Top 21 Best V Drills in 2019

 

Magafor 888090H1000  Hard-X Carbide Multi-V Drill Bit 10 mm #ad

Magafor 888090H1000 Hard-X Carbide Multi-V Drill Bit, 10 mm

Magafor 888090H1000 Hard-X Carbide Multi-V Drill Bit, 10 mm #ad - Material of the product is carbide. Over all length of the product is 2375 inches. The product is manufactured in france.

 

V-Drill Guide Standard sizes 38 to 12 #ad

V-Drill Guide, Standard sizes 3/8″ to 1/2″

V-Drill Guide, Standard sizes 3/8″ to 1/2″ #ad - Non-plated material with light oil coating to prevent rust. Special nickel alloyed steel heat treated for durability. 9 drill sizes, 3/8″ to 1/2″ in 1/64″ increments. Alignment marks on guide to line up on center. Use on flat surfaces, round parts, and corners.

 

V-Drill Guide Standard sizes 38 to 12 by BIG GATOR TOOLS #ad

V-Drill Guide, Standard sizes 3/8 to 1/2 by BIG GATOR TOOLS

V-Drill Guide, Standard sizes 3/8 to 1/2 by BIG GATOR TOOLS #ad - 192v batteries for craftsman c3, 11910 pp2030 11374 935706 11375 130285003 c3 11375 130285003. Relatively low self-discharge, self-discharge is less than half that of nickel-based batteries. V-drill guide, standard sizes 3/8 to 1/2. This new craftsman lithium battery offer longer run time with more power than ni-cad batteries,special cells can provide very high current to multiple craftsman tools. Low maintenance and no memorydesigned to power you though extreme temperatures.

 

316 x 3 long Groo-V Tip Granite Marble and Porcelain Multi-Purpose Drill Bit - Pack of 25 #ad

3/16″ x 3″ long Groo-V Tip Granite, Marble and Porcelain Multi-Purpose Drill Bit – Pack of 25

3/16″ x 3″ long Groo-V Tip Granite, Marble and Porcelain Multi-Purpose Drill Bit – Pack of 25 #ad - 2 mm) drilling depth 1-7/8 in (47. 62 mm) pack of 25 note a drill press, supported drill motor is recommended for drilling hard metal. • Tile • marble • granite • porcelain • masonry • cast iron • hardened steel • designed for drilling marble, granite, porcelain tile, hard metal, plastic, wood, masonry percussion or rotary-only, the groo-v® tip bit makes holes in almost all materials engineered for drilling hard materials, these specialized ram tip bits have a serrated carbide tip, which penetrates faster, up to 50% faster than standard masonry bits point diameter 3/16 in (5 mm) shank diameter 3/16 in (5 mm) overall length 3 in (76. Shank diameter 3/8″ and larger have 3 flats on the shank to reduce the possibility of slipping in the chuck.

 

18 x 3 long Relton Groo-V Tip Granite Marble and Porcelain Multi-Purpose Drill Bit #ad

1/8″ x 3″ long Relton Groo-V Tip Granite, Marble and Porcelain Multi-Purpose Drill Bit

1/8″ x 3″ long Relton Groo-V Tip Granite, Marble and Porcelain Multi-Purpose Drill Bit #ad - Shank diameter 3/8″ and larger have 3 flats on the shank to reduce the possibility of slipping in the chuck. 62 mm) minimum order 1 each note a drill press, supported drill motor is recommended for drilling hard metal. • tile • marble • granite • porcelain • masonry • cast iron • hardened steel • designed for drilling marble, granite, porcelain tile, hard metal, plastic, wood, masonry percussion or rotary-only, the groo-v® tip bit makes holes in almost all materials engineered for drilling hard materials, these specialized ram tip bits have a serrated carbide tip, which penetrates faster, up to 50% faster than standard masonry bits point diameter 1/8 in (3 mm) shank diameter 1-8 in (3 mm) overall length 3 in (76. 2 mm) drilling depth 1-7/8 in (47. .

 

Big Gator Tools SDGMINI MINI V-Drill Guide 21 Drill Sizes by BIG GATOR TOOLS #ad

Big Gator Tools SDGMINI MINI V-Drill Guide 21 Drill Sizes by BIG GATOR TOOLS

Big Gator Tools SDGMINI MINI V-Drill Guide 21 Drill Sizes by BIG GATOR TOOLS #ad - 100% made in u. Covers all tap drill sizes for tap sizes 10-32 down to 0-80. A. 21 drill sizes #10, 21, 25, 29, 30, 1/8, 33, 7/64, 36, 37, 38, 40, 3/32, 43, 45, 47, 5/64, 50, 1/16, 53, 3/64. Side alignment marks allow accurate hole locating. The portable v-drill guide ensures straight and accurate hand drilled holes on flat surfaces, corners and round partsheat treated for durability. S.

