Top 21 Best Ogee Router Bits

 

KATANA Raised Panel Ogee Router Bit Set with Undercutter

KATANA Raised Panel Ogee Router Bit Set with Undercutter

KATANA Raised Panel Ogee Router Bit Set with Undercutter - Euro anti-kickback design for smooth cuts and safety exclusive safety gauge shank. Years of safe, reliable performance the best materialsno design shortcuts. Lifetime guarantee. State of the art safety, durability, and performance. Premium katana micro-grain carbide, diamond-honed and precision ground.

 

Neiko 10111A Ogee Cutter Router Bit Set for Cabinets Handrails and Other Wood Surfaces  12-inch Shank  3-Piece Set

Neiko 10111A Ogee Cutter Router Bit Set for Cabinets, Handrails and Other Wood Surfaces | 1/2-inch Shank | 3-Piece Set

Neiko 10111A Ogee Cutter Router Bit Set for Cabinets, Handrails and Other Wood Surfaces | 1/2-inch Shank | 3-Piece Set - For the decorative touch set of three sharp and durable ogee router bits to carve ogee patterns in cabinet doors and other wood surfaces. Includes wooden case ideal for decorative capping on hand rails, set includes a beautiful wood case with clear cover for storage. Stays sharp made of hardened heat-treated steel shanks with c3 micro-grain carbide cutters and bodies that will stay sharp job after job. Reduces kickback smooth-running bearings and controlled depth design allows smooth sculpting with reduced kickback. Table saw ready ½” shank fits most table saws and gives pros and diy woodworkers leverage for precision molding.

 

Amana Tool 49232 Carbide Tipped Plunge Raised Ogee Style B 38 R x 1-58 D x 2332 CH x 12 Inch SHK Router Bit

Amana Tool 49232 Carbide Tipped Plunge Raised Ogee Style B 3/8 R x 1-5/8 D x 23/32 CH x 1/2 Inch SHK Router Bit

Amana Tool 49232 Carbide Tipped Plunge Raised Ogee Style B 3/8 R x 1-5/8 D x 23/32 CH x 1/2 Inch SHK Router Bit - Plunge raised ogee router bits style b.

 

Classic Roman Ogee Router Bit - 18 Radius x 12 Cut Height 12 Shank

Classic Roman Ogee Router Bit – 1/8” Radius x 1/2” Cut Height (1/2” Shank)

Classic Roman Ogee Router Bit – 1/8” Radius x 1/2” Cut Height (1/2” Shank) - Final sharpening with 600, 800 grit diamond wheels. K10 and k20 grade carbide for clean cutting action.

 

Yonico 12134 Base BoardPanel Raiser Ogee Router Bit with 2-12-Inch Diameter 12-Inch Shank

Yonico 12134 Base Board/Panel Raiser Ogee Router Bit with 2-1/2-Inch Diameter 1/2-Inch Shank

Yonico 12134 Base Board/Panel Raiser Ogee Router Bit with 2-1/2-Inch Diameter 1/2-Inch Shank - Two flute carbide cutters & 1/2″ shank. You may use in conjunction with any of our rail and stile router bits. Ogee design baseboards add beauty and style to any decor. When used as a panel raiser, this 2-1/2″ router bit will create door panels with a smaller than standard profile. Features • industrial quality • c3 tungsten carbide cutters • solid hardened steel body • anti-kickback design • build-up resistant coating • satisfaction guaranteed. This versatile 2-1/2″ diameter router bit can be used to make beautiful ogee design baseboards as well as raised panels for cabinet doors.

 

uxcell 12-Inch Shank Dia 38-Inch Cutting Radius Roman Ogee Router Bit Cutter w Ball Bearing

uxcell 1/2-Inch Shank Dia 3/8-Inch Cutting Radius Roman Ogee Router Bit Cutter w Ball Bearing

uxcell 1/2-Inch Shank Dia 3/8-Inch Cutting Radius Roman Ogee Router Bit Cutter w Ball Bearing - Cutting radius 952mm / 3/8″ cutting depth 255mm / 1″ overall diameter 511mm / 2″. Overall length 74mm / 29″ color beige,silver tone bearing diameter 127mm / 1/2″. Cutting width 19mm / 3/4″ cutting diameter 1-1/2″. Product name roman ogee router bit w ball bearing material tungsten carbide weight 152g. Package content 1 x roman ogee router bit w ball bearing standard 1/2″ x 1-1/2″ shank diameter 1/2″.

