy,iron,marble,jade,steel,glass,wood and plaster etc,high performance. Materialsolid tungsten carbide,long tool lifegood concentricity and consistency at surface processing. Cutting diameter=3/8″(10mm),shank diameter=6mm(approx1/4”),oal=64mm.

 

Niagara Cutter N90284 High Speed Steel Square Nose End Mill Weldon Shank Uncoated Bright Finish Finishing Cutting 37-Degree 2-Flute 4125 OAL 0875 Cut Diameter 075 Shank Diameter

Niagara Cutter N90284 High Speed Steel Square Nose End Mill, Weldon Shank, Uncoated (Bright) Finish, Finishing Cutting, 37-Degree, 2-Flute, 4.125″ OAL, 0.875″ Cut Diameter, 0.75″ Shank Diameter

Niagara Cutter N90284 High Speed Steel Square Nose End Mill, Weldon Shank, Uncoated (Bright) Finish, Finishing Cutting, 37-Degree, 2-Flute, 4.125″ OAL, 0.875″ Cut Diameter, 0.75″ Shank Diameter - Two flutes offer better chip-carrying capacity than end mills with more flutes. Square end creates sharp, unrounded cuts. 37-degree helix angle provides efficient cutting action and chip evacuation required to machine aluminum and other nonferrous materials. Center-cutting design allows the end mill to plunge into material like a drill bit while also performing conventional surface milling. High-speed steel is a common general-purpose steel for cutting tools.

 

In-tool-home Abrasive Flap Wheel Sander 80 Grit 18 Shank Diameter 32mm 38 Thick and 1 Pack of 10

In-tool-home Abrasive Flap Wheel Sander 80 Grit 1/8″ Shank Diameter 32mm 3/8″ Thick and 1″ Pack of 10

In-tool-home Abrasive Flap Wheel Sander 80 Grit 1/8″ Shank Diameter 32mm 3/8″ Thick and 1″ Pack of 10 - Material emery cloth,metal,outer diameter 32mm and 20mm. Best as a finishing sander after heavier surface sanding and material removal is completed. Use for grinding and polishing flat or contoured surfaces. Great for removing rust. New abrasive is continuously exposed to prevent clogging and give a uniform finish.

 

Kodiak Cutting Tools KCT136464 USA Made Long Series Solid Premium Carbide End Mill 4 Flute 14 Shank Diameter 1-18 Length of Cut 3 Overall Length

Kodiak Cutting Tools KCT136464 USA Made Long Series Solid Premium Carbide End Mill, 4 Flute, 1/4″ Shank Diameter, 1-1/8″ Length of Cut, 3″ Overall Length

Kodiak Cutting Tools KCT136464 USA Made Long Series Solid Premium Carbide End Mill, 4 Flute, 1/4″ Shank Diameter, 1-1/8″ Length of Cut, 3″ Overall Length - 1/4″ shank diameter. 1-1/8″ flute length (length of cut), 30 degree helix. 3″ overall length center cutting carbide endmill. Premium sub-micrograin carbide end mill made in the usa. 4 flutes, single end.

 

Smoothing Pneumatic Air Hammer Bit 401 Shank Diameter 30mm Extended Length Hammer 100mm

Smoothing Pneumatic Air Hammer Bit 401 Shank Diameter 30mm Extended Length Hammer 100mm

Smoothing Pneumatic Air Hammer Bit 401 Shank Diameter 30mm Extended Length Hammer 100mm - Designed to fit all popular air hammers with a standard 401 shank. Diameter 30mm. Material 40cr. Length 100mm. Made from the best shock-resisting alloy steel available.

 

SE DHD11610 Grit 120 Diamond Coated HSS Drill Set with 116-Inch Shank Diameter 10 Piece

SE DHD11610 Grit 120 Diamond Coated HSS Drill Set with 1/16-Inch Shank Diameter, 10 Piece

SE DHD11610 Grit 120 Diamond Coated HSS Drill Set with 1/16-Inch Shank Diameter, 10 Piece - You will enjoy the quality, function and usefulness this 10pc diamond coated hss drill set has to offer. . Se is proud to present our 10pc diamond coated hss drill set, 1/16-inch shank diameter, grit 120. Features of our product include (1) shank diameter 1/16″ (2) overall length 1-5/8″ (3) diamond coated length 15-20mm (4) diamond grit 120 (5) comes in a convenient plastic storage container for easy storage and transportation please note for long lasting use please use a lubricant, such as water, when using all diamond coated tools. Se is committed to providing the customer with the best source for value possible on the market. Useful for drilling holes in glass, marble, tile and stone.