 

Magafor 888090H0250  Hard-X Carbide Multi-V Drill Bit 25 mm #ad

Magafor 888090H0250 Hard-X Carbide Multi-V Drill Bit, 2.5 mm

Magafor 888090H0250 Hard-X Carbide Multi-V Drill Bit, 2.5 mm #ad - The product is manufactured in france. Over all length of the product is 15 inches. Material of the product is carbide.

 

V-Drill Guide Metric sizes 3mm to 95mm Tools Equipment Hand Tools #ad

V-Drill Guide, Metric sizes 3mm to 9.5mm Tools Equipment Hand Tools

V-Drill Guide, Metric sizes 3mm to 9.5mm Tools Equipment Hand Tools #ad - 5mm, 6. 5mm heat-treated nickel alloy steel provides durability & accuracy precision ground base provides perpendicular alignment of drill bit on flat surfaces v-groove aligns drill bits on round and square cornered materials v-drill guide automatically aligns drill bits to the work surface for precision alignment similar to a drill press. This product meets the large package requirement per ups/fedex. 3mm, 3. 5mm, 6mm, 6. 5mm, 4mm, 4. 8mm, 7mm, 7. 5mm, 9mm, 9. 5mm, 8mm, 8. Precision ground base provides perpendicular alignment of drill bits on flat surfaces. Compact & portable, the v-drill guide is perfect for field service, shop, industrial and home applications.   Heat treated nickel alloy steel guide provides years of service and accuracy. Drill hole centering alignment marks are provided on both sides of the guide. The estimated shipping cost will include this fee. Features and benefits universal & portable v-drill guide provides perpendicular alignment of drill bits on flat, round or square materials includes 17 metric drill sizes 3mm, 3. 5mm, 5mm, 5. V-groove aligns drill bits on round and square cornered materials. 2mm, 4.   The v-drill guide prevents drill bits from drifting off of center on all surfaces.

 

Big Gator Tools BGT V-drill V-drillguides W25 SAE Standard Hole Sizes 18 - 12 by BIG GATOR TOOLS #ad

Big Gator Tools BGT V-drill V-drillguides W/25 SAE (Standard) Hole Sizes 1/8 – 1/2 by BIG GATOR TOOLS

Big Gator Tools BGT V-drill V-drillguides W/25 SAE (Standard) Hole Sizes 1/8 – 1/2 by BIG GATOR TOOLS #ad - Made in usa, portable, pocket-sized,prevents drill bit wanderround stock hole alignment marks on one sidespecial nickel alloyed steel heat treated for durabilitynon-plated material with light oil coating to prevent rustcenters the holes on pipes, dowels & outside corners.

 

Magafor 888090H1270  Hard-X Carbide Multi-V Drill Bit 12 Diameter #ad

Magafor 888090H1270 Hard-X Carbide Multi-V Drill Bit, 1/2″ Diameter

Magafor 888090H1270 Hard-X Carbide Multi-V Drill Bit, 1/2″ Diameter #ad - Material of the product is carbide. The product is manufactured in france. Over all length of the product is 2375 inches.

 

Magafor 888090H0400  Hard-X Carbide Multi-V Drill Bit 40 mm #ad

Magafor 888090H0400 Hard-X Carbide Multi-V Drill Bit, 4.0 mm

Magafor 888090H0400 Hard-X Carbide Multi-V Drill Bit, 4.0 mm #ad - Material of the product is carbide. Over all length of the product is 2 inches. The product is manufactured in france.

 

Magafor 888092H0500  Hard-X Carbide Multi-V Drill Bit 120 Degree 50 mm #ad

Magafor 888092H0500 Hard-X Carbide Multi-V Drill Bit, 120 Degree, 5.0 mm

Magafor 888092H0500 Hard-X Carbide Multi-V Drill Bit, 120 Degree, 5.0 mm #ad - Over all length of the product is 2 inches. The product is manufactured in france. Material of the product is carbide.

 

Magafor 888092H0800  Hard-X Carbide Multi-V Drill Bit 120 Degree 80 mm #ad

Magafor 888092H0800 Hard-X Carbide Multi-V Drill Bit, 120 Degree, 8.0 mm

Magafor 888092H0800 Hard-X Carbide Multi-V Drill Bit, 120 Degree, 8.0 mm #ad - Material of the product is carbide. Over all length of the product is 275 inches. The product is manufactured in france.

 

Magafor 888090H0476  Hard-X Carbide Multi-V Drill Bit 316 Diameter #ad

Magafor 888090H0476 Hard-X Carbide Multi-V Drill Bit, 3/16″ Diameter

Magafor 888090H0476 Hard-X Carbide Multi-V Drill Bit, 3/16″ Diameter #ad - Over all length of the product is 2 inches. The product is manufactured in france. Material of the product is carbide.

