Top 23 Best Drilling Steels in 2020

 

Cobalt M35 Metric Drill kit by TTP HARD Drills 19 Piece Drill bit Set 1mm-10mm x 05mm  Added Cobalt for Drilling Harder Metals Easy to use Long Life  Easily Drill Chrome Stainless Steel

Cobalt M35 Metric Drill kit by TTP HARD Drills |19 Piece Drill bit Set 1mm-10mm x 0.5mm | Added Cobalt for Drilling Harder Metals |Easy to use & Long Life | Easily Drill Chrome & Stainless Steel

Cobalt M35 Metric Drill kit by TTP HARD Drills |19 Piece Drill bit Set 1mm-10mm x 0.5mm | Added Cobalt for Drilling Harder Metals |Easy to use & Long Life | Easily Drill Chrome & Stainless Steel - Designed for easy and effective drilling of metals including the harder alloys. Heavy duty flute design. Superior hardness due to tungsten and molybdenum base. High temperature resistance due to addition of cobalt. 135 degree split point makes entire point of the bit one long cutting edge.

 

Stainless Steel Sheet Metal Screw Plain Finish Flat Head Phillips Drive Self-Drilling Point 34 Length 6-20 Threads Pack of 100

Stainless Steel Sheet Metal Screw, Plain Finish, Flat Head, Phillips Drive, Self-Drilling Point, 3/4″ Length, #6-20 Threads (Pack of 100)

Stainless Steel Sheet Metal Screw, Plain Finish, Flat Head, Phillips Drive, Self-Drilling Point, 3/4″ Length, #6-20 Threads (Pack of 100) - Stainless steels are used for their corrosion resistance, high-temperature strength, scaling resistance, and low-temperature toughness.   These properties account for their extremely wide use in practically every industry. Where the 18 refers to the % of chromium and 8 to the % of nickel contained in the material. Austenitic stainless steels are alloys of iron and carbon that contain between 16% and 30% chromium, a maximum of 0. Length is measured from the top of the head. Sheet metal screws have a pointed end and widely spaced threads.    Austenitic stainless steels are designated by a 3 digit sae stainless steel grade beginning with the number 3 (e.   Another common naming convention for austenitic stainless steels are 18/8, 18/10, 18/0, etc.   The chromium, which helps develop a passive surface oxide film, provides corrosion resistance in stainless steels. The phillips drive style was originally designed so that the driver would slip out under extreme torque, preventing over-tightening and damage to the fastener or the material. 304, 316).     Flat head fasteners are designed to fit flush to the surface when used with countersunk holes. 15% carbon, along with nickel (or manganese), and other alloying elements. Self-drilling points are excellent for use with sheet metal. They’re self-starting in thin sheet metal, but in thicker materials a drilled hole is recommended. G.

 

Steel Self-Drilling Screw Zinc Plated Finish Hex Washer Head External Hex Drive Self-Drilling Point Sealing Includes Washer 1 14 Length 8 Threads Pack of 100

Steel Self-Drilling Screw, Zinc Plated Finish, Hex Washer Head, External Hex Drive, Self-Drilling Point, Sealing, Includes Washer, 1 1/4″ Length, #8 Threads (Pack of 100)

Steel Self-Drilling Screw, Zinc Plated Finish, Hex Washer Head, External Hex Drive, Self-Drilling Point, Sealing, Includes Washer, 1 1/4″ Length, #8 Threads (Pack of 100) - Length is measured from under washer. The underside of the head provides a large flat bearing surface that reduces the likelihood of crushing mating surfaces. When you drive this screw, a flexible black epdm rubber washer bonded to a metal washer compresses, forming a tight seal. Ideal for metal structures and assemblies. All you need to install them is a power driver. Fully threaded. The washer and hex head are formed together as one piece. Unlike tapping screws, these screws drill a hole and tap a thread in a single operation. Head height includes compressible washer. For effective fastening, the drilling point must fully penetrate all pieces of material being fastened before the first thread engages. Zinc-plated steel offers good corrosion resistance.

