Top 21 Er25s

 

ER25 COLLETS SET 15 PCs 332 to 58 PRIME QUALITY TESTED RUN OUT 00003

ER25 COLLETS SET 15 PCs 3/32″ to 5/8″ PRIME QUALITY TESTED RUN OUT 0.0003″

ER25 COLLETS SET 15 PCs 3/32″ to 5/8″ PRIME QUALITY TESTED RUN OUT 0.0003″ - Hole size 3/32″, 1/8″, 5/32″, 3/16″, 7/32″, 1/4″, 9/32″, 5/16″, 11/32″, 3/8″, 7/16″, 1/2″, 9/16″, 19/32″, 5/8″. Suitable for r8, mt, cat, bt chuck holders. Indicated fractional size is true imperial size not from metric conversion. Made from alloy spring steel and hardened to hrc 44-48. Tested tir 00003″.

 

GOWE 45kw 12000rpm ER25 Double Motor Spindle for CNC wooden milling

GOWE 4.5kw 12000rpm ER25 Double Motor Spindle for CNC wooden milling

GOWE 4.5kw 12000rpm ER25 Double Motor Spindle for CNC wooden milling - Descriptionswoodworking spindle motor cooling air cooling tools holderer25 maximum speed 12000(rpm) max temperature < 25 degree celsius dynamic balance < 04 (mg) maximum noise < 78 (db) vibration < 0003 (mm) net weight36kg package weight40kg. Thread m30 x 100. L (mm) 20. D(mm) 35.

 

Techniks 18 Shank086-125 RangeInch Size ER25 Precision Collet

Techniks 1/8″ Shank,.086-.125″ Range,Inch Size ER25 Precision Collet

Techniks 1/8″ Shank,.086-.125″ Range,Inch Size ER25 Precision Collet - Unique 8° taper design affords highest gripping power. Techniks 1/8″ shank,086-125″ range,inch size er25 precision. 16 jaws giving powerful gripping & parallel clamping. True double angle, for extreme concentricity.

 

4mm ER25 Spring Collet Chuck CNC Milling Lathe Tool Bit Holder ER25-4

4mm ER25 Spring Collet Chuck CNC Milling Lathe Tool Bit Holder ER25-4

4mm ER25 Spring Collet Chuck CNC Milling Lathe Tool Bit Holder ER25-4 - Product name spring colletmodel no er25-4. Net weight 70g. Package content 1 x spring collet. Gripping diameter 4mmoverall size 26 x 34mm / 1″ x 134″ (maxdh). Material spring steelcolor silver tone.

 

CNC Woodworking Collets Accessories - ER25  ID 34

CNC Woodworking Collets & Accessories – ER25 | ID 3/4

CNC Woodworking Collets & Accessories – ER25 | ID 3/4 - The er collets in inch sizes along with prices are listed below. Select your item(s) then click add to cart. We stock most types of cnc woodworking collets. Check your old collets for the correct number. The number after the dash in the item number is the inside diameter in inches (for example, se04211-116 is 1/16 inch inside diameter). Legend below explains sizing. For er colllets in metric sizes and other brand cnc machine collets, collet sets, nuts, spanner wrenches, tool holders, and accessories, please call 801-592-7835 for pricing and ordering.

 

Z-COLOR 15pcs 2-16mm ER25 Spring Collet Set CNC Workholding Engraving&Milling Lathe Tool

Z-COLOR 15pcs 2-16mm ER25 Spring Collet Set CNC Workholding Engraving&Milling Lathe Tool

Z-COLOR 15pcs 2-16mm ER25 Spring Collet Set CNC Workholding Engraving&Milling Lathe Tool - Material manganese steel. Model er25(15pcs,2mm-16mm). For workholding engraving machine & cnc milling lathe tool. Good elasticity, high precision, run-out tolerance 0012mm(00005″). 100% brand new and high quanlity.

 

T&O 13mm ER25 STEEL SEALED COLLET

T&O 13mm ER25 STEEL SEALED COLLET

T&O 13mm ER25 STEEL SEALED COLLET - Eliminates sealed plugs and coolant discs. Designed for on-size tools. Special angled slots increase rigidity. Protects tool holder from contaminants. Sealed to 2,000 psi.

 

Amana Tool CO-ER25 5-Pc High Precision CNC 18 316 14 38 12 Inch Dia x 34mm Long Spring Col

Amana Tool CO-ER25 5-Pc High Precision CNC 1/8, 3/16, 1/4, 3/8 & 1/2 Inch Dia x 34mm Long Spring Col

Amana Tool CO-ER25 5-Pc High Precision CNC 1/8, 3/16, 1/4, 3/8 & 1/2 Inch Dia x 34mm Long Spring Col - Tolerance is 00003″ maximum. Balanced to 18,000 rpm. Superior finish and craftsmanship. Made of 20crmnti alloy steel. Electrolysis nickel coating.

