Top 18 Square Noses

 

Niagara Cutter N55442 Carbide Square Nose End Mill Inch TiAlN Finish Roughing and Finishing Cut 30 Degree Helix 2 Flutes 4 Overall Length 0313 Cutting Diameter 0313 Shank Diameter

Niagara Cutter N55442 Carbide Square Nose End Mill, Inch, TiAlN Finish, Roughing and Finishing Cut, 30 Degree Helix, 2 Flutes, 4″ Overall Length, 0.313″ Cutting Diameter, 0.313″ Shank Diameter

Niagara Cutter N55442 Carbide Square Nose End Mill, Inch, TiAlN Finish, Roughing and Finishing Cut, 30 Degree Helix, 2 Flutes, 4″ Overall Length, 0.313″ Cutting Diameter, 0.313″ Shank Diameter - Square nose end mills (also called square end) create sharp, unrounded cuts. Center-cutting design allows the end mill to plunge into material like a drill bit while also performing conventional surface milling. Carbide can run at higher speeds than high-speed steel, resisting abrasion and high cutting temperatures. Two flutes offer better chip-carrying capacity than end mills with more flutes, enhancing the tool’s ability to remove material. Titanium aluminum nitride (tialn) coating lubricates the end mill for high-temperature stability and abrasion resistance at high cuttings speeds, offering better heat resistance than tin and ticn coatings.

 

Niagara Cutter N61647 Carbide Square Nose End Mill Inch TiCN Finish Roughing and Finishing Cut 45 Degree Helix 3 Flutes 4 Overall Length 0375 Cutting Diameter 0375 Shank Diameter

Niagara Cutter N61647 Carbide Square Nose End Mill, Inch, TiCN Finish, Roughing and Finishing Cut, 45 Degree Helix, 3 Flutes, 4″ Overall Length, 0.375″ Cutting Diameter, 0.375″ Shank Diameter

Niagara Cutter N61647 Carbide Square Nose End Mill, Inch, TiCN Finish, Roughing and Finishing Cut, 45 Degree Helix, 3 Flutes, 4″ Overall Length, 0.375″ Cutting Diameter, 0.375″ Shank Diameter - 45-degree helix provides the efficient cutting action and chip evacuation required to machine aluminum and other nonferrous materials. Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures. Three flutes provide better chip-carrying capacity than four flutes and a finer finish than two, reducing the need for a second finishing cut in some applications. Square nose end mills (also called square end) create sharp, unrounded cuts. Titanium carbon nitride (ticn) coating lubricates the end mill for high-temperature stability and offers the abrasion resistance required to machine aluminum and other nonferrous materials.

 

Niagara Cutter N85267 Carbide Square Nose End Mill Inch Uncoated Bright Finish Roughing and Finishing Cut 30 Degree Helix 2 Flutes 15 Overall Length 0125 Cutting Diameter 0125 Shank Diameter

Niagara Cutter N85267 Carbide Square Nose End Mill, Inch, Uncoated (Bright) Finish, Roughing and Finishing Cut, 30 Degree Helix, 2 Flutes, 1.5″ Overall Length, 0.125″ Cutting Diameter, 0.125″ Shank Diameter

Niagara Cutter N85267 Carbide Square Nose End Mill, Inch, Uncoated (Bright) Finish, Roughing and Finishing Cut, 30 Degree Helix, 2 Flutes, 1.5″ Overall Length, 0.125″ Cutting Diameter, 0.125″ Shank Diameter - Carbide can run at higher speeds than high-speed steel, resisting abrasion and high cutting temperatures. Uncoated (bright) tools have no additional surface treatment or coating for use on a broad range of materials. Center-cutting design allows the end mill to plunge into material like a drill bit while also performing conventional surface milling. Square nose end mills (also called square end) create sharp, unrounded cuts. Two flutes offer better chip-carrying capacity than end mills with more flutes, enhancing the tool’s ability to remove material.