 

Max-Craft 14 Inch 10Pcs M35 HSS Cobalt Jobber Length HSS Co HSS E Twist Drill Bit135 Point Angle Split Point Drilling Steel Metal Iron Aluminium Copper Plastic

Max-Craft 1/4″ Inch 10Pcs M35 HSS Cobalt Jobber Length HSS Co HSS E Twist Drill Bit135 Point Angle Split Point, Drilling Steel, Metal, Iron, Aluminium, Copper, Plastic.

Max-Craft 1/4″ Inch 10Pcs M35 HSS Cobalt Jobber Length HSS Co HSS E Twist Drill Bit135 Point Angle Split Point, Drilling Steel, Metal, Iron, Aluminium, Copper, Plastic. - ● diameter 1/4″ flute length 2-3/4″ overall length 4″ hss e hss co cobalt drill bits. ● Hss cobalt high speed steel, best material for improving performance and drilling life when cutting and drilling harder metals, such as stainless steel, or other hard steel. ● The gold oxide strongthen the surface by oxiding treatment on the cobalt steel, to ensure the long drilling life and better drilling performance. ● The 135 deg split point to ensure the best positioning and better drilling performance. ● Round shank allow use with a wide variety of tool holding systems.

 

8-18 x 2 12 Pro Self Drilling Screw Phillips K-Lath 2 Point Low Carbon Steel Zinc Plated Pk 100

#8-18 x 2 1/2″ Pro Self Drilling Screw Phillips K-Lath #2 Point Low Carbon Steel Zinc Plated Pk 100

#8-18 x 2 1/2″ Pro Self Drilling Screw Phillips K-Lath #2 Point Low Carbon Steel Zinc Plated Pk 100 - All asmc industrial fasteners are guaranteed to be of the highest quality and are fully traceable and lot-controlled. Please see the specifications in the table below for full details if you have any questions or doubts, or if your requirements include specific dimensions, please contact us prior to placing your order. Asmc industrial offers a comprehensive selection industrial, automotive, and construction fasteners our parts are high-quality, at low prices, shipped from stock we also feature a full line of usa-made fasteners, including grade 5 and grade 8 hex cap screws, sockets, stainless products, nuts, and washers. Pictures are representative of item, but are not of the actual item product dimensions, finish, head markings, thread length, stamping shape or forging shape, etc, may differ from picture products are guaranteed to meet the specifications to which they are manufactured specifications allow for tolerances in dimension and shape, which can vary from lot to lot.

 

Ginode 15Pcs Metric M35 Cobalt Steel Drill Set Heat Resistant Twist Drill Bits with Straight Shank 15-10MM Steel Pounch Split Point Drilling For Metal Steel with 1Pc Automatic Center Punch

Ginode 15Pcs Metric M35 Cobalt Steel Drill Set Heat Resistant Twist Drill Bits with Straight Shank 1.5-10MM Steel Pounch Split Point Drilling For Metal Steel with 1Pc Automatic Center Punch

Ginode 15Pcs Metric M35 Cobalt Steel Drill Set Heat Resistant Twist Drill Bits with Straight Shank 1.5-10MM Steel Pounch Split Point Drilling For Metal Steel with 1Pc Automatic Center Punch - ▲Marks workpiece with a dimple, creating a starting point that prevents screws and drills from wandering. ▲designed for heavy duty use in all metals, including hard metals. ▲15pcs hss drill set, straight shank & twisted drills, chisel edge reduces drilling resistance. ▲1pc automatic center punch, brass body has a deeply knurled surface for nonslip control. ▲Package includes 15x cobalt steel drill bits, 1x automatic center punch.

 

WENKO 20889100 Vacuum-Loc 2-Tier wall rack Bari - fixing without drilling Steel 102 x 15 x 67 inch Chrome

WENKO 20889100 Vacuum-Loc 2-Tier wall rack Bari – fixing without drilling, Steel, 10.2 x 15 x 6.7 inch, Chrome

WENKO 20889100 Vacuum-Loc 2-Tier wall rack Bari – fixing without drilling, Steel, 10.2 x 15 x 6.7 inch, Chrome - Divided into 2 baskets, bathroom utensils can be accommodated in a space-saving manner. The vacuum-locs can be re-positioned anywhere again and again and can be removed without leaving any residue. Each mounting loc has a load-bearing tensile force of up to 33 kg. The worldwide innovation in mounting technology is called vacuum-loc the unique system enables fast, easy and reliable attachment of the accessories on all air-impermeable and uneven surfaces. The vacuum-loc wall rack bari offers a strong hold and convincing quality on 2 tiers. The new vacuum-loc system consists of a pump and mounting locs there is no need for drilling or screwing, and even suction pads are not necessary. The vacuum-loc system has a european patent protection and guarantees a firm hold.