 

CMT 84077011 Roman Ogee Router Bit 12-Inch Shank 1-18-Inch Overall Diameter 2964-Inch Cutting Length

CMT 840.770.11 Roman Ogee Router Bit 1/2-Inch Shank, 1-1/8-Inch Overall Diameter, 29/64-Inch Cutting Length

CMT 840.770.11 Roman Ogee Router Bit 1/2-Inch Shank, 1-1/8-Inch Overall Diameter, 29/64-Inch Cutting Length - 2 sinterhip hi-density industrial chrome carbide cutting edges for long-lasting performance. Appropriate for many classical projects creates a wavy profile with a bead on the top. Cmt bits were rated the best overall in comparison to other brand (test by wood magazine). 1-1/8-inch diameter, 29/64-inch cutting length. Non-stick orange shield coating, anti-kickback design, equipped with bearing.

 

Kempston KC3021 Panel Raiser-Roman Ogee Router Bit and Reversible Rail and Stile Cutter 14 Inch Shank 2-Piece Set

Kempston KC3021 Panel Raiser-Roman Ogee Router Bit and Reversible Rail and Stile Cutter, 1/4 Inch Shank, 2-Piece Set

Kempston KC3021 Panel Raiser-Roman Ogee Router Bit and Reversible Rail and Stile Cutter, 1/4 Inch Shank, 2-Piece Set - C3 or c4 premium carbide. Cnc precision ground. Professional grade. Non-stick coating. Anti-kickback design.

 

Task Tools T24293 Roman Ogee Fillet Router Bit with 14-Inch Shank 1-38-Inch by 12-Inch Carbide Height 316-Inch Radius

Task Tools T24293 Roman Ogee Fillet Router Bit with 1/4-Inch Shank, 1-3/8-Inch by 1/2-Inch Carbide Height, 3/16-Inch Radius

Task Tools T24293 Roman Ogee Fillet Router Bit with 1/4-Inch Shank, 1-3/8-Inch by 1/2-Inch Carbide Height, 3/16-Inch Radius - Roman ogee fillet router bit with 1/4-inch heat-treated, hardened steel shank double flute for quick cuts. Premium quality super fine grain tungsten carbide for an exceptionally smooth finish. Non-stick powder coat finish reduces friction and resin build-up to protect from corrosion. Size 1-3/8-inch diameter by 1/2-inch carbide height 3/16-inch radius. Dynamically balanced up to 24,000 rpm to reduce vibration and kickback.

 

EnPointâ„¢1564 6mm Medium Carbon Steel Shank Woodworking Table Edge Router Bit With Cove 22mm Dia Carbide-Tipped Plunge Ogee Router Bit Woodworking Flush Trim Router Bit for Carbon Fiber Acrylic

EnPointâ„¢15/64″ 6mm Medium Carbon Steel Shank Woodworking Table Edge Router Bit With Cove 22mm Dia Carbide-Tipped Plunge Ogee Router Bit Woodworking Flush Trim Router Bit for Carbon Fiber Acrylic

EnPointâ„¢15/64″ 6mm Medium Carbon Steel Shank Woodworking Table Edge Router Bit With Cove 22mm Dia Carbide-Tipped Plunge Ogee Router Bit Woodworking Flush Trim Router Bit for Carbon Fiber Acrylic - With use of high-frequency welding comes outstanding longevity, little chance of breaking high-speed steel body for high hardness, wear-resisting and heat-resisting. It is usually used for architectural and furniture molding and also be used in handled, table-mounted and cnc router. Mainly used for hardwood, redwood, acrylic, medium density fiber, pvc etc, using plunge form bits for routing decorative details on the face side of raised pannels or solid wood paneling, or on the edge using a fence. Carbide-tipped cutting edge brings sharper cutting experience and high work efficiency.