 

YG-1 E5065 Carbide Square Nose End Mill Extra Long Reach Uncoated Bright Finish 30 Deg Helix 4 Flutes 4 Overall Length 025 Cutting Diameter 025 Shank Diameter

YG-1 E5065 Carbide Square Nose End Mill, Extra Long Reach, Uncoated (Bright) Finish, 30 Deg Helix, 4 Flutes, 4″ Overall Length, 0.25″ Cutting Diameter, 0.25″ Shank Diameter

YG-1 E5065 Carbide Square Nose End Mill, Extra Long Reach, Uncoated (Bright) Finish, 30 Deg Helix, 4 Flutes, 4″ Overall Length, 0.25″ Cutting Diameter, 0.25″ Shank Diameter - Uncoated (bright) tools have no additional surface treatment or coating for use on a broad range of materials. Suitable for general-purpose machining on hardened and high-alloy steel, steel casting, malleable cast iron, chromium-nickel steel, brass, copper, aluminum with a high percentage of silicon, and abrasive plastic. Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures. Four flutes produce a better finish than fewer flutes. Extra-long-length end mills have longer cutting edges and can make deeper cuts than long-length end mills.

 

Niagara Cutter N75683 Cobalt Steel Square Nose End Mill Weldon Shank TiAlN Finish Roughing Cutting Non-Center 30-Degree Helix 4-Flute 475 OAL 0750 Cut Diameter 0750 Shank Diameter

Niagara Cutter N75683 Cobalt Steel Square Nose End Mill, Weldon Shank, TiAlN Finish, Roughing Cutting, Non-Center, 30-Degree Helix, 4-Flute, 4.75″ OAL, 0.750″ Cut Diameter, 0.750″ Shank Diameter

Niagara Cutter N75683 Cobalt Steel Square Nose End Mill, Weldon Shank, TiAlN Finish, Roughing Cutting, Non-Center, 30-Degree Helix, 4-Flute, 4.75″ OAL, 0.750″ Cut Diameter, 0.750″ Shank Diameter - Titanium aluminum nitride (tialn) coating lubricates the end mill for high-temperature stability and abrasion resistance at high cutting speeds, offering better heat resistance than tin and ticn coatings. Roughing end mills have chip-breaking cutting edges that remove material in less time than conventional end mills. Square end creates sharp, unrounded cuts and has a corner chamfer to strengthen the cutting edges. Number of flutes varies by diameter for optimum feed and cut rate. Fine-pitch tooth design is suitable for machining high-temperature alloys.

 

DIAOSnx 18 532 316 14 516 38 12 High Speed Steel HSS 4 Flute Straight Shank Square Nose End Mill Cutter CNC Router Bits Cutting Milling Tools Set of 7

DIAOSnx 1/8″ 5/32” 3/16″ 1/4″ 5/16″ 3/8″ 1/2″ High Speed Steel HSS 4 Flute Straight Shank Square Nose End Mill Cutter CNC Router Bits Cutting Milling Tools (Set of 7)

DIAOSnx 1/8″ 5/32” 3/16″ 1/4″ 5/16″ 3/8″ 1/2″ High Speed Steel HSS 4 Flute Straight Shank Square Nose End Mill Cutter CNC Router Bits Cutting Milling Tools (Set of 7) - Note due to the different measurement methods, the size may have 1-2cm error. Package includes 7×end mill cutter hss-al, 4 flute, straight shank, square nose. Suitable for cnc data processing center, carved, high-speed machines can milling of copper, aluminum, tool steel, cast iron, etc square nose endmills size 1/8” cutter blade diameter=1/8”, shank diameter=1/4”, flute length=7/16”, overall length=2-3/8” 5/32” cutter blade diameter=5/32”, shank diameter=1/4, flute length=1/2”, overall length=2-1/4” 3/16” cutter blade diameter=3/16”, shank diameter=1/4”, flute length=9/16”, overall length=2-1/4” 1/4” cutter blade diameter=1/4”, shank diameter=1/4”, flute length=3/4”, overall length=2-1/3” 5/16” cutter blade diameter=5/16”, shank diameter=5/16””, flute length=7/8”, overall length=2-4/9” 3/8” cutter blade diameter=3/8”, shank diameter=3/8”, flute length=1”, overall length=2-3/4” 1/2” cutter blade diameter=1/2”, shank diameter=1/2”, flute length=1-1/2”,overall length=3-3/8”.