 

Zinc Plated Steel Self-Drilling Screw Pan Head Phillips Drive 2 Drill Point 10-16 Thread Size 12 inches Length Pack of 100

Zinc Plated Steel Self-Drilling Screw, Pan Head, Phillips Drive, #2 Drill Point, #10-16 Thread Size, 1/2 inches Length (Pack of 100)

Zinc Plated Steel Self-Drilling Screw, Pan Head, Phillips Drive, #2 Drill Point, #10-16 Thread Size, 1/2 inches Length (Pack of 100) - Pan head allows for higher tightening torques. Create their own threads when driven into material. Zinc plated steel fasteners are suitable where strength and corrosion resistance are primary considerations. Phillips drive is designed to cam out under too much torque.

 

HZ-DT6 6PCS Drill Bit Set Hand Tap Drill Hex Shank HSS Screw Spiral Point Thread Metric Plug Hole Drill Bits M3 M4 M5 M6 M8 M10 Hand Tool Set for drilling steel wood

HZ-DT6 6PCS Drill Bit Set Hand Tap Drill Hex Shank HSS Screw Spiral Point Thread Metric Plug Hole Drill Bits M3 M4 M5 M6 M8 M10 Hand Tool Set for drilling steel wood

HZ-DT6 6PCS Drill Bit Set Hand Tap Drill Hex Shank HSS Screw Spiral Point Thread Metric Plug Hole Drill Bits M3 M4 M5 M6 M8 M10 Hand Tool Set for drilling steel wood - High quality hand tap drill hex shank hss screw spiral point thread metric plug drill bits. Shank1/4 inch (635mm) hex shankmetric m3x05, m4x07, m5x08, m6x1, m8x125, m10x15. More durable have sufficient bending strength and wear resistance. Drilling and tapping in one, one-step processing, greatly save processing steps and time costs, improve working efficiency. Suitable for drilling, tapping, cutting on soft metal, aluminum plate, iron, etc.

 

10 Pcs Pack 332 Inch M35 HSS Cobalt Drill Bit Jobber Length Drill Bits Twist Drill Bits 135 Deg Split Point Drilling Steel Meteal Iron

10 Pcs Pack 3/32″ Inch M35 HSS Cobalt Drill Bit Jobber Length Drill Bits Twist Drill Bits 135 Deg. Split Point Drilling Steel, Meteal, Iron.

10 Pcs Pack 3/32″ Inch M35 HSS Cobalt Drill Bit Jobber Length Drill Bits Twist Drill Bits 135 Deg. Split Point Drilling Steel, Meteal, Iron. - 3/32 inch hss cobalt co5% fully ground jobber length twist drills general purpose. 10pcs packed in a plastic bag for easy usage and store. 135-degree split-point tip starts drilling immediately with less force and eliminates “walking” across the work surface. M35 cobalt high speed steel for drilling steel, stainless steel, hard metal and iron. Ideal for drilling in tough metal, including heavy-duty abrasive alloy metal drilling on hardened steel.

 

MAX-CRAFT 20Pcs 14 HSS Cobalt Drill Bit Jobber Length Twist Drill Bits HSS Drill Bit General Purpose 135 DegSplit Point Drilling Stainless Steel Metal Iron Copper 14-20PCS

MAX-CRAFT 20Pcs 1/4″ HSS Cobalt Drill Bit Jobber Length Twist Drill Bits HSS Drill Bit General Purpose 135 Deg.Split Point, Drilling Stainless Steel, Metal, Iron, Copper… (1/4″-20PCS)

MAX-CRAFT 20Pcs 1/4″ HSS Cobalt Drill Bit Jobber Length Twist Drill Bits HSS Drill Bit General Purpose 135 Deg.Split Point, Drilling Stainless Steel, Metal, Iron, Copper… (1/4″-20PCS) - Cobalt for much higher hot hardness and abrasion resistance. Ideal for drilling in tough metal, including heavy-duty abrasive alloy metal drilling on hardened steel. 135-degree split-point tip starts drilling immediately with less force and eliminates “walking” across the work surface. M35 cobalt high speed steel for drilling steel, stainless steel, hard metal and iron. Diameter 1/4″ flute length 2-3/4″ overall length 4″ hss e hss co cobalt drill bits.