 

KATANA Raised Panel Ogee Router Bit Set

KATANA Raised Panel Ogee Router Bit Set

KATANA Raised Panel Ogee Router Bit Set - Years of safe, reliable performance the best materialsno design shortcuts. Euro anti-kickback design for smooth cuts and safety exclusive safety gauge shank. State of the art safety, durability, and performance. Premium katana micro-grain carbide, diamond-honed and precision ground. Lifetime guarantee.

 

3602 CARBIDE-TIP 2 FLUTE PLUNGING OGEE ROUTER BIT 332 RADIUS X 18 SMALL DIA X 12 LARGE DIA

3602 CARBIDE-TIP 2 FLUTE PLUNGING OGEE ROUTER BIT 3/32 RADIUS X 1/8″ SMALL DIA X 1/2″ LARGE DIA

3602 CARBIDE-TIP 2 FLUTE PLUNGING OGEE ROUTER BIT 3/32 RADIUS X 1/8″ SMALL DIA X 1/2″ LARGE DIA - Uses the highest quality american made micrograin carbide. Made with thick carbide for extra sharpenings. Made from solid alloy steel. Precision ground for proper balance at high rpms. American made for the american woodworker.

 

PORTER-CABLE 43175PC Ogee Router Bit with Fillet

PORTER-CABLE 43175PC Ogee Router Bit with Fillet

PORTER-CABLE 43175PC Ogee Router Bit with Fillet - Overall length 2 9/32″. Shank diameter 1/4″. Radius 3/16″. Flute length 9/16. Graceful decorative design may be routed with or without fillet.

 

Yonico 12162 Drawer and Cabinet Door Front Edging Medium Ogee Router Bit 12-Inch Shank

Yonico 12162 Drawer and Cabinet Door Front Edging Medium Ogee Router Bit 1/2-Inch Shank

Yonico 12162 Drawer and Cabinet Door Front Edging Medium Ogee Router Bit 1/2-Inch Shank - Build-up and heat resistant teflon coating. Industrial quality router bits. C3 micro-grain tungsten carbide cutters. Satisfaction guaranteed and lifetime warranty. Solid hardened steel bodies with anti-kickback design. Satisfaction guaranteed & lifetime warranty. Build-up & heat resistant teflon coating.

 

Bosch 85592MC 14-Inch Cut 12-Inch Shank Roman Ogee Router Bit With Ball Bearing

Bosch 85592MC 1/4-Inch Cut 1/2-Inch Shank Roman Ogee Router Bit With Ball Bearing

Bosch 85592MC 1/4-Inch Cut 1/2-Inch Shank Roman Ogee Router Bit With Ball Bearing - Recommended for use with a routing table. All bits must be inserted in the full length of the collet be sure to use only router bits and accessories specifically designed for your router.

 

PORTER-CABLE 43600PC Roman Ogee Router Bit

PORTER-CABLE 43600PC Roman Ogee Router Bit

PORTER-CABLE 43600PC Roman Ogee Router Bit - Medium carbon steel for shank and super fine mirror-like finish, excellent carbide brazing. With use of high-frequency welding comes outstanding longevity, little chance of breaking high-speed steel body for high hardness, wear-resisting and heat-resisting. Carbide-tipped cutting edge brings sharper cutting experience and high work efficiency. It is usually used for architectural and furniture molding and also be used in handled, table-mounted and cnc router. Mainly used for hardwood, redwood, acrylic, medium density fiber, pvc etc, using plunge form bits for routing decorative details on the face side of raised pannels or solid wood paneling, or on the edge using a fence.

 

Bosch 85270MC 12-Inch Cut 14-Inch Shank Roman Ogee Router Bit With Ball Bearing

Bosch 85270MC 1/2-Inch Cut 1/4-Inch Shank Roman Ogee Router Bit With Ball Bearing

Bosch 85270MC 1/2-Inch Cut 1/4-Inch Shank Roman Ogee Router Bit With Ball Bearing - Recommended for use with a routing table. All bits must be inserted in the full length of the collet be sure to use only router bits and accessories specifically designed for your router.