 

Magafor 888092H0600  Hard-X Carbide Multi-V Drill Bit 120 Degree 60 mm #ad

Magafor 888092H0600 Hard-X Carbide Multi-V Drill Bit, 120 Degree, 6.0 mm

Magafor 888092H0600 Hard-X Carbide Multi-V Drill Bit, 120 Degree, 6.0 mm #ad - The product is manufactured in france. Over all length of the product is 2375 inches. Material of the product is carbide.

 

Magafor 888090H0050  Hard-X Carbide Multi-V Drill Bit 05 mm #ad

Magafor 888090H0050 Hard-X Carbide Multi-V Drill Bit, 0.5 mm

Magafor 888090H0050 Hard-X Carbide Multi-V Drill Bit, 0.5 mm #ad - The product is manufactured in france. Over all length of the product is 15 inches. Material of the product is carbide.

 

Magafor 888090H1200  Hard-X Carbide Multi-V Drill Bit 12 mm #ad

Magafor 888090H1200 Hard-X Carbide Multi-V Drill Bit, 12 mm

Magafor 888090H1200 Hard-X Carbide Multi-V Drill Bit, 12 mm #ad - Material of the product is carbide. The product is manufactured in france. Over all length of the product is 2375 inches.

 

Big Gator Tools SDGMINI MINI V-Drill Guide 21 Drill Sizes #ad

Big Gator Tools SDGMINI MINI V-Drill Guide 21 Drill Sizes

Big Gator Tools SDGMINI MINI V-Drill Guide 21 Drill Sizes #ad - Heat treated for durability side alignment marks allow accurate hole locating. The portable v-drill guide ensures straight and accurate hand drilled holes on flat surfaces, corners and round parts. 21 drill sizes #10, 21, 25, 29, 30, 1/8, 33, 7/64, 36, 37, 38, 40, 3/32, 43, 45, 47, 5/64, 50, 1/16, 53, 3/64″. Covers all tap drill sizes for tap sizes 10-32 down to 0-80. 100% made in usa.

 

Magafor 888092H0400  Hard-X Carbide Multi-V Drill Bit 120 Degree 40 mm #ad

Magafor 888092H0400 Hard-X Carbide Multi-V Drill Bit, 120 Degree, 4.0 mm

Magafor 888092H0400 Hard-X Carbide Multi-V Drill Bit, 120 Degree, 4.0 mm #ad - The product is manufactured in france. Over all length of the product is 2 inches. Material of the product is carbide.

 

V-Drill Guide Standard sizes 38 to 12 Tools Equipment Hand Tools #ad

V-Drill Guide, Standard sizes 3/8″” to 1/2″” Tools Equipment Hand Tools

V-Drill Guide, Standard sizes 3/8″” to 1/2″” Tools Equipment Hand Tools #ad - This is a special order item. V-groove aligns drill bits on round and square cornered materials. 2-4 weeks to be shipped.  Compact & portable, the v-drill guide is perfect for field service, shop, inustrial and applications. Precision ground base provides perpendicular alignment of drill bits on flat surfaces.   Heat treated nickel alloy steel guide provides years of service and accuracy. The shipping weight reflected is the dimensional weight. The v-drill guide prevents drill bits from drifting off of center on all surfaces. Orders can take approx. Features and benefits universal & portable v-drill guide provides perpendicular alignment of drill bits on flat, round and square cornered materials includes 9 standard drill sizes 3/8″, 25/64″, 13/32″, 27/64″, 7/16″, 29/64″, 15/32″, 31/64″, 1/2″ heat treated nickel alloy steel provides durability & accuracy precision ground base provides perpendicular alignment of drill bit on flat materials v-groove aligns drill bits on round and square cornered materials v-drill guide automatically aligns drill bit to work surface for precision alignment similar to a drill press. Drill hole centering alignment marks are provided on both sides of the guide. The estimated shipping cost will include this fee. This product also meets the large package requirement per ups/fedex. This product meets the oversized requirement per ups/fedex.

 

316 x 4 long Groo-V Tip Granite Marble and Porcelain Multi-Purpose Drill Bit - Pack of 25 #ad

3/16″ x 4″ long Groo-V Tip Granite, Marble and Porcelain Multi-Purpose Drill Bit – Pack of 25

3/16″ x 4″ long Groo-V Tip Granite, Marble and Porcelain Multi-Purpose Drill Bit – Pack of 25 #ad - 6 mm) drilling depth 2-3/8 in (60. • Tile • marble • granite • porcelain • masonry • cast iron • hardened steel • designed for drilling marble, granite, porcelain tile, hard metal, plastic, wood, masonry percussion or rotary-only, the groo-v® tip bit makes holes in almost all materials engineered for drilling hard materials, these specialized ram tip bits have a serrated carbide tip, which penetrates faster, up to 50% faster than standard masonry bits point diameter 3/16 in (5 mm) shank diameter 3/16 in (5 mm) overall length 4 in (101. 32 mm) pack of 25 note a drill press, supported drill motor is recommended for drilling hard metal. Shank diameter 3/8″ and larger have 3 flats on the shank to reduce the possibility of slipping in the chuck.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.