 

BT40 ER25 Milling Collet Chuck Holder Proj 394 Balance 25000rpm

BT40 ER25 Milling Collet Chuck Holder Proj. 3.94″ Balance 25,000rpm

BT40 ER25 Milling Collet Chuck Holder Proj. 3.94″ Balance 25,000rpm - Made of alloy steel and hardened to hrc 60-62. Balanced to 25,000 rpm tested tir 00001″. Taper bt40. Projection 394″ (100mm) thread m16 x 20p. L1100mm d342mm d14445mm.

 

Amana Tool CO-286 14-Inch Collet for ER25 Nut

Amana Tool CO-286 1/4-Inch Collet for ER25 Nut

Amana Tool CO-286 1/4-Inch Collet for ER25 Nut - Reduces the using of longe cutter, reduce costs, improve efficiency. Precision grinding milling chucks in vitro to eliminate unbalance, increased stability of cutting. Mta is suitable for installing flat bits at the end of morse. The nuts can be tighten directly, high rigidity, strong clamping.

 

ER25 10-9mm Stainless Steel Spring Collet for CNC Chuck Milling Lathe

ER25 10-9mm Stainless Steel Spring Collet for CNC Chuck Milling Lathe

ER25 10-9mm Stainless Steel Spring Collet for CNC Chuck Milling Lathe - . Er collet is the most widely used clamping system in the world used for a variety of machining applications including boring, milling, reaming, tapping and grinding. Collet must be assembled into the clamping nut before inserting into the chuck.

 

BQLZR Silver Precision 40CR Metal MTA3 ER25 Morse Taper Flat Tail Shank Collet Chuck Toolholder

BQLZR Silver Precision 40CR Metal MTA3 ER25 Morse Taper Flat Tail Shank Collet Chuck Toolholder

BQLZR Silver Precision 40CR Metal MTA3 ER25 Morse Taper Flat Tail Shank Collet Chuck Toolholder - Precision grinding milling chucks in vitro to eliminate unbalance, increased stability of cutting. Reduces the using of long cutter, reduce costs, improve efficiency. Mta is suitable for installing flat bits at the end of morse. The nuts can be tighten directly, high rigidity, strong clamping.

 

CycleMore Super Precision 15 PCS 2mm-16mm ER25 ER-25 Spring Collet Set for CNC Engraving Machine Milling Lathe Tool

CycleMore Super Precision 15 PCS (2mm-16mm) ER25 ER-25 Spring Collet Set for CNC Engraving Machine & Milling Lathe Tool

CycleMore Super Precision 15 PCS (2mm-16mm) ER25 ER-25 Spring Collet Set for CNC Engraving Machine & Milling Lathe Tool - 100% brand new and high quanlity. For cnc milling lathe tool & workholding engraving machine. Materialhigh grade 65mn. Package inclued15pcs er25 , 2mm to 16mm (2mm, 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm). Good elasticity, high precision, run-out tolerance0012mm(00005″).

 

ER25 Cartridge spindle for UNIMAT SL DB Lathes - ER lathe spindle - LatheCity

ER25 Cartridge spindle for UNIMAT SL DB Lathes – ER lathe spindle – LatheCity

ER25 Cartridge spindle for UNIMAT SL DB Lathes – ER lathe spindle – LatheCity - The cartridge spindle comes complete with a pulley (al, o. 2-1/4″), collet nut, collet wrench, manual, mounting instructions. The cartridge has a keyway but no rack milled in. Collets are not included. Anyway, collet wrench is included. D. 0006″ on the spindle, but we do not guarantee a specific runout since this depends very much on the measuring procedure, collets, and rod used. The hole through the spindle has o. We did measure a tir of 0. The collet wrench may look different than the version shown in image, most have one lever some have two lever on the wrench. Lathe is not included. The cartridge spindle has two bearings. 002″ at best. Standard unimat spindle has 0. D. 10 mm (3/8″). Max rpm 2800 small loads as typical for a jewelry size lathe only. Size complete cartridge spindle that fits on an original unimat sl db lathe. The spindle fits er 25 collets.