 

Max-Craft 10 Pcs Pack 14 Inch HSS Cobalt M35 Stubby Body Panel HSS Co5 Double End Drill Bits 135-Degree Split Point Drilling Steel Iron Metal Aluminium Copper

Max-Craft 10 Pcs Pack 1/4″ Inch HSS Cobalt M35 Stubby Body Panel HSS Co5% Double End Drill Bits, 135-Degree Split Point Drilling Steel, Iron, Metal, Aluminium, Copper.

Max-Craft 10 Pcs Pack 1/4″ Inch HSS Cobalt M35 Stubby Body Panel HSS Co5% Double End Drill Bits, 135-Degree Split Point Drilling Steel, Iron, Metal, Aluminium, Copper. - √Designed for drilling steel, metal sheet, aluminum, cast iron with 2 cutting points can drill more life time. √Made of high quality premium hss material, cobalt high speed steel to ensure the double end drill bits strong and double life-time compared with other drill bits. √precision ground, bright finish with polished flutes that increase chip ejection. √Hardened and tempered cobalt m35 high-speed steel double-end bits can be reversed if one side is worn. 135-degree split point for fast penetration and accurate starting with no center punch.

 

25 Sammys 38-16 x 1-12 Threaded Rod Hanger for Steel 8041957 Self-Drilling

(25) Sammys 3/8-16 x 1-1/2 Threaded Rod Hanger for Steel 8041957 Self-Drilling

(25) Sammys 3/8-16 x 1-1/2 Threaded Rod Hanger for Steel 8041957 Self-Drilling - Lot of (25) sammys / itw buildex number 8041957 threaded rod hangers. These fasteners are designed for use in steel and feature a 1-1/2″ self-drilling screw length with threads for 3/8-16 rod.

 

Stainless Steel Sheet Metal Screw Plain Finish Hex Head External Hex Drive Self-Drilling Point 12 Length 8-18 Threads Pack of 100

Stainless Steel Sheet Metal Screw, Plain Finish, Hex Head, External Hex Drive, Self-Drilling Point, 1/2″ Length, #8-18 Threads (Pack of 100)

Stainless Steel Sheet Metal Screw, Plain Finish, Hex Head, External Hex Drive, Self-Drilling Point, 1/2″ Length, #8-18 Threads (Pack of 100) - Self-drilling points are excellent for use with sheet metal. G. 304, 316). Sheet metal screws have a pointed end and widely spaced threads. Austenitic stainless steels are alloys of iron and carbon that contain between 16% and 30% chromium, a maximum of 0. Stainless steels are used for their corrosion resistance, high-temperature strength, scaling resistance, and low-temperature toughness. Where the 18 refers to the % of chromium and 8 to the % of nickel contained in the material.     Hex head fasteners can be driven with simple wrenches, and require minimal clearance above the fastener because they can be driven or loosened from the side. 15% carbon, along with nickel (or manganese), and other alloying elements. They’re self-starting in thin sheet metal, but in thicker materials a drilled hole is recommended.   The chromium, which helps develop a passive surface oxide film, provides corrosion resistance in stainless steels.   Another common naming convention for austenitic stainless steels are 18/8, 18/10, 18/0, etc.   These properties account for their extremely wide use in practically every industry.    Austenitic stainless steels are designated by a 3 digit sae stainless steel grade beginning with the number 3 (e.

 

5 Pcs Pack 2164 Inch M35 HSS Cobalt Drill Bit Jobber Length Drill Bits Twist Drill Bits 135 Deg Split Point Drilling Steel Meteal Iron

5 Pcs Pack 21/64″ Inch M35 HSS Cobalt Drill Bit Jobber Length Drill Bits Twist Drill Bits 135 Deg. Split Point Drilling Steel, Meteal, Iron.