 

50 Pcs Tungsten Carbide Ogee Router Bits Set Woodworking 14 Shank ATE Tools

50 Pcs Tungsten Carbide Ogee Router Bits Set Woodworking 1/4″ Shank ATE Tools

50 Pcs Tungsten Carbide Ogee Router Bits Set Woodworking 1/4″ Shank ATE Tools - Bearing flush trim bits1/4″x3/8″x1/2″, 1/4″x3/8’x1″,1/4″x1/2″x1/2″, 1/4″x 1/2″x1″, 1/4″x3/4″x1″. Cutters bits 1/4″x1/4″x1/4″, 1/4″x1/4″x5/16″,1/4″ 1-1/4″x3/8″ 1/4″x1-1/4″, x1/2″,1/4″x3/8″x1″, 45. Chamber bits 1/4″x1/2″x1-3/16″, 1/4″x5/8″x1-7/16″, 1/4″x3/4″x1-5/8′. Round over bits 1/4″xr1/4″x1/4″xr3/8″, 1/4″xr1/2″. Specifications carbide tipped router bits.

 

Bosch 85270M 532-Inch Radius 58-Inch Cut Length Roman Ogee Router Bit with 14-Inch Shank

Bosch 85270M 5/32-Inch Radius 5/8-Inch Cut Length Roman Ogee Router Bit with 1/4-Inch Shank

Bosch 85270M 5/32-Inch Radius 5/8-Inch Cut Length Roman Ogee Router Bit with 1/4-Inch Shank - -quantity 1 per pack. -Shank diam 1/4 in. -Applicable materials wood. -Cutting direction right. -No. 85270m model code ab (part# 85270m) this item features -decorative edge forming bits. -End shape bearing pilot end. -Tool shape roman ogee. Len. -Cutting edge material carbide-tipped. = Overall length model code  model description aacorner radius1/4 in, cutting diam1 1/2 in, cutting length3/4 in, overall length2 3/8 in abcorner radius5/32 in, cutting diam1 1/8 in, cutting length1/2 in, overall length2 1/8 in. -Price is for 1 bit. = Overall length len. -Shank length 1 1/4 in. Of flutes 2.

 

Yonico 12163 Drawer and Cabinet Door Front Edging Large Ogee Router Bit 12-Inch Shank

Yonico 12163 Drawer and Cabinet Door Front Edging Large Ogee Router Bit 1/2-Inch Shank

Yonico 12163 Drawer and Cabinet Door Front Edging Large Ogee Router Bit 1/2-Inch Shank - Industrial quality router bits. Build-up & heat resistant teflon coating. Build-up and heat resistant teflon coating. Solid hardened steel bodies with anti-kickback design. C3 micro-grain tungsten carbide cutters. Satisfaction guaranteed & lifetime warranty. Satisfaction guaranteed and lifetime warranty.

 

Task Tools T24297 Classical Roman Ogee Router Bit with 14-Inch Shank 1-12-Inch by 34-Inch Carbide Height 14-Inch Radius

Task Tools T24297 Classical Roman Ogee Router Bit with 1/4-Inch Shank, 1-1/2-Inch by 3/4-Inch Carbide Height, 1/4-Inch Radius

Task Tools T24297 Classical Roman Ogee Router Bit with 1/4-Inch Shank, 1-1/2-Inch by 3/4-Inch Carbide Height, 1/4-Inch Radius - Premium quality super fine grain tungsten carbide for an exceptionally smooth finish. Classical roman ogee router bit with 1/4-inch heat-treated, hardened steel shank double flute for quick cuts. Dynamically balanced up to 24,000 rpm to reduce vibration and kickback. Size 1-1/2-inch diameter by 3/4-inch carbide height 1/4-inch radius. Non-stick powder coat finish reduces friction and resin build-up to protect from corrosion.