 

EnPointâ„¢ High Hardness Aluminum Cutting 2 Flutes Carbide End Mill 18 3175mm Shank 1mm Cutter Dia Metalworking Square Nose CNC Spiral Milling Cutter for Brass Copper Foil IC Substrate

EnPointâ„¢ High Hardness Aluminum Cutting 2 Flutes Carbide End Mill 1/8″ 3.175mm Shank 1mm Cutter Dia Metalworking Square Nose CNC Spiral Milling Cutter for Brass Copper Foil IC Substrate

EnPointâ„¢ High Hardness Aluminum Cutting 2 Flutes Carbide End Mill 1/8″ 3.175mm Shank 1mm Cutter Dia Metalworking Square Nose CNC Spiral Milling Cutter for Brass Copper Foil IC Substrate - Less heat build up 2 flutes also allow for faster feed and speed rates. Produced from a premium ultra fine solid carbide for maximum tool strength and durability. Sharp cutting edge produces an excellent surface finish and great work efficiency. 2 flutes with large spiral chip groove bring better chip evacuation, preventing from sticking chips. Mainly for cutting aluminum substrate, full copper foil and other high ductility metal plates and it can also be used for pbga/boc/csp and intergrated circuit substrate molding.

 

YG-1 E5020 Carbide Square Nose End Mill Uncoated Bright Finish 30 Deg Helix 2 Flutes 25 Overall Length 0375 Cutting Diameter 0375 Shank Diameter

YG-1 E5020 Carbide Square Nose End Mill, Uncoated (Bright) Finish, 30 Deg Helix, 2 Flutes, 2.5″ Overall Length, 0.375″ Cutting Diameter, 0.375″ Shank Diameter

YG-1 E5020 Carbide Square Nose End Mill, Uncoated (Bright) Finish, 30 Deg Helix, 2 Flutes, 2.5″ Overall Length, 0.375″ Cutting Diameter, 0.375″ Shank Diameter - Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures. Uncoated (bright) tools have no additional surface treatment or coating for use on a broad range of materials. Center-cutting design allows the end mill to plunge into material like a drill bit for applications such as slotting, drilling, and pocketing, as well as general-purpose machining. Suitable for machining on hardened and high-alloy steel, chromium-nickel steel, steel casting, malleable cast iron, brass, copper, aluminum with a high percentage of silicon, and abrasive plastic. Two flutes offer better chip-carrying capacity than end mills with more flutes, enhancing the tool’s ability to remove material.

 

Melin Tool AMG-E Carbide Square Nose End Mill AlTiN Monolayer Finish 30 Deg Helix 2 Flutes 4 Overall Length 02500 Cutting Diameter 025 Shank Diameter

Melin Tool AMG-E Carbide Square Nose End Mill, AlTiN Monolayer Finish, 30 Deg Helix, 2 Flutes, 4″ Overall Length, 0.2500″ Cutting Diameter, 0.25″ Shank Diameter

Melin Tool AMG-E Carbide Square Nose End Mill, AlTiN Monolayer Finish, 30 Deg Helix, 2 Flutes, 4″ Overall Length, 0.2500″ Cutting Diameter, 0.25″ Shank Diameter - Suitable for general-purpose machining on most medium-hardness materials, including steel and iron. Extra-long-length end mills have longer cutting edges and can make deeper cuts than long-length end mills. Aluminum titanium nitride (altin) coating lubricates the end mill for high-temperature stability and abrasion resistance at high cutting speeds, offering better heat resistance than tin, tialn, and ticn coatings. Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures. Square nose end mills (also called square end) create sharp, unrounded cuts.

 

Niagara Cutter N72326 Cobalt Steel Square Nose End Mill Weldon Shank Uncoated Bright Finish Roughing Cut Non-Center 30-Degree 5-Flute 65 OAL 1000 Cut Diameter 1000 Shank Diameter

Niagara Cutter N72326 Cobalt Steel Square Nose End Mill, Weldon Shank, Uncoated Bright Finish, Roughing Cut, Non-Center, 30-Degree, 5-Flute, 6.5″ OAL, 1.000″ Cut Diameter, 1.000″ Shank Diameter

Niagara Cutter N72326 Cobalt Steel Square Nose End Mill, Weldon Shank, Uncoated Bright Finish, Roughing Cut, Non-Center, 30-Degree, 5-Flute, 6.5″ OAL, 1.000″ Cut Diameter, 1.000″ Shank Diameter - Number of flutes varies by diameter for optimum feed and cut rate. Cobalt steel resists abrasion and high cutting temperatures, and has higher feed rates than high-speed steel. Roughing end mills have chip-breaking cutting edges that remove material in less time than conventional end mills. Coarse-pitch tooth design is suitable for machining soft, gummy materials. Square end creates sharp, unrounded cuts and has a corner chamfer to strengthen the cutting edges.