 

BQLZR Silver Precision 40CR Metal MTB2 ER25 Morse Taper Back Pull Shank Collet Chuck Toolholder

BQLZR Silver Precision 40CR Metal MTB2 ER25 Morse Taper Back Pull Shank Collet Chuck Toolholder

BQLZR Silver Precision 40CR Metal MTB2 ER25 Morse Taper Back Pull Shank Collet Chuck Toolholder - The nuts can be tighten directly, high rigidity, strong clamping. Fit for morse vertebral spindle milling machine. Precision grinding milling chucks in vitro to eliminate unbalance, increased stability of cutting. Reduces the using of long cutter, reduce costs, improve efficiency.

 

CNC Milling Collet Chuck - TOOGOORER25 MT2 M10 CNC Collet Chuck Holder Milling Collet Chuck drawbars

CNC Milling Collet Chuck – TOOGOO(R)ER25 MT2 M10 CNC Collet Chuck Holder Milling Collet Chuck drawbars

CNC Milling Collet Chuck – TOOGOO(R)ER25 MT2 M10 CNC Collet Chuck Holder Milling Collet Chuck drawbars - Only authorized seller of toogoo can sell under toogoo listings. Toogoo is a registered trademark. The measurement allowed error is +/- 1-3 cm. Toogoo(r)er25 mt2 m10 cnc collet chuck holder milling collet chuck drawbarspackage included1 x er25 mt2 collet chucknotelight shooting and different displays may cause the color of the item in the picture a little different from the real thing. Our products will enhance your experience to unparalleled inspiration.

 

MT2 ER25 Collet Chuck Tool Holder Set 15 Pcs ER25 Collets Holder

MT2 ER25 Collet Chuck Tool Holder Set 15 Pcs ER25 Collets Holder

MT2 ER25 Collet Chuck Tool Holder Set 15 Pcs ER25 Collets Holder - Collets size (in inch) 3/32, 1/8, 5/32, 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 7/16, 1/2, 9/16, 19/32, 5/8. 1 mt2 collets holder, 15pcs er25 collets, 1 wrench. Alloy steel and hardened to hrc 60-62 tested tir 00001″. Taper morse taper 2, mt2. Back bar thread m10 x 150p.

 

ER25 Spring Collet Set 116 - 58 15 Pc Set

ER25 Spring Collet Set 1/16″ – 5/8″ 15 Pc Set

ER25 Spring Collet Set 1/16″ – 5/8″ 15 Pc Set - These collets have a unique 8 degree taper and a 16 jaw for powerful grip. This set has spring collets of the following size 1/16 inch, 3/32 inch, 1/8 inch, 3/16 inch, 7/32 inch, 1/4 inch, 5/16 inch, 11/32 inch,3/8 inch, 13/32 inch, 7/16 inch, 1/2 inch, 17/32 inch, 9/16 inch, 5/8 inch.

 

Metaltech Wrench for Collet Chuck Bearing Nut ER25 W-N-ER25-B

Metaltech, Wrench for Collet Chuck Bearing Nut ER25. W-N-ER25-B

Metaltech, Wrench for Collet Chuck Bearing Nut ER25. W-N-ER25-B - | This wrench is intended to be used on any er tool holders. | Nut type, er25 bearing type. | Specifications | length (l) 235 mm(9 1/4in) | opening (c) 43 mm(1 11/16in) | suit for er25 collet nut (n-b-er25) | weight 0. W-n-er25-b | wrench for er bearing type nut. Metaltech, wrench for collet chuck bearing nut er25. | Collet type, er25. 21 kg | brand metaltech | condition new | country of origin taiwan |.

 

MT3 ER25 Collet Chuck Tool Holder Set 15 Pcs ER25 Collets Holder

MT3 ER25 Collet Chuck Tool Holder Set 15 Pcs ER25 Collets Holder

MT3 ER25 Collet Chuck Tool Holder Set 15 Pcs ER25 Collets Holder - Back bar thread m12 x 175p. Taper morse taper 3, mt3. Alloy steel and hardened to hrc 60-62 tested tir 00001″. 1 mt3 collets holder, 15pcs er 25collets, 1 wrench. Collets size 3/32, 1/8, 5/32, 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 7/16, 1/2, 9/16, 19/32, 5/8 inch.

 

BT30 ER25 Milling Collet Chuck Holder Proj 276 Balance 25000rpm

BT30 ER25 Milling Collet Chuck Holder Proj. 2.76″ Balance 25,000rpm

BT30 ER25 Milling Collet Chuck Holder Proj. 2.76″ Balance 25,000rpm - Thread m12 x 175p. Projection 276″ (70mm). Balanced to 25,000 rpm tested tir 00001″. Made of alloy steel and hardened to hrc 60-62. Taper bt30.