5 Pcs Pack 21/64″ Inch M35 HSS Cobalt Drill Bit Jobber Length Drill Bits Twist Drill Bits 135 Deg. Split Point Drilling Steel, Meteal, Iron. - ●135-degree split-point tip starts drilling immediately with less force and eliminates “walking” across the work surface. ●5pcs packed in a plastic bag for easy usage and store. ● diameter 21/64″ flute length 3-5/16″ overall length 4-5/8″ hss e hss co cobalt drill bits. ●Ideal for drilling in tough metal, including heavy-duty abrasive alloy metal drilling on hardened steel. ●M35 cobalt high speed steel for drilling steel, stainless steel, hard metal and iron.

 

25 Sammys 14-20 x 2 Threaded Rod Hanger for Steel 8027957 Self-Drilling

(25) Sammys 1/4-20 x 2 Threaded Rod Hanger for Steel 8027957 Self-Drilling

(25) Sammys 1/4-20 x 2 Threaded Rod Hanger for Steel 8027957 Self-Drilling - Lot of (25) sammys / itw buildex number 8027957 threaded rod hangers. These fasteners are designed for use in steel and feature a 2″ self-drilling screw length with threads for 1/4-20 rod.

 

U-Turn - 12-24 x 1-12 Tek 5 Stainless Steel Screws Hex Self-Drilling 50 Pack

U-Turn – 12-24 x 1-1/2 Tek 5 Stainless Steel Screws Hex Self-Drilling (50 Pack)

U-Turn – 12-24 x 1-1/2 Tek 5 Stainless Steel Screws Hex Self-Drilling (50 Pack) - 500 hr salt spray resistance | acq lumber compatible. Tek 5 point, gives screw a drill capacity of 125″ all the way up to 500″ when drilling steel or aluminum. 410 stainless steel, a magnetic, hardenable grade of stainless steel provides good corrosion resistance in mild atmospheres. Curved groove in threads, provides for excellent chip evacuation during installation.

 

14 M35 Cobalt HSS Jobber Length Twist Drill Bit with Straight ShankHeavy Duty Pack of 10 PCS Drilling for Cast Iron Heat-treated Steel Stainless Steel and Other Hard Materials

1/4″ M35 Cobalt HSS Jobber Length Twist Drill Bit with Straight Shank,Heavy Duty, Pack of 10 PCS, Drilling for Cast Iron, Heat-treated Steel, Stainless Steel and Other Hard Materials

1/4″ M35 Cobalt HSS Jobber Length Twist Drill Bit with Straight Shank,Heavy Duty, Pack of 10 PCS, Drilling for Cast Iron, Heat-treated Steel, Stainless Steel and Other Hard Materials - Product information 10 drill bits each kit contains a total of ten drill bits in the same size. Easy to carrythe twist drill bits are housed in plastic case for easy storage, easy to carry out homework. Accurate and neat 135°quick-cut points are self-centering and penetrate quickly with less pressure will not “walk” or “wander”. Multi-purpose use drills are successful in cutting hard metals such as stainless steel and cast iron, and also can be used for softer materials. Excellent performance bits are extremely heat resistant straight shank allows for firmly holding and accurate centering, fit for standard drill chucks and regular round collet chucks.

 

NGe 20pcs 1mm HSS Twist Drill High Speed Steel Bit Micro Drill Bit for Drilling Steel Copper Aluminum Alloy Wood

NGe 20pcs 1mm HSS Twist Drill High Speed Steel Bit, Micro Drill Bit for Drilling Steel, Copper, Aluminum Alloy, Wood

NGe 20pcs 1mm HSS Twist Drill High Speed Steel Bit, Micro Drill Bit for Drilling Steel, Copper, Aluminum Alloy, Wood - Perfect for stainless steel, copper, aluminum alloy,as well suit for wood,plastic. Product name, micro twist drill bit. Package content 20pcs x micro twist drill bit. Material, high speed steel 4241, durable, higher heat & abrasion resistance. Shank / cutting edge diameter 1mm cutting edge length 11mm total length 33mm.