 

CGC Tools CEM18F4TIALN Primate Square Nose End Mill TiAlN Coating 4 Flute 18 Diameter 12 LOC 1-12 OAL

CGC Tools CEM18F4TIALN Primate Square Nose End Mill, TiAlN Coating, 4 Flute, 1/8″ Diameter, 1/2″ LOC, 1-1/2″ OAL

CGC Tools CEM18F4TIALN Primate Square Nose End Mill, TiAlN Coating, 4 Flute, 1/8″ Diameter, 1/2″ LOC, 1-1/2″ OAL - This weapon of mass production destroy any competition. Usa, flat, 4 flute, 1/8” diameter, 1/2” length of cut, 1-1/2” overall length, tialn coating. Gmp edge prepped to hone the “ridges” to reduce fracturing during the milling process while greatly increasing tool life and enhancing finish. Highest transverse rupture strength (trs) nano-grain carbide substrate available and completely resharpenable. Extremely versatile in various materials, center cutting, solid sub-micron carbide.

 

Moldings Online 78 x 15625 x 088 Armstrong Oceanside Gray Prime Harvest Red Oak Square Nose 78 L

Moldings Online 78″ x 1.5625″ x 0.88″ Armstrong Oceanside Gray Prime Harvest Red Oak Square Nose, 78″ L

Moldings Online 78″ x 1.5625″ x 0.88″ Armstrong Oceanside Gray Prime Harvest Red Oak Square Nose, 78″ L - . Square nosing is ideal for concealing expansion spaces along a vertical object that cannot be framed, such as sliding glass door or brick fireplace.

 

Niagara Cutter N46420 Carbide Square Nose End Mill Metric AlTiN Finish Roughing and Finishing Cut 30 Degree Helix 4 Flutes 39mm Overall Length 3mm Cutting Diameter 3000mm Shank Diameter

Niagara Cutter N46420 Carbide Square Nose End Mill, Metric, AlTiN Finish, Roughing and Finishing Cut, 30 Degree Helix, 4 Flutes, 39mm Overall Length, 3mm Cutting Diameter, 3.000mm Shank Diameter

Niagara Cutter N46420 Carbide Square Nose End Mill, Metric, AlTiN Finish, Roughing and Finishing Cut, 30 Degree Helix, 4 Flutes, 39mm Overall Length, 3mm Cutting Diameter, 3.000mm Shank Diameter - Square nose end mills (also called square end) create sharp, unrounded cuts. Center-cutting design allows the end mill to plunge into material like a drill bit while also performing conventional surface milling. Carbide can run at higher speeds than high-speed steel, resisting abrasion and high cutting temperatures. Aluminum titanium nitride (altin) coating lubricates the end mill for high-temperature stability and abrasion resistance, offering better heat resistance than tin, tialn, and ticn coatings. Four flutes produce a better finish than fewer flutes.

 

CGC Tools CEM14F2 Primate Square Nose End Mill 2 Flute 14 Diameter 34 LOC 2-12 OAL

CGC Tools CEM14F2 Primate Square Nose End Mill, 2 Flute, 1/4″ Diameter, 3/4″ LOC, 2-1/2″ OAL

CGC Tools CEM14F2 Primate Square Nose End Mill, 2 Flute, 1/4″ Diameter, 3/4″ LOC, 2-1/2″ OAL - Extremely versatile in various materials, center cutting, solid sub-micron carbide. Usa, flat, 2 flute, 1/4” diameter, 3/4” length of cut, 2-1/2” overall length. This weapon of mass production destroy any competition. Highest transverse rupture strength (trs) nano-grain carbide substrate available and completely resharpenable. Gmp edge prepped to hone the “ridges” to reduce fracturing during the milling process while greatly increasing tool life and enhancing finish.