 

Niagara Cutter N86010 Carbide Square Nose End Mill Inch TiAlN Finish Roughing and Finishing Cut 30 Degree Helix 3 Flutes 25 Overall Length 0250 Cutting Diameter 0250 Shank Diameter

Niagara Cutter N86010 Carbide Square Nose End Mill, Inch, TiAlN Finish, Roughing and Finishing Cut, 30 Degree Helix, 3 Flutes, 2.5″ Overall Length, 0.250″ Cutting Diameter, 0.250″ Shank Diameter

Niagara Cutter N86010 Carbide Square Nose End Mill, Inch, TiAlN Finish, Roughing and Finishing Cut, 30 Degree Helix, 3 Flutes, 2.5″ Overall Length, 0.250″ Cutting Diameter, 0.250″ Shank Diameter - Center-cutting design allows the end mill to plunge into material like a drill bit while also performing conventional surface milling. Three flutes provide better chip-carrying capacity than four flutes and a finer finish than two, reducing the need for a second finishing cut in some applications. Square nose end mills (also called square end) create sharp, unrounded cuts. Titanium aluminum nitride (tialn) coating lubricates the end mill for high-temperature stability and abrasion resistance at high cutting speeds, offering better heat resistance than tin and ticn coatings. Carbide can run at higher speeds than high-speed steel, resisting abrasion and high cutting temperatures.

 

Niagara Cutter N35160 High Speed Steel Square Nose End Mill Weldon Shank TiN Finish RoughingFinishing Cut Non-Center 30-Degree 4-Flute 325 OAL 0500 Cut Diameter 05000 Shank Diameter

Niagara Cutter N35160 High Speed Steel Square Nose End Mill, Weldon Shank, TiN Finish, Roughing/Finishing Cut, Non-Center, 30-Degree, 4-Flute, 3.25″ OAL, 0.500″ Cut Diameter, 0.5000″ Shank Diameter

Niagara Cutter N35160 High Speed Steel Square Nose End Mill, Weldon Shank, TiN Finish, Roughing/Finishing Cut, Non-Center, 30-Degree, 4-Flute, 3.25″ OAL, 0.500″ Cut Diameter, 0.5000″ Shank Diameter - Number of flutes varies fewer flutes have more chip-carrying capacity and more flutes produce a finer finish. Square nose end mills (also called square end) create sharp, unrounded cuts. High-speed steel is compatible with a variety of materials. Center-cutting design allows the end mill to plunge into material like a drill bit while also performing conventional surface milling. Titanium nitride (tin) is a general-purpose coating that combines high-temperature resistance and increased hardness compared to uncoated end mills.

 

Eagle Tool US EA75072 Auger Style Flex Installer Bit for Wood 14 Shank Diameter 34 Head Diameter x 72 Length

Eagle Tool US EA75072 Auger Style Flex Installer Bit for Wood, 1/4″ Shank Diameter, 3/4″ Head Diameter x 72″ Length

Eagle Tool US EA75072 Auger Style Flex Installer Bit for Wood, 1/4″ Shank Diameter, 3/4″ Head Diameter x 72″ Length - Aggressive and self feeding auger point. Flexible spring steel shank with wire fishing accommodation holes in the head and shank. Three flat non-slip grip on the chuck end. Made in usa. Add a quick switch hex to adapt to a quick change chuck part number ethxkit250.

 

Eagle Tool US EA37554 Auger Style Flex Installer Bit for Wood 316 Shank Diameter 38 Head Diameter x 54 Length

Eagle Tool US EA37554 Auger Style Flex Installer Bit for Wood, 3/16″ Shank Diameter, 3/8″ Head Diameter x 54″ Length

Eagle Tool US EA37554 Auger Style Flex Installer Bit for Wood, 3/16″ Shank Diameter, 3/8″ Head Diameter x 54″ Length - Flexible spring steel shank with wire fishing accommodation holes in the head and shank. Made in usa. Aggressive and self feeding auger point. Three flat non-slip grip on the chuck end. Add a quick switch hex to adapt to a quick change chuck part number ethxkit187.

 

Niagara Cutter N55808 Carbide Square Nose End Mill Inch TiAlN Finish Roughing and Finishing Cut 30 Degree Helix 4 Flutes 4 Overall Length 0250 Cutting Diameter 0250 Shank Diameter

Niagara Cutter N55808 Carbide Square Nose End Mill, Inch, TiAlN Finish, Roughing and Finishing Cut, 30 Degree Helix, 4 Flutes, 4″ Overall Length, 0.250″ Cutting Diameter, 0.250″ Shank Diameter

Niagara Cutter N55808 Carbide Square Nose End Mill, Inch, TiAlN Finish, Roughing and Finishing Cut, 30 Degree Helix, 4 Flutes, 4″ Overall Length, 0.250″ Cutting Diameter, 0.250″ Shank Diameter - Carbide can run at higher speeds than high-speed steel, resisting abrasion and high cutting temperatures. Four flutes produce a better finish than fewer flutes. Center-cutting design allows the end mill to plunge into material like a drill bit while also performing conventional surface milling. Titanium aluminum nitride (tialn) coating lubricates the end mill for high-temperature stability and abrasion resistance at high cutting speeds, offering better heat resistance than tin and ticn coatings. Square nose end mills (also called square end) create sharp, unrounded cuts.