 

Zinc Plated Steel Self-Drilling Screw Pan Head Phillips Drive 3 Drill Point 10-16 Thread Size 1-14 inches Length Pack of 100

Zinc Plated Steel Self-Drilling Screw, Pan Head, Phillips Drive, #3 Drill Point, #10-16 Thread Size, 1-1/4 inches Length (Pack of 100)

Zinc Plated Steel Self-Drilling Screw, Pan Head, Phillips Drive, #3 Drill Point, #10-16 Thread Size, 1-1/4 inches Length (Pack of 100) - Zinc plated steel fasteners are suitable where strength and corrosion resistance are primary considerations. Create their own threads when driven into material. Pan head allows for higher tightening torques. Phillips drive is designed to cam out under too much torque.

 

Steel Self-Drilling Screw Zinc Plated Finish Hex Washer Head External Hex Drive Sealing Includes Washer 2 Length 10-16 Threads Pack of 100

Steel Self-Drilling Screw, Zinc Plated Finish, Hex Washer Head, External Hex Drive, Sealing, Includes Washer, 2″ Length, #10-16 Threads (Pack of 100)

Steel Self-Drilling Screw, Zinc Plated Finish, Hex Washer Head, External Hex Drive, Sealing, Includes Washer, 2″ Length, #10-16 Threads (Pack of 100) - Hex head fasteners can be driven with simple wrenches, and require minimal clearance above the fastener because they can be driven or loosened from the side.   The steel used in these fasteners has a tensile strength ranging from 100,000 to 150,000 psi (pounds per square inch). Self tapping screws are designed to advance when turned, creating their own threads in the material.   The last 2 digits identify the percentage of carbon for the alloy (in hundredths).   Zinc plating helps to prevent corrosion.   The first two digits indicate the primary materials used to form the steel. They are often used in sheet metal and plastic. Steels are designated by a 4 number sae steel grade.

 

Sutemribor 270 Pieces 410 Stainless Steel Self Drilling Screws Set 8 Pan Head

Sutemribor 270 Pieces 410 Stainless Steel Self Drilling Screws Set (#8 Pan Head)

Sutemribor 270 Pieces 410 Stainless Steel Self Drilling Screws Set (#8 Pan Head) - √ Size #8 x 1/2”, #8 x 5/8”, #8 x 3/4”, #8 x 1”, #8 x 1-1/4”, #8 x 1-1/2”, total 6 different sizes, can meet your different needs. √ Widely application self-drilling screws it is wood drill tail screw, mainly used in steel structure caigang watt fixed can also be used for fixing the simple construction of the sheet material. √ Material high quality 410 stainless steel, stainless steel with superior rust resistant ensure, more solid and not easy to break. √ Installation self-drilling screws, eliminate the need for a pre-drilled hole the length of the drill point determines the material thickness which the screw can reliably penetrate when selecting a self-drilling screw design, it is important to consider the material thickness and type of materials to be joined these stainless are great to use in environments that are damp. √ product feature modified truss head is extra wide with a low-profile dome and integral round washer, phillips driver designed to prevent over-tightening.

 

8 x 1 Stainless Hex Washer Head Self Drilling Screws 100pc 410 Stainless Steel Self Tapping Choose Size and Qty

#8 x 1″ Stainless Hex Washer Head Self Drilling Screws, (100pc) 410 Stainless Steel Self Tapping Choose Size and Qty

#8 x 1″ Stainless Hex Washer Head Self Drilling Screws, (100pc) 410 Stainless Steel Self Tapping Choose Size and Qty - Lifetime guarantee we are so confident that our product is the best on the market that we offer a no hassle lifetime guarantee. Hex washer head stripping a screw head is a thing of the past with our hex head screws put a socket on that impact or drill and fasten away. High quality stainless these hex washer head self drilling tek screws are 100% 410 stainless steel which is one of the highest forms of corrosion resistant steel, making it last longer than other hardware on the market today. Self tapping our hardware is very strong and is great for both indoor and outdoor use the stainless steel is superior to regular steel and provides excellent rust resistance in water applications. Great to keep around bolt dropper hardware is great to have around for use in wood and wet environments bolt dropper screws are the highest quality available on the market and we stand by our claim 100% they are strong, corrosion resistant and will support all of your projects.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.