 

Precision Twist E6304 Carbide Square Nose End Mill Long Reach Uncoated Bright Finish 30 Deg Helix 4 Flutes 6 Overall Length 12 Cutting Diameter 12 Shank Diameter

Precision Twist E6304 Carbide Square Nose End Mill, Long Reach, Uncoated (Bright) Finish, 30 Deg Helix, 4 Flutes, 6″ Overall Length, 1/2″ Cutting Diameter, 1/2″ Shank Diameter

Precision Twist E6304 Carbide Square Nose End Mill, Long Reach, Uncoated (Bright) Finish, 30 Deg Helix, 4 Flutes, 6″ Overall Length, 1/2″ Cutting Diameter, 1/2″ Shank Diameter - Uncoated (bright) tools have no additional surface treatment or coating for use on a broad range of materials. Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures. Square nose end mills (also called square end) create sharp, unrounded cuts. Extra-long length end mills have longer cutting edges and can make deeper cuts than long-length end mills. Four flutes produce a better finish than fewer flutes.

 

EnPointâ„¢ High Hardness Aluminum Cutting 2 Flutes Carbide End Mill 18 3175mm Shank 3175mm Cutter Diameter Metalwoking Square Nose Spiral CNC Milling Cutter for Brass Copper Foil IC Substrate

EnPointâ„¢ High Hardness Aluminum Cutting 2 Flutes Carbide End Mill 1/8″ 3.175mm Shank 3.175mm Cutter Diameter Metalwoking Square Nose Spiral CNC Milling Cutter for Brass Copper Foil IC Substrate

EnPointâ„¢ High Hardness Aluminum Cutting 2 Flutes Carbide End Mill 1/8″ 3.175mm Shank 3.175mm Cutter Diameter Metalwoking Square Nose Spiral CNC Milling Cutter for Brass Copper Foil IC Substrate - Less heat build up 2 flutes also allow for faster feed and speed rates. Produced from a premium ultra fine solid carbide for maximum tool strength and durability. Mainly for cutting aluminum substrate, full copper foil and other high ductility metal plates and it can also be used for pbga/boc/csp and intergrated circuit substrate molding. Sharp cutting edge produces an excellent surface finish and great work efficiency. 2 flutes with large spiral chip groove bring better chip evacuation, preventing from sticking chips.

 

Niagara Cutter N85658 Carbide Square Nose End Mill Inch Uncoated Bright Finish Roughing and Finishing Cut 30 Degree Helix 4 Flutes 2 Overall Length 0250 Cutting Diameter 0250 Shank Diameter

Niagara Cutter N85658 Carbide Square Nose End Mill, Inch, Uncoated (Bright) Finish, Roughing and Finishing Cut, 30 Degree Helix, 4 Flutes, 2″ Overall Length, 0.250″ Cutting Diameter, 0.250″ Shank Diameter

Niagara Cutter N85658 Carbide Square Nose End Mill, Inch, Uncoated (Bright) Finish, Roughing and Finishing Cut, 30 Degree Helix, 4 Flutes, 2″ Overall Length, 0.250″ Cutting Diameter, 0.250″ Shank Diameter - Center-cutting design allows the end mill to plunge into material like a drill bit while also performing conventional surface milling. Four flutes produce a better finish than fewer flutes. Uncoated (bright) tools have no additional surface treatment or coating for use on a broad range of materials. Square nose end mills (also called square end) create sharp, unrounded cuts. Carbide can run at higher speeds than high-speed steel, resisting abrasion and high cutting temperatures.

 

Niagara Cutter N40321 High Speed Steel Square Nose End Mill Weldon Shank TiN Finish Roughing and Finishing Cutting 30-Degree 4-Flute 4125 OAL 1000 Cut Diameter 0750 Shank Diameter

Niagara Cutter N40321 High Speed Steel Square Nose End Mill, Weldon Shank, TiN Finish, Roughing and Finishing Cutting, 30-Degree, 4-Flute, 4.125″ OAL, 1.000″ Cut Diameter, 0.750″ Shank Diameter

Niagara Cutter N40321 High Speed Steel Square Nose End Mill, Weldon Shank, TiN Finish, Roughing and Finishing Cutting, 30-Degree, 4-Flute, 4.125″ OAL, 1.000″ Cut Diameter, 0.750″ Shank Diameter - Positive single-sided insert with 7-degree clearance angle for light cutting forces and side clearance. Square shape offers edge strength and is suitable for roughing, facing, interrupted cuts, and large lead angles. H13a uncoated carbide grade provides a balance of hardness and toughness for resistance to wear and shock. Designed for turning operations, roughing to medium machining — on aluminum in average machining conditions. Roughing (kr) and medium-machining (km) chipbreaker styles help prevent chip buildup at a range of cutting depths and feed rates.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.