 

SGS Tool Company 19038 SD-3Nf Carbide Bur 38 Diameter 14 Shank Diameter

SGS Tool Company 19038 SD-3Nf Carbide Bur 3/8 Diameter 1/4 Shank Diameter

SGS Tool Company 19038 SD-3Nf Carbide Bur 3/8 Diameter 1/4 Shank Diameter - Sd-3nf bur. Made in usa. Ball shape. 1/4 shank diameter.

 

Niagara Cutter N30326 High Speed Steel HSS Square Nose End Mill Inch Uncoated Bright Finish Finishing Cut 30 Degree Helix 3 Flutes 65 Overall Length 1000 Cutting Diameter 1000 Shank Diameter

Niagara Cutter N30326 High Speed Steel (HSS) Square Nose End Mill, Inch, Uncoated (Bright) Finish, Finishing Cut, 30 Degree Helix, 3 Flutes, 6.5″ Overall Length, 1.000″ Cutting Diameter, 1.000″ Shank Diameter

Niagara Cutter N30326 High Speed Steel (HSS) Square Nose End Mill, Inch, Uncoated (Bright) Finish, Finishing Cut, 30 Degree Helix, 3 Flutes, 6.5″ Overall Length, 1.000″ Cutting Diameter, 1.000″ Shank Diameter - Three flutes provide better chip-carrying capacity than four flutes and a finer finish than two, reducing the need for a second finishing cut in some applications. Uncoated (bright) tools have no additional surface treatment or coating for use on a broad range of materials. Square nose end mills (also called square end) create sharp, unrounded cuts. Center-cutting design allows the end mill to plunge into material like a drill bit while also performing conventional surface milling. High-speed steel is compatible with a variety of materials.

 

Eagle Tool EHS37536 Heavy Duty Split Point High Speed Installer Bit  316 Shank Diameter 38 Head Diameter x 36 Length For Steel Pack of 1

Eagle Tool EHS37536 Heavy Duty Split Point High Speed Installer Bit, 3/16″ Shank Diameter, 3/8″ Head Diameter x 36″ Length, For Steel (Pack of 1)

Eagle Tool EHS37536 Heavy Duty Split Point High Speed Installer Bit, 3/16″ Shank Diameter, 3/8″ Head Diameter x 36″ Length, For Steel (Pack of 1) - Add a quick switch hex to adapt to a quick change chuck part number ethxkit187. Flexible spring steel shank with wire fishing accommodation holes in the head and shank. Heavy duty high speed, split point for better starting. Three flat non-slip grip on the chuck end. Made in usa.

 

Cobra Carbide 10555 Micro Grain Solid Carbide Regular Length Burr with Ball End Double Cut Shape D SD-11 14 Shank Diameter 18 Head Diameter 332 Cutting Length Pack of 1

Cobra Carbide 10555 Micro Grain Solid Carbide Regular Length Burr with Ball End, Double Cut, Shape D SD-11, 1/4″ Shank Diameter, 1/8″ Head Diameter, 3/32″ Cutting Length (Pack of 1)

Cobra Carbide 10555 Micro Grain Solid Carbide Regular Length Burr with Ball End, Double Cut, Shape D SD-11, 1/4″ Shank Diameter, 1/8″ Head Diameter, 3/32″ Cutting Length (Pack of 1) - Slight left hand cutting action gives excellent control of the burr and grinder. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. Permits faster penetration and material removal rates, due to the chisel edge reduced pull improves control and reduces operator fatigue. Round shanks allow use with a wide variety of toolholding systems. Double-cut style has rows of cutting teeth cut in two intersecting directions for fast material removal and a rougher finish.

 

uxcell Magnetic 4mm Tip 63mm Shank Diameter Hex Bits 10 Pcs

uxcell® Magnetic 4mm Tip 6.3mm Shank Diameter Hex Bits 10 Pcs

uxcell® Magnetic 4mm Tip 6.3mm Shank Diameter Hex Bits 10 Pcs - Uxcell (u excel ) is the sole authorized seller of uxcell products. Product name screwdriver bithex tip width 4mm/ 0157″shank size 63mm/ 1/4″. Each one length 50mm/ 196″color gray. Package content 10 x screwdriver bits. Material metaltotal weight 107g.

 

Freud 04-102 316-Inch Diameter by 12-Inch Double Flute Straight Router Bit with 14-Inch Shank

Freud 04-102 3/16-Inch Diameter by 1/2-Inch Double Flute Straight Router Bit with 1/4-Inch Shank

Freud 04-102 3/16-Inch Diameter by 1/2-Inch Double Flute Straight Router Bit with 1/4-Inch Shank - Freud’s precision ground carbide bits have a grain size smaller than other grades, and titanium is added making them impervious to chemical attack. Promoting safer woodworking is the reason freud made a commitment to develop anti-kickback router bits. Freud’s philosophy is woodworkers should expect safety, not pay for it. Cut diameter 3/16-inch, cut length 1/2-inch, shank diameter 1/4-inch. Bits are computer balanced to insure vibration-free operation at speeds that are a safe margin above the typical 22,000 rpms of most routers.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.